[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240209171146.307465-2-romain.naour@smile.fr>
Date: Fri, 9 Feb 2024 18:11:46 +0100
From: Romain Naour <romain.naour@...le.fr>
To: linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
conor+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org,
robh+dt@...nel.org,
kristo@...nel.org,
vigneshr@...com,
nm@...com
Cc: Romain Naour <romain.naour@...le.fr>,
Neha Malcom Francis <n-francis@...com>
Subject: [PATCH v2 2/2] arm64: dts: ti: k3-j721e-sk: fix PMIC interrupt number
The tps659413 and tps659411 nodes set WKUP_GPIO0_7 (G28) pin as input
to be used as PMIC interrupt but uses 9 (WKUP_GPIO0_9) as
"interrupts" property.
Replace 9 by 7 for both tps659413 and tps659411 after checking in the
board schematic [1].
[1] https://www.ti.com/tool/SK-TDA4VM
Fixes: b808cef0be46 ("arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs")
Cc: Neha Malcom Francis <n-francis@...com>
Signed-off-by: Romain Naour <romain.naour@...le.fr>
---
v2: update tps659411 interrupts parameter too.
---
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 188dfe291a32..658764f7d544 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -574,7 +574,7 @@ tps659413: pmic@48 {
pinctrl-names = "default";
pinctrl-0 = <&pmic_irq_pins_default>;
interrupt-parent = <&wkup_gpio0>;
- interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
gpio-controller;
#gpio-cells = <2>;
ti,primary-pmic;
@@ -651,7 +651,7 @@ tps659411: pmic@4c {
reg = <0x4c>;
system-power-controller;
interrupt-parent = <&wkup_gpio0>;
- interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
gpio-controller;
#gpio-cells = <2>;
buck1234-supply = <&vsys_3v3>;
--
2.43.0
Powered by blists - more mailing lists