linux-kernel - Re: [PATCH 6/9] arm64: dts: qcom: qcs6490-rb3gen2: Enable USB role switching

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAA8EJppAVehWUeLAqEAq8A3nq-o2g=8GK--XRVWtDV7-0BCskA@mail.gmail.com>
Date: Thu, 22 Feb 2024 01:50:12 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Bjorn Andersson <quic_bjorande@...cinc.com>
Cc: Rob Clark <robdclark@...il.com>, Abhinav Kumar <quic_abhinavk@...cinc.com>, 
	Sean Paul <sean@...rly.run>, Marijn Suijten <marijn.suijten@...ainline.org>, 
	David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>, cros-qcom-dts-watchers@...omium.org, 
	Bjorn Andersson <andersson@...nel.org>, Konrad Dybcio <konrad.dybcio@...aro.org>, 
	Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, 
	Conor Dooley <conor+dt@...nel.org>, linux-arm-msm@...r.kernel.org, 
	dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org, 
	linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH 6/9] arm64: dts: qcom: qcs6490-rb3gen2: Enable USB role switching

On Thu, 22 Feb 2024 at 01:19, Bjorn Andersson <quic_bjorande@...cinc.com> wrote:
>
> With the ADSP remoteproc loaded pmic_glink can be introduced and wired
> up to provide role and orientation switching signals.
>
> Signed-off-by: Bjorn Andersson <quic_bjorande@...cinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 48 +++++++++++++++++++++++++++-
>  1 file changed, 47 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> index ab498494caea..079bf43b14cc 100644
> --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> @@ -121,6 +121,41 @@ debug_vm_mem: debug-vm@...00000 {
>                 };
>         };
>
> +       pmic-glink {
> +               compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink";
> +
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               connector@0 {
> +                       compatible = "usb-c-connector";
> +                       reg = <0>;
> +                       power-role = "dual";
> +                       data-role = "dual";
> +
> +                       ports {
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               port@0 {
> +                                       reg = <0>;
> +
> +                                       pmic_glink_hs_in: endpoint {
> +                                               remote-endpoint = <&usb_1_dwc3_hs>;
> +                                       };
> +                               };
> +
> +                               port@1 {
> +                                       reg = <1>;
> +
> +                                       pmic_glink_ss_in: endpoint {
> +                                               remote-endpoint = <&usb_1_dwc3_ss>;

This should be connected to the QMP PHY rather than to the USB host.

Also it might be better to squash this patch with the patch 8. Or at
least to get redriver into the picture in this patch (and keep only
display-related parts in that patch).


> +                                       };
> +                               };
> +                       };
> +               };
> +       };
> +
>         vph_pwr: vph-pwr-regulator {
>                 compatible = "regulator-fixed";
>                 regulator-name = "vph_pwr";
> @@ -476,7 +511,16 @@ &usb_1 {
>  };
>
>  &usb_1_dwc3 {
> -       dr_mode = "peripheral";
> +       dr_mode = "otg";
> +       usb-role-switch;
> +};
> +
> +&usb_1_dwc3_hs {
> +       remote-endpoint = <&pmic_glink_hs_in>;
> +};
> +
> +&usb_1_dwc3_ss {
> +       remote-endpoint = <&pmic_glink_ss_in>;
>  };
>
>  &usb_1_hsphy {
> @@ -491,6 +535,8 @@ &usb_1_qmpphy {
>         vdda-phy-supply = <&vreg_l6b_1p2>;
>         vdda-pll-supply = <&vreg_l1b_0p912>;
>
> +       orientation-switch;
> +
>         status = "okay";
>  };
>
>
> --
> 2.25.1
>


--
With best wishes
Dmitry