linux-kernel - Re: [PATCH v2 1/3] platform/chrome: Update binary interface for EC-based watchdog

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <75bddec1-bb4a-467f-b37a-4b5e2892db34@roeck-us.net>
Date: Thu, 18 Jan 2024 15:42:16 -0800
From: Guenter Roeck <linux@...ck-us.net>
To: Lukasz Majczak <lma@...omium.org>
Cc: Gwendal Grignou <gwendal@...omium.org>,
	Tzung-Bi Shih <tzungbi@...nel.org>,
	Radoslaw Biernacki <biernacki@...gle.com>,
	Wim Van Sebroeck <wim@...ux-watchdog.org>,
	Lee Jones <lee@...nel.org>, Benson Leung <bleung@...omium.org>,
	Guenter Roeck <groeck@...omium.org>,
	Krzysztof Kozlowski <krzk@...nel.org>,
	linux-watchdog@...r.kernel.org, linux-kernel@...r.kernel.org,
	chrome-platform@...ts.linux.dev
Subject: Re: [PATCH v2 1/3] platform/chrome: Update binary interface for
 EC-based watchdog

On Thu, Jan 18, 2024 at 07:53:22PM +0000, Lukasz Majczak wrote:
> Update structures and defines related to EC_CMD_HANG_DETECT
> to allow usage of new EC-based watchdog.
> 
> Signed-off-by: Lukasz Majczak <lma@...omium.org>

Reviewed-by: Guenter Roeck <linux@...ck-us.net>

> ---
>  .../linux/platform_data/cros_ec_commands.h    | 78 +++++++++----------
>  1 file changed, 35 insertions(+), 43 deletions(-)
> 
> diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h
> index 7dae17b62a4d..ecc47d5fe239 100644
> --- a/include/linux/platform_data/cros_ec_commands.h
> +++ b/include/linux/platform_data/cros_ec_commands.h
> @@ -3961,60 +3961,52 @@ struct ec_response_i2c_passthru {
>  } __ec_align1;
>  
>  /*****************************************************************************/
> -/* Power button hang detect */
> -
> +/* AP hang detect */
>  #define EC_CMD_HANG_DETECT 0x009F
>  
> -/* Reasons to start hang detection timer */
> -/* Power button pressed */
> -#define EC_HANG_START_ON_POWER_PRESS  BIT(0)
> -
> -/* Lid closed */
> -#define EC_HANG_START_ON_LID_CLOSE    BIT(1)
> -
> - /* Lid opened */
> -#define EC_HANG_START_ON_LID_OPEN     BIT(2)
> -
> -/* Start of AP S3->S0 transition (booting or resuming from suspend) */
> -#define EC_HANG_START_ON_RESUME       BIT(3)
> -
> -/* Reasons to cancel hang detection */
> +#define EC_HANG_DETECT_MIN_TIMEOUT 5
> +#define EC_HANG_DETECT_MAX_TIMEOUT 65535
>  
> -/* Power button released */
> -#define EC_HANG_STOP_ON_POWER_RELEASE BIT(8)
> +/* EC hang detect commands */
> +enum ec_hang_detect_cmds {
> +	/* Reload AP hang detect timer. */
> +	EC_HANG_DETECT_CMD_RELOAD = 0x0,
>  
> -/* Any host command from AP received */
> -#define EC_HANG_STOP_ON_HOST_COMMAND  BIT(9)
> +	/* Stop AP hang detect timer. */
> +	EC_HANG_DETECT_CMD_CANCEL = 0x1,
>  
> -/* Stop on end of AP S0->S3 transition (suspending or shutting down) */
> -#define EC_HANG_STOP_ON_SUSPEND       BIT(10)
> +	/* Configure watchdog with given reboot timeout and
> +	 * cancel currently running AP hang detect timer.
> +	 */
> +	EC_HANG_DETECT_CMD_SET_TIMEOUT = 0x2,
>  
> -/*
> - * If this flag is set, all the other fields are ignored, and the hang detect
> - * timer is started.  This provides the AP a way to start the hang timer
> - * without reconfiguring any of the other hang detect settings.  Note that
> - * you must previously have configured the timeouts.
> - */
> -#define EC_HANG_START_NOW             BIT(30)
> +	/* Get last hang status - whether the AP boot was clear or not */
> +	EC_HANG_DETECT_CMD_GET_STATUS = 0x3,
>  
> -/*
> - * If this flag is set, all the other fields are ignored (including
> - * EC_HANG_START_NOW).  This provides the AP a way to stop the hang timer
> - * without reconfiguring any of the other hang detect settings.
> - */
> -#define EC_HANG_STOP_NOW              BIT(31)
> +	/* Clear last hang status. Called when AP is rebooting/shutting down
> +	 * gracefully.
> +	 */
> +	EC_HANG_DETECT_CMD_CLEAR_STATUS = 0x4
> +};
>  
>  struct ec_params_hang_detect {
> -	/* Flags; see EC_HANG_* */
> -	uint32_t flags;
> -
> -	/* Timeout in msec before generating host event, if enabled */
> -	uint16_t host_event_timeout_msec;
> +	uint16_t command; /* enum ec_hang_detect_cmds */
> +	/* Timeout in seconds before generating reboot */
> +	uint16_t reboot_timeout_sec;
> +} __ec_align2;
>  
> -	/* Timeout in msec before generating warm reboot, if enabled */
> -	uint16_t warm_reboot_timeout_msec;
> -} __ec_align4;
> +/* Status codes that describe whether AP has boot normally or the hang has been
> + * detected and EC has reset AP
> + */
> +enum ec_hang_detect_status {
> +	EC_HANG_DETECT_AP_BOOT_NORMAL = 0x0,
> +	EC_HANG_DETECT_AP_BOOT_EC_WDT = 0x1,
> +	EC_HANG_DETECT_AP_BOOT_COUNT,
> +};
>  
> +struct ec_response_hang_detect {
> +	uint8_t status; /* enum ec_hang_detect_status */
> +} __ec_align1;
>  /*****************************************************************************/
>  /* Commands for battery charging */
>  
> -- 
> 2.43.0.429.g432eaa2c6b-goog
> 
>