linux-kernel - Re: [PATCH] cpufreq: Change default transition delay to 2ms

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240205074514.kiolurpounokalum@vireshk-i7>
Date: Mon, 5 Feb 2024 13:15:14 +0530
From: Viresh Kumar <viresh.kumar@...aro.org>
To: Qais Yousef <qyousef@...alina.io>
Cc: "Rafael J. Wysocki" <rafael@...nel.org>, linux-kernel@...r.kernel.org,
	linux-pm@...r.kernel.org, Ingo Molnar <mingo@...nel.org>,
	Peter Zijlstra <peterz@...radead.org>,
	Vincent Guittot <vincent.guittot@...aro.org>,
	Dietmar Eggemann <dietmar.eggemann@....com>
Subject: Re: [PATCH] cpufreq: Change default transition delay to 2ms

On 05-02-24, 02:25, Qais Yousef wrote:
> 10ms is too high for today's hardware, even low end ones. This default
> end up being used a lot on Arm machines at least. Pine64, mac mini and
> pixel 6 all end up with 10ms rate_limit_us when using schedutil, and
> it's too high for all of them.
> 
> Change the default to 2ms which should be 'pessimistic' enough for worst
> case scenario, but not too high for platforms with fast DVFS hardware.
> 
> Signed-off-by: Qais Yousef <qyousef@...alina.io>
> ---
>  drivers/cpufreq/cpufreq.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
> index 44db4f59c4cc..8207f7294cb6 100644
> --- a/drivers/cpufreq/cpufreq.c
> +++ b/drivers/cpufreq/cpufreq.c
> @@ -582,11 +582,11 @@ unsigned int cpufreq_policy_transition_delay_us(struct cpufreq_policy *policy)
>  		 * for platforms where transition_latency is in milliseconds, it
>  		 * ends up giving unrealistic values.
>  		 *
> -		 * Cap the default transition delay to 10 ms, which seems to be
> +		 * Cap the default transition delay to 2 ms, which seems to be
>  		 * a reasonable amount of time after which we should reevaluate
>  		 * the frequency.
>  		 */
> -		return min(latency * LATENCY_MULTIPLIER, (unsigned int)10000);
> +		return min(latency * LATENCY_MULTIPLIER, (unsigned int)(2*MSEC_PER_SEC));

Please add spaces around '*'.

Acked-by: Viresh Kumar <viresh.kumar@...aro.org>

-- 
viresh