| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAA8EJpq8XvQm9B3RZq9PNMqA5VAqKUyVn5qt8-WEYMQMWniDZA@mail.gmail.com>
Date: Mon, 19 Feb 2024 16:53:35 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Konrad Dybcio <konrad.dybcio@...aro.org>
Cc: Will Deacon <will@...nel.org>, Robin Murphy <robin.murphy@....com>,
Joerg Roedel <joro@...tes.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>,
Bjorn Andersson <andersson@...nel.org>, Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Rob Clark <robdclark@...il.com>,
Abhinav Kumar <quic_abhinavk@...cinc.com>, Sean Paul <sean@...rly.run>,
David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>,
Marijn Suijten <marijn.suijten@...ainline.org>, linux-arm-kernel@...ts.infradead.org,
iommu@...ts.linux.dev, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Konrad Dybcio <konradybcio@...nel.org>,
linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org,
dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org
Subject: Re: [PATCH 3/8] clk: qcom: clk-alpha-pll: Add HUAYRA_2290 support
On Mon, 19 Feb 2024 at 15:36, Konrad Dybcio <konrad.dybcio@...aro.org> wrote:
>
> Commit 134b55b7e19f ("clk: qcom: support Huayra type Alpha PLL")
> introduced an entry to the alpha offsets array, but diving into QCM2290
> downstream and some documentation, it turned out that the name Huayra
> apparently has been used quite liberally across many chips, even with
> noticeably different hardware.
>
> Introduce another set of offsets and a new configure function for the
> Huayra PLL found on QCM2290. This is required e.g. for the consumers
> of GPUCC_PLL0 to properly start.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
> ---
> drivers/clk/qcom/clk-alpha-pll.c | 45 ++++++++++++++++++++++++++++++++++++++++
> drivers/clk/qcom/clk-alpha-pll.h | 3 +++
> 2 files changed, 48 insertions(+)
>
> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> index 8a412ef47e16..61b5abd13782 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.c
> +++ b/drivers/clk/qcom/clk-alpha-pll.c
> @@ -244,6 +244,19 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
> [PLL_OFF_OPMODE] = 0x30,
> [PLL_OFF_STATUS] = 0x3c,
> },
> + [CLK_ALPHA_PLL_TYPE_HUAYRA_2290] = {
> + [PLL_OFF_L_VAL] = 0x04,
> + [PLL_OFF_ALPHA_VAL] = 0x08,
> + [PLL_OFF_USER_CTL] = 0x0c,
> + [PLL_OFF_CONFIG_CTL] = 0x10,
> + [PLL_OFF_CONFIG_CTL_U] = 0x14,
> + [PLL_OFF_CONFIG_CTL_U1] = 0x18,
> + [PLL_OFF_TEST_CTL] = 0x1c,
> + [PLL_OFF_TEST_CTL_U] = 0x20,
> + [PLL_OFF_TEST_CTL_U1] = 0x24,
> + [PLL_OFF_OPMODE] = 0x28,
> + [PLL_OFF_STATUS] = 0x38,
> + },
Can you please move them next to the standard huayra PLL regs?
> };
> EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
>
> @@ -779,6 +792,38 @@ static long clk_alpha_pll_round_rate(struct clk_hw *hw, unsigned long rate,
> return clamp(rate, min_freq, max_freq);
> }
>
> +void clk_huayra_2290_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> + const struct alpha_pll_config *config)
> +{
> + clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL(pll), config->config_ctl_val);
> + clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL_U(pll), config->config_ctl_hi_val);
> + clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL_U1(pll), config->config_ctl_hi1_val);
> + clk_alpha_pll_write_config(regmap, PLL_TEST_CTL(pll), config->test_ctl_val);
> + clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U(pll), config->test_ctl_hi_val);
> + clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U1(pll), config->test_ctl_hi1_val);
> + clk_alpha_pll_write_config(regmap, PLL_L_VAL(pll), config->l);
> + clk_alpha_pll_write_config(regmap, PLL_ALPHA_VAL(pll), config->alpha);
> + clk_alpha_pll_write_config(regmap, PLL_USER_CTL(pll), config->user_ctl_val);
> +
> + /* Set PLL_BYPASSNL */
> + regmap_update_bits(regmap, PLL_MODE(pll), PLL_BYPASSNL, PLL_BYPASSNL);
> +
> + /* Wait 5 us between setting BYPASS and deasserting reset */
> + mb();
> + udelay(5);
> +
> + /* Take PLL out from reset state */
> + regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
> +
> + /* Wait 50us for PLL_LOCK_DET bit to go high */
> + mb();
> + usleep_range(50, 55);
> +
> + /* Enable PLL output */
> + regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, PLL_OUTCTRL);
> +}
> +EXPORT_SYMBOL(clk_huayra_2290_pll_configure);
> +
> static unsigned long
> alpha_huayra_pll_calc_rate(u64 prate, u32 l, u32 a)
> {
> diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
> index fb6d50263bb9..91d3d6f19eae 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.h
> +++ b/drivers/clk/qcom/clk-alpha-pll.h
> @@ -29,6 +29,7 @@ enum {
> CLK_ALPHA_PLL_TYPE_BRAMMO_EVO,
> CLK_ALPHA_PLL_TYPE_STROMER,
> CLK_ALPHA_PLL_TYPE_STROMER_PLUS,
> + CLK_ALPHA_PLL_TYPE_HUAYRA_2290,
Also next to standard huayra PLL, please.
> CLK_ALPHA_PLL_TYPE_MAX,
> };
>
> @@ -191,6 +192,8 @@ extern const struct clk_ops clk_alpha_pll_rivian_evo_ops;
>
> void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> const struct alpha_pll_config *config);
> +void clk_huayra_2290_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> + const struct alpha_pll_config *config);
> void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> const struct alpha_pll_config *config);
> void clk_trion_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
>
> --
> 2.43.2
>
--
With best wishes
Dmitry
Powered by blists - more mailing lists