[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240128-vagabond-mutilator-cf8dc6ac8a41@spud>
Date: Sun, 28 Jan 2024 17:38:52 +0000
From: Conor Dooley <conor@...nel.org>
To: Farouk Bouabid <farouk.bouabid@...obroma-systems.com>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Heiko Stuebner <heiko@...ech.de>, Rob Herring <robh@...nel.org>,
linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org,
quentin.schulz@...obroma-systems.com
Subject: Re: [PATCH v4 3/6] dt-bindings: serial: add binding for rs485
rx-enable state when rs485 is disabled
On Fri, Jan 26, 2024 at 03:55:12PM +0100, Farouk Bouabid wrote:
> RS485 can have a receiver-enable gpio (rx-enable-gpios). When rs485 is
> enabled, this gpio, if provided, must be driven active while receiving.
> However when RS485 is disabled this gpio should not have an undefined
> state. In that case, as DE and RE pins can be connected both to this gpio,
> if its state is not properly defined, can cause unexpected transceiver
> behavior.
> This binding depend on rx-enable-gpios to be implemented.
Why do you need a dedicated property for this when there exists a device
specific compatible for the uart on both of the affected rockchip
systems?
Thanks,
Conor.
>
> Signed-off-by: Farouk Bouabid <farouk.bouabid@...obroma-systems.com>
> ---
> Documentation/devicetree/bindings/serial/rs485.yaml | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
> index b64577036b5c..4c79dfaaf460 100644
> --- a/Documentation/devicetree/bindings/serial/rs485.yaml
> +++ b/Documentation/devicetree/bindings/serial/rs485.yaml
> @@ -55,6 +55,11 @@ properties:
> description: GPIO to handle a separate RS485 receive enable signal
> maxItems: 1
>
> + rs485-rx-enable-inactive-when-rs485-disabled:
> + description: rx-enable GPIO is not active when RS485 is disabled. If missing, active-state
> + is assumed.
> + $ref: /schemas/types.yaml#/definitions/flag
> +
> rs485-term-gpios:
> description: GPIO pin to enable RS485 bus termination.
> maxItems: 1
>
> --
> 2.34.1
>
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists