lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Fri, 16 Feb 2024 09:13:51 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: Jesper Nilsson <jesper.nilsson@...s.com>,
 Alexandre Torgue <alexandre.torgue@...s.st.com>,
 Jose Abreu <joabreu@...opsys.com>, "David S. Miller" <davem@...emloft.net>,
 Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
 Paolo Abeni <pabeni@...hat.com>, Maxime Coquelin <mcoquelin.stm32@...il.com>
Cc: netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com,
 linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
 kernel@...s.com
Subject: Re: [PATCH] net: stmmac: mmc_core: Assign, don't add interrupt
 registers

On 2/16/24 07:24, Jesper Nilsson wrote:
> The MMC IPC interrupt status and interrupt mask registers are of
> little use as Ethernet statistics, but incrementing counters
> based on the current interrupt and interrupt mask registers
> makes them worse than useless.
> 
> For example, if the interrupt mask is set to 0x08420842,
> the current code will increment by that amount each iteration,
> leading to the following sequence of nonsense:
> 
> mmc_rx_ipc_intr_mask: 969816526
> mmc_rx_ipc_intr_mask: 1108361744
> 
> Change the increment to a straight assignment to make the
> statistics at least nominally useful.
> 
> Signed-off-by: Jesper Nilsson <jesper.nilsson@...s.com>
> ---
>   drivers/net/ethernet/stmicro/stmmac/mmc_core.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
> index 6a7c1d325c46..6051a22b3cec 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
> @@ -280,8 +280,8 @@ static void dwmac_mmc_read(void __iomem *mmcaddr, struct stmmac_counters *mmc)
>   	mmc->mmc_rx_vlan_frames_gb += readl(mmcaddr + MMC_RX_VLAN_FRAMES_GB);
>   	mmc->mmc_rx_watchdog_error += readl(mmcaddr + MMC_RX_WATCHDOG_ERROR);
>   	/* IPC */
> -	mmc->mmc_rx_ipc_intr_mask += readl(mmcaddr + MMC_RX_IPC_INTR_MASK);
> -	mmc->mmc_rx_ipc_intr += readl(mmcaddr + MMC_RX_IPC_INTR);
> +	mmc->mmc_rx_ipc_intr_mask = readl(mmcaddr + MMC_RX_IPC_INTR_MASK);
> +	mmc->mmc_rx_ipc_intr = readl(mmcaddr + MMC_RX_IPC_INTR);

So in premise I agree with the patch, that incrementing those is not the 
right way to go about them. However these registers are currently 
provided as part of the statistics set, but they should instead be 
accessed via the register dumping method.

In either case you will get at best a snapshot of those two registers at 
any given time and I suppose this can help diagnose a stuck RX 
condition, but not much more than that.
-- 
Florian


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ