| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240126035855.1785-4-shenghao-ding@ti.com>
Date: Fri, 26 Jan 2024 11:58:54 +0800
From: Shenghao Ding <shenghao-ding@...com>
To: <broonie@...nel.org>, <conor+dt@...nel.org>,
<krzysztof.kozlowski@...aro.org>
CC: <robh+dt@...nel.org>, <andriy.shevchenko@...ux.intel.com>,
<kevin-lu@...com>, <baojun.xu@...com>, <devicetree@...r.kernel.org>,
<v-po@...com>, <lgirdwood@...il.com>, <perex@...ex.cz>,
<pierre-louis.bossart@...ux.intel.com>, <13916275206@....com>,
<mohit.chawla@...com>, <linux-sound@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <liam.r.girdwood@...el.com>,
<soyer@....hu>, <jkhuang3@...com>, <tiwai@...e.de>, <pdjuandi@...com>,
<j-mcpherson@...com>, <navada@...com>,
Shenghao Ding <shenghao-ding@...com>
Subject: [PATCH v2 4/4] ASoc: dt-bindings: PCM6240: Add initial DT binding
PCM6240 driver implements a flexible and configurable setting for register
and filter coefficients, to one, two or even multiple PCM6240 Family Audio
chips.
Signed-off-by: Shenghao Ding <shenghao-ding@...com>
---
Change in v2:
- Rewrite the subject to match something similar to other commits.
- And something to be compatible with.
- minItems, then maxItems.
- Drop reset-gpios description
- Remove the repeated reg descriptions and reg constraints.
- Drop redundant spaces.
- Add missing line breaks between blocks and additionalProperties.
- All these chips have only a portion of the functionality of codec,
such as ADC or DAC, and so on, but their audio performance is far
superior to the codec's, and cost is lower than codec, and much easier
to program than codec. Simply one or two register settings can enable
them to work. Init for these chips are hardware reset or software reset.
As to some audio filter params for internal filters, it is up to the
special user cases, which can be saved into the bin file. The default
value also can work well.
---
.../devicetree/bindings/sound/ti,pcm6240.yaml | 276 ++++++++++++++++++
1 file changed, 276 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/ti,pcm6240.yaml
diff --git a/Documentation/devicetree/bindings/sound/ti,pcm6240.yaml b/Documentation/devicetree/bindings/sound/ti,pcm6240.yaml
new file mode 100644
index 000000000000..f06264d81b46
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,pcm6240.yaml
@@ -0,0 +1,276 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 - 2024 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,pcm6240.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments PCM6240 Family Audio ADC/DAC
+
+maintainers:
+ - Shenghao Ding <shenghao-ding@...com>
+
+description: |
+ The PCM6240 Family is a big family of Audio ADC/DAC for
+ different Specifications, range from Personal Electric
+ to Automotive Electric, even some professional fields.
+
+ Specifications about the audio chip can be found at:
+ https://www.ti.com/lit/gpn/tlv320adc3120
+ https://www.ti.com/lit/gpn/tlv320adc5120
+ https://www.ti.com/lit/gpn/tlv320adc6120
+ https://www.ti.com/lit/gpn/dix4192
+ https://www.ti.com/lit/gpn/pcm1690
+ https://www.ti.com/lit/gpn/pcm3120-q1
+ https://www.ti.com/lit/gpn/pcm3140-q1
+ https://www.ti.com/lit/gpn/pcm5120-q1
+ https://www.ti.com/lit/gpn/pcm6120-q1
+ https://www.ti.com/lit/gpn/pcm6260-q1
+ https://www.ti.com/lit/gpn/pcm9211
+ https://www.ti.com/lit/gpn/pcmd3140
+ https://www.ti.com/lit/gpn/pcmd3180
+ https://www.ti.com/lit/gpn/taa5212
+ https://www.ti.com/lit/gpn/tad5212
+
+properties:
+ compatible:
+ description: |
+ ti,adc3120: Stereo-channel, 768-kHz, Burr-Brown™ audio analog-to-
+ digital converter (ADC) with 106-dB SNR.
+
+ ti,adc5120: 2-Channel, 768-kHz, Burr-BrownTM Audio ADC with 120-dB SNR.
+
+ ti,adc6120: Stereo-channel, 768-kHz, Burr-Brown™ audio analog-to-
+ digital converter (ADC) with 123-dB SNR.
+
+ ti,pcm1690: 113dB SNR, 24-Bit, 192-kHz Sampling, Enhanced Multi-Level
+ ?S, Eight-Channel Audio Digital-to-Analog Converter with Differential
+ Outputs.
+
+ ti,pcm3120: Automotive, stereo, 106-dB SNR, 768-kHz, low-power
+ software-controlled audio ADC.
+
+ ti,pcm3140: Automotive, Quad-Channel, 768-kHz, Burr-BrownTM Audio ADC
+ with 106-dB SNR.
+
+ ti,pcm5120: Automotive, stereo, 120-dB SNR, 768-kHz, low-power
+ software-controlled audio ADC.
+
+ ti,pcm5140: Automotive, Quad-Channel, 768-kHz, Burr-BrownTM Audio ADC
+ with 120-dB SNR.
+
+ ti,pcm6120: Automotive, stereo, 123-dB SNR, 768-kHz, low-power
+ software-controlled audio ADC.
+
+ ti,pcm6140: Automotive, Quad-Channel, 768-kHz, Burr-BrownTM Audio ADC
+ with 123-dB SNR.
+
+ ti,pcm6240: Automotive 4-ch audio ADC with integrated programmable mic
+ bias, boost and input diagnostics.
+
+ ti,pcm6260: Automotive 6-ch audio ADC with integrated programmable mic
+ bias, boost and input diagnostics.
+
+ ti,pcm9211: 216-kHz Digital Audio Interface Transceiver (DIX)
+ With Stereo ADC and Routing.
+
+ ti,pcmd3140: Four-channel PDM-input to TDM or I�S output converter.
+
+ ti,pcmd3180: Eight-channel pulse-density-modulation input to TDM or
+ I�S output converter.
+
+ ti,taa5212: Low-power high-performance stereo audio ADC with 118-dB
+ dynamic range.
+
+ ti,tad5212: Low-power stereo audio DAC with 120-dB dynamic range.
+ oneOf:
+ - items:
+ - enum:
+ - ti,adc3120
+ - ti,adc5120
+ - ti,pcm3120
+ - ti,pcm5120
+ - ti,pcm6120
+ - const: ti,adc6120
+ - items:
+ - enum:
+ - ti,pcm6260
+ - ti,pcm6140
+ - ti,pcm3140
+ - ti,pcm5140
+ - const: ti,pcm6240
+ - items:
+ - const: ti,dix4192
+ - const: ti,pcm6240
+ - const: ti,adc6120
+ - items:
+ - const: ti,pcm1690
+ - const: ti,pcm9211
+ - const: ti,pcmd512x
+ - items:
+ - enum:
+ - ti,pcmd3180
+ - const: ti,pcmd3140
+ - items:
+ - enum:
+ - taa5412
+ - const: ti,taa5212
+ - items:
+ - enum:
+ - tad5412
+ - const: ti,tad5212
+ - items:
+ - enum:
+ - ti,pcm6240
+ - ti,pcmd3140
+ - ti,taa5212
+ - ti,tad5212
+ - ti,pcmd3180
+ reg:
+ description:
+ I2C address, in multiple pcmdevices case, all the i2c address
+ aggregate as one Audio Device to support multiple audio slots.
+ minItems: 1
+ maxItems: 4
+
+ reset-gpios:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+ description:
+ Invalid only for ti,pcm1690 because of no INT pin.
+
+ '#sound-dai-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: dai-common.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,pcm1690
+ then:
+ properties:
+ reg:
+ items:
+ minimum: 0x4c
+ maximum: 0x4f
+ interrupts: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,adc3120
+ - ti,adc5120
+ - ti,adc6120
+ - ti,pcm3120
+ - ti,pcm5120
+ - ti,pcm6120
+ - ti,pcmd3140
+ then:
+ properties:
+ reg:
+ maxItems: 1
+ items:
+ maximum: 0x4e
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,dix4192
+ then:
+ properties:
+ reg:
+ items:
+ minimum: 0x70
+ maximum: 0x73
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,pcm6240
+ - ti,pcm6260
+ then:
+ properties:
+ reg:
+ minItems: 1
+ maxItems: 4
+ items:
+ minimum: 0x48
+ maximum: 0x4b
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,pcm9211
+ then:
+ properties:
+ reg:
+ items:
+ minimum: 0x40
+ maximum: 0x43
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,taa5212
+ - ti,taa5412
+ - ti,tad5212
+ - ti,tad5412
+ then:
+ properties:
+ reg:
+ items:
+ minimum: 0x50
+ maximum: 0x53
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ /* example for two devices with interrupt support */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pcm6240: audio-codec@48 {
+ compatible = "ti,pcm6240";
+ reg = <0x48>, /* primary-device */
+ <0x4b>; /* secondary-device */
+ #sound-dai-cells = <0>;
+ reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15>;
+ };
+ };
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ /* example for one device without interrupt support*/
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pcmd3180: audio-codec@4c {
+ compatible = "ti,pcmd3180";
+ reg = <0x4c>;
+ #sound-dai-cells = <0>;
+ reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ };
+ };
+...
--
2.34.1
Powered by blists - more mailing lists