[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <6d51e06a8586997b31eecead55a369f01c5696a7.1705932585.git.geert+renesas@glider.be>
Date: Mon, 22 Jan 2024 15:24:32 +0100
From: Geert Uytterhoeven <geert+renesas@...der.be>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Magnus Damm <magnus.damm@...il.com>
Cc: linux-staging@...ts.linux.dev,
linux-usb@...r.kernel.org,
linux-renesas-soc@...r.kernel.org,
linux-kernel@...r.kernel.org,
Geert Uytterhoeven <geert+renesas@...der.be>
Subject: [PATCH v2 3/4] staging: board: Remove Armadillo-800-EVA board staging code
Since commits 1399ebacbf590dfb ("drm: renesas: shmobile: Add DT
support"), 138588e9fa237f97 ("ARM: dts: renesas: r8a7740: Add LCDC
nodes"), and c9a0ed13382660c9 ("ARM: dts: renesas: armadillo800eva: Add
LCD panel"), there is no longer any use for the Atmark Techno
Armadillo-800-EVA board staging code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
---
v2:
- New.
---
drivers/staging/board/Makefile | 1 -
drivers/staging/board/armadillo800eva.c | 88 -------------------------
2 files changed, 89 deletions(-)
delete mode 100644 drivers/staging/board/armadillo800eva.c
diff --git a/drivers/staging/board/Makefile b/drivers/staging/board/Makefile
index 5db091b5ca01596a..b6a00c93c2cc10dd 100644
--- a/drivers/staging/board/Makefile
+++ b/drivers/staging/board/Makefile
@@ -1,3 +1,2 @@
# SPDX-License-Identifier: GPL-2.0
obj-y := board.o
-obj-$(CONFIG_ARCH_R8A7740) += armadillo800eva.o
diff --git a/drivers/staging/board/armadillo800eva.c b/drivers/staging/board/armadillo800eva.c
deleted file mode 100644
index 0225234dd7aa6b1c..0000000000000000
--- a/drivers/staging/board/armadillo800eva.c
+++ /dev/null
@@ -1,88 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Staging board support for Armadillo 800 eva.
- * Enable not-yet-DT-capable devices here.
- *
- * Based on board-armadillo800eva.c
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@...esas.com>
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/fb.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/videodev2.h>
-
-#include <video/sh_mobile_lcdc.h>
-
-#include "board.h"
-
-static struct fb_videomode lcdc0_mode = {
- .name = "AMPIER/AM-800480",
- .xres = 800,
- .yres = 480,
- .left_margin = 88,
- .right_margin = 40,
- .hsync_len = 128,
- .upper_margin = 20,
- .lower_margin = 5,
- .vsync_len = 5,
- .sync = 0,
-};
-
-static struct sh_mobile_lcdc_info lcdc0_info = {
- .clock_source = LCDC_CLK_BUS,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .interface_type = RGB24,
- .clock_divider = 5,
- .flags = 0,
- .lcd_modes = &lcdc0_mode,
- .num_modes = 1,
- .panel_cfg = {
- .width = 111,
- .height = 68,
- },
- },
-};
-
-static struct resource lcdc0_resources[] = {
- DEFINE_RES_MEM_NAMED(0xfe940000, 0x4000, "LCD0"),
- DEFINE_RES_IRQ(177 + 32),
-};
-
-static struct platform_device lcdc0_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(lcdc0_resources),
- .resource = lcdc0_resources,
- .id = 0,
- .dev = {
- .platform_data = &lcdc0_info,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static const struct board_staging_clk lcdc0_clocks[] __initconst = {
- { "lcdc0", NULL, "sh_mobile_lcdc_fb.0" },
-};
-
-static const struct board_staging_dev armadillo800eva_devices[] __initconst = {
- {
- .pdev = &lcdc0_device,
- .clocks = lcdc0_clocks,
- .nclocks = ARRAY_SIZE(lcdc0_clocks),
- .domain = "/system-controller@...80000/pm-domains/c5/a4lc@1"
- },
-};
-
-static void __init armadillo800eva_init(void)
-{
- board_staging_gic_setup_xlate("arm,pl390", 32);
- board_staging_register_devices(armadillo800eva_devices,
- ARRAY_SIZE(armadillo800eva_devices));
-}
-
-board_staging("renesas,armadillo800eva", armadillo800eva_init);
--
2.34.1
Powered by blists - more mailing lists