linux-kernel - Re: [PATCH] dt-bindings: mfd: syscon: Add ti,k3-pcie-ctrl compatible

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <2824fd42-d588-4a0b-b6f9-1e9cb6055d6a@linaro.org>
Date: Thu, 1 Feb 2024 08:31:58 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Siddharth Vadapalli <s-vadapalli@...com>, Andrew Davis <afd@...com>
Cc: lee@...nel.org, robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
 conor+dt@...nel.org, devicetree@...r.kernel.org,
 linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
 srk@...com
Subject: Re: [PATCH] dt-bindings: mfd: syscon: Add ti,k3-pcie-ctrl compatible

On 01/02/2024 05:48, Siddharth Vadapalli wrote:
> Hello Andrew,
> 
> On 31/01/24 21:43, Andrew Davis wrote:
>> On 1/31/24 5:23 AM, Siddharth Vadapalli wrote:
>>> The PCIE_CTRL registers within the CTRL_MMR space of TI's K3 SoCs are
>>> used to configure the link speed, lane count and mode of operation of
>>> the respective PCIe instance. Add compatible for allowing the PCIe
>>> driver to obtain a regmap for the PCIE_CTRL register within the System
>>> Controller device-tree node in order to configure the PCIe instance
>>> accordingly.
>>>
>>> Signed-off-by: Siddharth Vadapalli <s-vadapalli@...com>
>>> ---
>>>
>>> This patch is based on linux-next tagged next-20240131.
>>>
>>>   Documentation/devicetree/bindings/mfd/syscon.yaml | 1 +
>>>   1 file changed, 1 insertion(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml
>>> b/Documentation/devicetree/bindings/mfd/syscon.yaml
>>> index 084b5c2a2a3c..da571a24e21f 100644
>>> --- a/Documentation/devicetree/bindings/mfd/syscon.yaml
>>> +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
>>> @@ -73,6 +73,7 @@ properties:
>>>                 - rockchip,rv1126-qos
>>>                 - starfive,jh7100-sysmain
>>>                 - ti,am654-dss-oldi-io-ctrl
>>> +              - ti,k3-pcie-ctrl
>>
>> This might not be the same for all K3 devices, you should use
>> the name of the first device which uses this, so:
>>
>> ti,j721e-pcie-ctrl
> 
> It is the same for all K3 devices so far. However, since the convention appears
> to be the first device that it is applicable to as you pointed out, I will post
> the v2 patch for this accordingly.

This was repeated so many times... so one more. Compatibles are specific
to SoC, not to family.

https://elixir.bootlin.com/linux/v6.1-rc1/source/Documentation/devicetree/bindings/writing-bindings.rst#L42

Best regards,
Krzysztof