[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20240130151428.GA1629184-robh@kernel.org>
Date: Tue, 30 Jan 2024 09:14:28 -0600
From: Rob Herring <robh@...nel.org>
To: Dario Binacchi <dario.binacchi@...rulasolutions.com>
Cc: linux-kernel@...r.kernel.org,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Conor Dooley <conor+dt@...nel.org>, Daniel Vetter <daniel@...ll.ch>,
David Airlie <airlied@...il.com>,
Jessica Zhang <quic_jesszhan@...cinc.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Linus Walleij <linus.walleij@...aro.org>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Neil Armstrong <neil.armstrong@...aro.org>,
Sam Ravnborg <sam@...nborg.org>,
Thomas Zimmermann <tzimmermann@...e.de>, devicetree@...r.kernel.org,
dri-devel@...ts.freedesktop.org
Subject: Re: [drm-drm-misc:drm-misc-next] dt-bindings: nt35510: document
'port' property
On Sat, Jan 27, 2024 at 04:28:08PM +0100, Dario Binacchi wrote:
> Allow 'port' property (coming from panel-common.yaml) to be used in DTS:
>
> st/stm32f769-disco-mb1166-reva09.dtb: panel@0: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
>
> Signed-off-by: Dario Binacchi <dario.binacchi@...rulasolutions.com>
> Cc: Alexandre Torgue <alexandre.torgue@...s.st.com>
>
> ---
>
> .../display/panel/novatek,nt35510.yaml | 34 +++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
> index a4afaff483b7..72913719df23 100644
> --- a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
> @@ -31,6 +31,22 @@ properties:
> vddi-supply:
> description: regulator that supplies the vddi voltage
> backlight: true
> + port:
> + $ref: /schemas/graph.yaml#/properties/port
Just 'port: true'
> +
> +if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - frida,frd400b25025
> +then:
> + required:
> + - port
> +
> +else:
> + properties:
> + port: false
No need for this. 'port' should be allowed for everyone.
>
> required:
> - compatible
> @@ -54,5 +70,23 @@ examples:
> backlight = <&gpio_bl>;
> };
> };
> + - |
> + dsi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + panel@0 {
> + compatible = "frida,frd400b25025", "novatek,nt35510";
> + vddi-supply = <&vcc_3v3>;
> + vdd-supply = <&vcc_3v3>;
> + reg = <0>; /* dsi virtual channel (0..3) */
> + reset-gpios = <&gpioj 15 GPIO_ACTIVE_LOW>;
>
> + port {
> + dsi_panel_in: endpoint {
> + remote-endpoint = <&dsi_out>;
> + };
> + };
> + };
> + };
> ...
> --
> 2.43.0
>
Powered by blists - more mailing lists