[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Zc42HIibtoXqLyEA@smile.fi.intel.com>
Date: Thu, 15 Feb 2024 18:04:44 +0200
From: Andy Shevchenko <andy@...nel.org>
To: Thomas Richard <thomas.richard@...tlin.com>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Tony Lindgren <tony@...mide.com>,
Haojian Zhuang <haojian.zhuang@...aro.org>,
Vignesh R <vigneshr@...com>, Aaro Koskinen <aaro.koskinen@....fi>,
Janusz Krzysztofik <jmkrzyszt@...il.com>,
Andi Shyti <andi.shyti@...nel.org>, Peter Rosin <peda@...ntia.se>,
Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kw@...ux.com>,
Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>,
linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-omap@...r.kernel.org,
linux-i2c@...r.kernel.org, linux-phy@...ts.infradead.org,
linux-pci@...r.kernel.org, gregory.clement@...tlin.com,
theo.lebrun@...tlin.com, thomas.petazzoni@...tlin.com,
u-kumar1@...com
Subject: Re: [PATCH v3 17/18] PCI: j721e: add reset GPIO to struct j721e_pcie
On Thu, Feb 15, 2024 at 04:18:02PM +0100, Thomas Richard wrote:
> From: Théo Lebrun <theo.lebrun@...tlin.com>
>
> Add reset GPIO to struct j721e_pcie, so it can be used at suspend and
> resume stages.
..
> case PCI_MODE_RC:
> - gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> - if (IS_ERR(gpiod)) {
> - ret = PTR_ERR(gpiod);
> + pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(pcie->reset_gpio)) {
> + ret = PTR_ERR(pcie->reset_gpio);
> if (ret != -EPROBE_DEFER)
> dev_err(dev, "Failed to get reset GPIO\n");
> goto err_get_sync;
> @@ -504,9 +504,9 @@ static int j721e_pcie_probe(struct platform_device *pdev)
> * mode is selected while enabling the PHY. So deassert PERST#
> * after 100 us.
> */
> - if (gpiod) {
> + if (pcie->reset_gpio) {
> usleep_range(100, 200);
> - gpiod_set_value_cansleep(gpiod, 1);
> + gpiod_set_value_cansleep(pcie->reset_gpio, 1);
> }
Instead of all this, just add one line assignment. Moreover, before or after
this patch refactor the code to use ret = dev_err_probe(...); pattern that
eliminates those deferral probe checks.
--
With Best Regards,
Andy Shevchenko
Powered by blists - more mailing lists