| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f8c2f1c8-0b43-47c6-9359-9aeeb14863eb@csgroup.eu>
Date: Fri, 19 Jan 2024 13:53:12 +0000
From: Christophe Leroy <christophe.leroy@...roup.eu>
To: Matthias Schiffer <matthias.schiffer@...tq-group.com>
CC: Nicholas Piggin <npiggin@...il.com>, Aneesh Kumar K.V
<aneesh.kumar@...nel.org>, "Naveen N. Rao" <naveen.n.rao@...ux.ibm.com>,
"linuxppc-dev@...ts.ozlabs.org" <linuxppc-dev@...ts.ozlabs.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux@...tq-group.com" <linux@...tq-group.com>, Michael Ellerman
<mpe@...erman.id.au>
Subject: Re: [PATCH] powerpc/6xx: set High BAT Enable flag on G2 cores
Le 19/01/2024 à 14:41, Matthias Schiffer a écrit :
>>
>> Thinking about it once more, can we do even more simple ?
>>
>> Why do we need that __setup_cpu_g2() at all ?
>>
>> You could just add the following into __set_cpu_603()
>>
>> diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S
>> b/arch/powerpc/kernel/cpu_setup_6xx.S
>> index c67d32e04df9..7b41e3884866 100644
>> --- a/arch/powerpc/kernel/cpu_setup_6xx.S
>> +++ b/arch/powerpc/kernel/cpu_setup_6xx.S
>> @@ -21,6 +21,11 @@ BEGIN_MMU_FTR_SECTION
>> li r10,0
>> mtspr SPRN_SPRG_603_LRU,r10 /* init SW LRU tracking */
>> END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
>> +BEGIN_MMU_FTR_SECTION
>> + mfspr r11,SPRN_HID2_G2
>> + oris r11,r11,HID2_HBE_G2@h
>> + mtspr SPRN_HID2_G2,r11
>> +END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
>>
>> BEGIN_FTR_SECTION
>> bl __init_fpu_registers
>> ---
>>
>> By the way, as your register is named SPRN_HID2_G2, the bit would better
>> be named HID2_G2_HBE instead of HID2_HBE_G2 I think.
>
> My intention was to keep this consistent with the SPRN_HID2_GEKKO define.
I don't understand what you mean. I can't see any bits defined for
HID2_GEKKO.
What I see which is simitar is the definition of TSC register for CELL CPU.
#define SPRN_TSC_CELL 0x399 /* Thread switch control on Cell */
#define TSC_CELL_DEC_ENABLE_0 0x400000 /* Decrementer Interrupt */
#define TSC_CELL_DEC_ENABLE_1 0x200000 /* Decrementer Interrupt */
#define TSC_CELL_EE_ENABLE 0x100000 /* External Interrupt */
#define TSC_CELL_EE_BOOST 0x080000 /* External Interrupt Boost */
They don't call it TSC_EE_BOOST_CELL or TSC_EE_ENABLE_CELL
Christophe
>
> Regards,
> Matthias
>
>
>
>
>>
>> Christophe
>>
>>>
>>>>
>>>>> +
>>>>> +BEGIN_FTR_SECTION
>>>>> + bl __init_fpu_registers
>>>>> +END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE)
>>>>> + bl setup_common_caches
>>>>> + bl setup_g2_hid2
>>>>> + mtlr r5
>>>>> + blr
>>>>>
>>>>> /* Enable caches for 603's, 604, 750 & 7400 */
>>>>> SYM_FUNC_START_LOCAL(setup_common_caches)
>>>>> @@ -115,6 +129,16 @@ SYM_FUNC_START_LOCAL(setup_604_hid0)
>>>>> blr
>>>>> SYM_FUNC_END(setup_604_hid0)
>>>>>
>>>>> +/* Enable high BATs for G2 (G2_LE, e300cX) */
>>>>> +SYM_FUNC_START_LOCAL(setup_g2_hid2)
>>>>> + mfspr r11,SPRN_HID2_G2
>>>>> + oris r11,r11,HID2_HBE_G2@h
>>>>> + mtspr SPRN_HID2_G2,r11
>>>>> + sync
>>>>> + isync
>>>>> + blr
>>>>> +SYM_FUNC_END(setup_g2_hid2)
>>>>> +
>>>>> /* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some
>>>>> * erratas we work around here.
>>>>> * Moto MPC710CE.pdf describes them, those are errata
>>>>> @@ -495,4 +519,3 @@ _GLOBAL(__restore_cpu_setup)
>>>>> mtcr r7
>>>>> blr
>>>>> _ASM_NOKPROBE_SYMBOL(__restore_cpu_setup)
>>>>> -
>>>>> diff --git a/arch/powerpc/kernel/cpu_specs_book3s_32.h b/arch/powerpc/kernel/cpu_specs_book3s_32.h
>>>>> index 3714634d194a1..83f054fcf837c 100644
>>>>> --- a/arch/powerpc/kernel/cpu_specs_book3s_32.h
>>>>> +++ b/arch/powerpc/kernel/cpu_specs_book3s_32.h
>>>>> @@ -69,7 +69,7 @@ static struct cpu_spec cpu_specs[] __initdata = {
>>>>> .mmu_features = MMU_FTR_USE_HIGH_BATS,
>>>>> .icache_bsize = 32,
>>>>> .dcache_bsize = 32,
>>>>> - .cpu_setup = __setup_cpu_603,
>>>>> + .cpu_setup = __setup_cpu_g2,
>>>>> .machine_check = machine_check_generic,
>>>>> .platform = "ppc603",
>>>>> },
>>>>> @@ -83,7 +83,7 @@ static struct cpu_spec cpu_specs[] __initdata = {
>>>>> .mmu_features = MMU_FTR_USE_HIGH_BATS,
>>>>> .icache_bsize = 32,
>>>>> .dcache_bsize = 32,
>>>>> - .cpu_setup = __setup_cpu_603,
>>>>> + .cpu_setup = __setup_cpu_g2,
>>>>> .machine_check = machine_check_83xx,
>>>>> .platform = "ppc603",
>>>>> },
>>>>> @@ -96,7 +96,7 @@ static struct cpu_spec cpu_specs[] __initdata = {
>>>>> .mmu_features = MMU_FTR_USE_HIGH_BATS | MMU_FTR_NEED_DTLB_SW_LRU,
>>>>> .icache_bsize = 32,
>>>>> .dcache_bsize = 32,
>>>>> - .cpu_setup = __setup_cpu_603,
>>>>> + .cpu_setup = __setup_cpu_g2,
>>>>> .machine_check = machine_check_83xx,
>>>>> .platform = "ppc603",
>>>>> },
>>>>> @@ -109,7 +109,7 @@ static struct cpu_spec cpu_specs[] __initdata = {
>>>>> .mmu_features = MMU_FTR_USE_HIGH_BATS | MMU_FTR_NEED_DTLB_SW_LRU,
>>>>> .icache_bsize = 32,
>>>>> .dcache_bsize = 32,
>>>>> - .cpu_setup = __setup_cpu_603,
>>>>> + .cpu_setup = __setup_cpu_g2,
>>>>> .machine_check = machine_check_83xx,
>>>>> .num_pmcs = 4,
>>>>> .platform = "ppc603",
>>>>> @@ -123,7 +123,7 @@ static struct cpu_spec cpu_specs[] __initdata = {
>>>>> .mmu_features = MMU_FTR_USE_HIGH_BATS | MMU_FTR_NEED_DTLB_SW_LRU,
>>>>> .icache_bsize = 32,
>>>>> .dcache_bsize = 32,
>>>>> - .cpu_setup = __setup_cpu_603,
>>>>> + .cpu_setup = __setup_cpu_g2,
>>>>> .machine_check = machine_check_83xx,
>>>>> .num_pmcs = 4,
>>>>> .platform = "ppc603",
>>>>> --
>>>>> TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
>>>>> Amtsgericht München, HRB 105018
>>>>> Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
>>>>> https://www.tq-group.com/
>>>
>>> --
>>> TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
>>> Amtsgericht München, HRB 105018
>>> Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
>>> https://www.tq-group.com/
>
> --
> TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
> Amtsgericht München, HRB 105018
> Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
> https://www.tq-group.com/
Powered by blists - more mailing lists