lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240112153348.2778-1-quic_nitirawa@quicinc.com>
Date: Fri, 12 Jan 2024 21:03:46 +0530
From: Nitin Rawat <quic_nitirawa@...cinc.com>
To: Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Vinod Koul <vkoul@...nel.org>,
        Kishon Vijay Abraham I <kishon@...nel.org>,
        Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
        "James E.J. Bottomley" <jejb@...ux.ibm.com>,
        "Martin K. Petersen" <martin.petersen@...cle.com>,
        Philipp Zabel <p.zabel@...gutronix.de>
Cc: linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-scsi@...r.kernel.org,
        Nitin Rawat <quic_nitirawa@...cinc.com>
Subject: [PATCH V1 0/2] Refactor phy powerup sequence

Refactor phy_power_on and phy_calibrate callbacks.

In Current code regulators enable, clks enable, calibrating UFS PHY,
start_serdes and polling PCS_ready_status are part of phy_power_on.

UFS PHY registers are retained after power collapse, meaning calibrating
UFS PHY, start_serdes and polling PCS_ready_status can be done only when
hba is powered_on, and not needed every time when phy_power_on is called
during resume. Hence keep the code which enables PHY's regulators & clks
in phy_power_on and move the rest steps into phy_calibrate function.

Since phy_power_on is separated out from phy calibrate, make separate calls
to phy_power_on and phy_calibrate calls from ufs qcom driver.

Also for better power saving, remove the phy_power_on/off calls from
resume/suspend path and put them to ufs_qcom_setup_clocks, so that
PHY's regulators & clks can be turned on/off along with UFS's clocks.

This patch series is tested on SM8550 MTP, SM8350 MTP and SA8775p.

There is functional dependency between ufs-qcom and phy-qcom-qmp-ufs
and hence both the patches should be part of same merge window.

Nitin Rawat (2):
  scsi: ufs: qcom : Refactor phy_power_on/off calls
  phy: qcom: Refactor phy_power_on and phy_calibrate callbacks

 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 183 +++++++++---------------
 drivers/ufs/host/ufs-qcom.c             | 104 +++++++++-----
 drivers/ufs/host/ufs-qcom.h             |   4 +
 3 files changed, 139 insertions(+), 152 deletions(-)

--
2.43.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ