[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240216170930.cp5rg2iieaqogrwa@selected>
Date: Fri, 16 Feb 2024 11:09:30 -0600
From: Nishanth Menon <nm@...com>
To: Udit Kumar <u-kumar1@...com>
CC: <kristo@...nel.org>, <ssantosh@...nel.org>, <chandru@...com>,
<rishabh@...com>, <kamlesh@...com>, <francesco@...cini.it>,
<vigneshr@...com>, <mturquette@...libre.com>, <sboyd@...nel.org>,
<linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
<linux-clk@...r.kernel.org>
Subject: Re: [PATCH v4] clk: keystone: sci-clk: Adding support for non
contiguous clocks
On 13:56-20240213, Udit Kumar wrote:
> Most of clocks and their parents are defined in contiguous range,
> But in few cases, there is gap in clock numbers[0].
> Driver assumes clocks to be in contiguous range, and add their clock
> ids incrementally.
>
> New firmware started returning error while calling get_freq and is_on
> API for non-available clock ids.
>
> In this fix, driver checks and adds only valid clock ids.
>
> [0] https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j7200/clocks.html
> Section Clocks for NAVSS0_CPTS_0 Device, clock id 12-15 not present.
>
> Fixes: 3c13933c6033 ("clk: keystone: sci-clk: add support for dynamically probing clocks")
> Signed-off-by: Udit Kumar <u-kumar1@...com>
> ---
> Changelog
> Changes in v4
> - Added only incremental chanegs as per v3 discussion
> - Updated commit message
> - v3 was Reviewed-by, Dropping Reviewed-by as logic is changed
> Link to v3
> https://lore.kernel.org/all/20240207091100.4001428-1-u-kumar1@ti.com/
>
> Changes in v3
> - instead of get_freq, is_auto API is used to check validilty of clock
> - Address comments of v2, to have preindex increment
> Link to v2 https://lore.kernel.org/all/20240206104357.3803517-1-u-kumar1@ti.com/
>
> Changes in v2
> - Updated commit message
> - Simplified logic for valid clock id
> link to v1 https://lore.kernel.org/all/20240205044557.3340848-1-u-kumar1@ti.com/
>
>
> P.S
> Firmawre returns total num_parents count including non available ids.
> For above device id NAVSS0_CPTS_0, number of parents clocks are 16
> i.e from id 2 to 17. But out of these ids few are not valid.
> So driver adds only valid clock ids out ot total.
>
> Original logs
> https://gist.github.com/uditkumarti/de4b36b21247fb36725ad909ce4812f6#file-original-logs
> Line 2630 for error
>
> Logs with fix v4
> https://gist.github.com/uditkumarti/f25482a5e18e918010b790cffb39f572
> Line 2640
>
>
> drivers/clk/keystone/sci-clk.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/clk/keystone/sci-clk.c b/drivers/clk/keystone/sci-clk.c
> index 35fe197dd303..eb2ef44869b2 100644
> --- a/drivers/clk/keystone/sci-clk.c
> +++ b/drivers/clk/keystone/sci-clk.c
> @@ -516,6 +516,7 @@ static int ti_sci_scan_clocks_from_dt(struct sci_clk_provider *provider)
> struct sci_clk *sci_clk, *prev;
> int num_clks = 0;
> int num_parents;
> + bool state;
> int clk_id;
> const char * const clk_names[] = {
> "clocks", "assigned-clocks", "assigned-clock-parents", NULL
> @@ -586,6 +587,15 @@ static int ti_sci_scan_clocks_from_dt(struct sci_clk_provider *provider)
> clk_id = args.args[1] + 1;
>
> while (num_parents--) {
> + /* Check if this clock id is valid */
> + ret = provider->ops->is_auto(provider->sci,
> + sci_clk->dev_id, clk_id, &state);
> +
> + if (ret) {
> + clk_id++;
> + continue;
> + }
> +
Thanks. This makes more sense.
Reviewed-by: Nishanth Menon <nm@...com>
> sci_clk = devm_kzalloc(dev,
> sizeof(*sci_clk),
> GFP_KERNEL);
> --
> 2.34.1
>
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Powered by blists - more mailing lists