Message-ID: <ce15922e-4292-41d6-8c5f-2b4fbfa83d5c@broadcom.com>
Date: Mon, 5 Feb 2024 10:05:14 -0800
From: William Zhang <william.zhang@...adcom.com>
To: Miquel Raynal <miquel.raynal@...tlin.com>, Conor Dooley <conor@...nel.org>
Cc: Linux MTD List <linux-mtd@...ts.infradead.org>,
 Linux ARM List <linux-arm-kernel@...ts.infradead.org>,
 Broadcom Kernel List <bcm-kernel-feedback-list@...adcom.com>,
 f.fainelli@...il.com, kursad.oney@...adcom.com, joel.peshkin@...adcom.com,
 anand.gore@...adcom.com, dregan@...l.com, kamal.dasu@...adcom.com,
 tomer.yacoby@...adcom.com, dan.beygelman@...adcom.com,
 devicetree@...r.kernel.org, Brian Norris <computersforpeace@...il.com>,
 linux-kernel@...r.kernel.org, Conor Dooley <conor+dt@...nel.org>,
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
 Vignesh Raghavendra <vigneshr@...com>, Richard Weinberger <richard@....at>,
 Kamal Dasu <kdasu.kdev@...il.com>, Rob Herring <robh+dt@...nel.org>
Subject: Re: [PATCH v4 03/12] dt-bindings: mtd: brcmnand: Add ecc strap
 property

Hi Miquel,

On 2/5/24 05:26, Miquel Raynal wrote:
> Hi,
> 
> conor@...nel.org wrote on Sat, 3 Feb 2024 14:49:50 +0000:
> 
>> On Fri, Feb 02, 2024 at 04:28:24PM -0800, William Zhang wrote:
>>> Add brcm,nand-ecc-use-strap to get ecc and spare area size settings from
>>> board boot strap for broadband board designs because they do not specify
>>> ecc setting in dts but rather using the strap setting.
>>>
>>> Signed-off-by: William Zhang <william.zhang@...adcom.com>
>>>
>>> ---
>>>
>>> Changes in v4:
>>> - Move ecc strap property to this separate patch and remove some
>>> non-binding related text from the description
>>>
>>> Changes in v3: None
>>> Changes in v2: None
>>>
>>>   Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml | 8 ++++++++
>>>   1 file changed, 8 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
>>> index d0168d55c73e..2599d902ec3a 100644
>>> --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
>>> +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
>>> @@ -147,6 +147,14 @@ patternProperties:
>>>             layout.
>>>           $ref: /schemas/types.yaml#/definitions/uint32
>>>   
>>> +      brcm,nand-ecc-use-strap:
>>> +        description:
>>> +          This flag indicates the ecc strength and spare area size should
>>> +          be retrieved from the SoC NAND boot strap setting instead of
>>> +          nand-ecc-strength and brcm,nand-oob-sector-size or auto detection.
>>
>> I'm still on the fence about this being overly prescriptive about the
>> operating systems behaviour. I think it would be good to say why the
>> strap values are better than those explicitly provided in DT rather than
>> just saying "these strap values should be used".
> 
> I don't know if there is a point is saying why they would be better, as
> they are not. It is a -questionable- design choice. However I would
> just get rid of any mention to other properties. Just say one should
> expect the strap value to be read and applied by the system when this
> property is present.
> 
Agree we don't need to say which is better as it is just a design 
choice. And it is used by all BCMBCA internal ref boards and customer 
designs. But if we just say strap value is read and applied, it is vague 
and nobody would know what is applied.  I replied this email yesterday 
and suggest the followings:

This property provides a choice for retrieving ecc strength and spare 
area size from the SoC NAND boot strap setting. It is commonly used by 
the BCMBCA SoC board design.

Hope this make everyone happy and we can move forward.


>>> +          This is commonly used by the BCMBCA SoC board design.
>>> +        $ref: /schemas/types.yaml#/definitions/flag
>>> +
>>>       unevaluatedProperties: false
>>>   
>>>   allOf:
>>> -- 
>>> 2.37.3
>>>    
> 
> 
> Thanks,
> Miquèl

Download attachment "smime.p7s" of type "application/pkcs7-signature" (4212 bytes)

Powered by blists - more mailing lists