| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240112153348.2778-2-quic_nitirawa@quicinc.com>
Date: Fri, 12 Jan 2024 21:03:47 +0530
From: Nitin Rawat <quic_nitirawa@...cinc.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
"James E.J. Bottomley" <jejb@...ux.ibm.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
Philipp Zabel <p.zabel@...gutronix.de>
Cc: linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-scsi@...r.kernel.org,
Nitin Rawat <quic_nitirawa@...cinc.com>,
Can Guo <quic_cang@...cinc.com>,
Naveen Kumar Goud Arepalli <quic_narepall@...cinc.com>
Subject: [PATCH V1 1/2] scsi: ufs: qcom : Refactor phy_power_on/off calls
Commit 3f6d1767b1a0 ("phy: ufs-qcom: Refactor all init steps into
phy_poweron") removes the phy_power_on/off from ufs_qcom_setup_clocks
to suspend/resume func.
To have a better power saving, remove the phy_power_on/off calls from
resume/suspend path and put them back to ufs_qcom_setup_clocks, so that
PHY's regulators & clks can be turned on/off along with UFS's clocks.
Since phy phy_power_on is separated out from phy calibrate, make
separate calls to phy_power_on and phy_calibrate calls from ufs qcom
driver.
Also add a mutex lock to protect the usage of is_phy_pwr_on against
possible racing.
Co-developed-by: Can Guo <quic_cang@...cinc.com>
Signed-off-by: Can Guo <quic_cang@...cinc.com>
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@...cinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@...cinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@...cinc.com>
---
drivers/ufs/host/ufs-qcom.c | 104 +++++++++++++++++++++++-------------
drivers/ufs/host/ufs-qcom.h | 4 ++
2 files changed, 72 insertions(+), 36 deletions(-)
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 39eef470f8fa..2721a30f0db8 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -338,6 +338,46 @@ static u32 ufs_qcom_get_hs_gear(struct ufs_hba *hba)
return UFS_HS_G3;
}
+static int ufs_qcom_phy_power_on(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ struct phy *phy = host->generic_phy;
+ int ret = 0;
+
+ mutex_lock(&host->phy_mutex);
+ if (!host->is_phy_pwr_on) {
+ ret = phy_power_on(phy);
+ if (ret) {
+ mutex_unlock(&host->phy_mutex);
+ return ret;
+ }
+ host->is_phy_pwr_on = true;
+ }
+ mutex_unlock(&host->phy_mutex);
+
+ return ret;
+}
+
+static int ufs_qcom_phy_power_off(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ struct phy *phy = host->generic_phy;
+ int ret = 0;
+
+ mutex_lock(&host->phy_mutex);
+ if (host->is_phy_pwr_on) {
+ ret = phy_power_off(phy);
+ if (ret) {
+ mutex_unlock(&host->phy_mutex);
+ return ret;
+ }
+ host->is_phy_pwr_on = false;
+ }
+ mutex_unlock(&host->phy_mutex);
+
+ return ret;
+}
+
static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
@@ -378,13 +418,18 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
goto out_disable_phy;
/* power on phy - start serdes and phy's power and clocks */
- ret = phy_power_on(phy);
+ ret = ufs_qcom_phy_power_on(hba);
if (ret) {
dev_err(hba->dev, "%s: phy power on failed, ret = %d\n",
__func__, ret);
goto out_disable_phy;
}
+ ret = phy_calibrate(phy);
+ if (ret) {
+ dev_err(hba->dev, "%s: Failed to calibrate PHY %d\n",
+ __func__, ret);
+ }
ufs_qcom_select_unipro_mode(host);
return 0;
@@ -557,26 +602,17 @@ static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
enum ufs_notify_change_status status)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
- struct phy *phy = host->generic_phy;
if (status == PRE_CHANGE)
return 0;
- if (ufs_qcom_is_link_off(hba)) {
- /*
- * Disable the tx/rx lane symbol clocks before PHY is
- * powered down as the PLL source should be disabled
- * after downstream clocks are disabled.
- */
+ if (!ufs_qcom_is_link_active(hba))
ufs_qcom_disable_lane_clks(host);
- phy_power_off(phy);
- /* reset the connected UFS device during power down */
- ufs_qcom_device_reset_ctrl(hba, true);
- } else if (!ufs_qcom_is_link_active(hba)) {
- ufs_qcom_disable_lane_clks(host);
- }
+ /* reset the connected UFS device during power down */
+ if (ufs_qcom_is_link_off(hba) && host->device_reset)
+ ufs_qcom_device_reset_ctrl(hba, true);
return ufs_qcom_ice_suspend(host);
}
@@ -584,26 +620,11 @@ static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
- struct phy *phy = host->generic_phy;
int err;
- if (ufs_qcom_is_link_off(hba)) {
- err = phy_power_on(phy);
- if (err) {
- dev_err(hba->dev, "%s: failed PHY power on: %d\n",
- __func__, err);
- return err;
- }
-
- err = ufs_qcom_enable_lane_clks(host);
- if (err)
- return err;
-
- } else if (!ufs_qcom_is_link_active(hba)) {
- err = ufs_qcom_enable_lane_clks(host);
- if (err)
- return err;
- }
+ err = ufs_qcom_enable_lane_clks(host);
+ if (err)
+ return err;
return ufs_qcom_ice_resume(host);
}
@@ -908,6 +929,7 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
enum ufs_notify_change_status status)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ int err;
/*
* In case ufs_qcom_init() is not yet done, simply ignore.
@@ -926,10 +948,22 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
/* disable device ref_clk */
ufs_qcom_dev_ref_clk_ctrl(host, false);
}
+ err = ufs_qcom_phy_power_off(hba);
+ if (err) {
+ dev_err(hba->dev, "%s: phy power off failed, ret=%d\n",
+ __func__, err);
+ return err;
+ }
}
break;
case POST_CHANGE:
if (on) {
+ err = ufs_qcom_phy_power_on(hba);
+ if (err) {
+ dev_err(hba->dev, "%s: phy power on failed, ret = %d\n",
+ __func__, err);
+ return err;
+ }
/* enable the device ref clock for HS mode*/
if (ufshcd_is_hs_mode(&hba->pwr_info))
ufs_qcom_dev_ref_clk_ctrl(host, true);
@@ -1110,7 +1144,7 @@ static void ufs_qcom_exit(struct ufs_hba *hba)
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
ufs_qcom_disable_lane_clks(host);
- phy_power_off(host->generic_phy);
+ ufs_qcom_phy_power_off(hba);
phy_exit(host->generic_phy);
}
@@ -1536,9 +1570,7 @@ static void ufs_qcom_config_scaling_param(struct ufs_hba *hba,
static void ufs_qcom_reinit_notify(struct ufs_hba *hba)
{
- struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-
- phy_power_off(host->generic_phy);
+ ufs_qcom_phy_power_off(hba);
}
/* Resources */
diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
index 9dd9a391ebb7..241dba01672e 100644
--- a/drivers/ufs/host/ufs-qcom.h
+++ b/drivers/ufs/host/ufs-qcom.h
@@ -215,6 +215,10 @@ struct ufs_qcom_host {
u32 phy_gear;
bool esi_enabled;
+ /* flag to check if phy is powered on */
+ bool is_phy_pwr_on;
+ /* Protect the usage of is_phy_pwr_on against racing */
+ struct mutex phy_mutex;
};
static inline u32
--
2.43.0
Powered by blists - more mailing lists