| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 18 Jan 2024 11:04:31 +0100
From: Arnaud Pouliquen <arnaud.pouliquen@...s.st.com>
To: Bjorn Andersson <andersson@...nel.org>,
Mathieu Poirier
<mathieu.poirier@...aro.org>,
Jens Wiklander <jens.wiklander@...aro.org>,
Rob
Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski
<krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
CC: <linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-remoteproc@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<op-tee@...ts.trustedfirmware.org>, <devicetree@...r.kernel.org>,
Arnaud Pouliquen <arnaud.pouliquen@...s.st.com>
Subject: [PATCH v2 2/4] dt-bindings: remoteproc: Add compatibility for TEE support
The "st,stm32mp1-m4-tee" compatible is utilized in a system configuration
where the Cortex-M4 firmware is loaded by the Trusted execution Environment
(TEE).
For instance, this compatible is used in both the Linux and OP-TEE
device-tree:
- In OP-TEE, a node is defined in the device tree with the
st,stm32mp1-m4-tee to support signed remoteproc firmware.
Based on DT properties, OP-TEE authenticates, loads, starts, and stops
the firmware.
- On Linux, when the compatibility is set, the Cortex-M resets should not
be declared in the device tree.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@...s.st.com>
---
V1 to V2 updates
- update "st,stm32mp1-m4" compatible description to generalize
- remove the 'reset-names' requirement in one conditional branch, as the
property is already part of the condition test.
---
.../bindings/remoteproc/st,stm32-rproc.yaml | 52 +++++++++++++++----
1 file changed, 43 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
index 370af61d8f28..6af821b15736 100644
--- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
@@ -16,7 +16,12 @@ maintainers:
properties:
compatible:
- const: st,stm32mp1-m4
+ enum:
+ - st,stm32mp1-m4
+ - st,stm32mp1-m4-tee
+ description:
+ Use "st,stm32mp1-m4" for the Cortex-M4 coprocessor management by non-secure context
+ Use "st,stm32mp1-m4-tee" for the Cortex-M4 coprocessor management by secure context
reg:
description:
@@ -142,21 +147,40 @@ properties:
required:
- compatible
- reg
- - resets
allOf:
- if:
properties:
- reset-names:
- not:
- contains:
- const: hold_boot
+ compatible:
+ contains:
+ const: st,stm32mp1-m4
+ then:
+ if:
+ properties:
+ reset-names:
+ not:
+ contains:
+ const: hold_boot
+ then:
+ required:
+ - st,syscfg-holdboot
+ - resets
+ else:
+ properties:
+ st,syscfg-holdboot: false
+ required:
+ - resets
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: st,stm32mp1-m4-tee
then:
- required:
- - st,syscfg-holdboot
- else:
properties:
st,syscfg-holdboot: false
+ reset-names: false
+ resets: false
additionalProperties: false
@@ -188,5 +212,15 @@ examples:
st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
};
+ - |
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ m4@...00000 {
+ compatible = "st,stm32mp1-m4-tee";
+ reg = <0x10000000 0x40000>,
+ <0x30000000 0x40000>,
+ <0x38000000 0x10000>;
+ st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
+ st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
+ };
...
--
2.25.1
Powered by blists - more mailing lists