lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date: Sat, 24 Feb 2024 01:15:23 +0530
From: Radhey Shyam Pandey <radhey.shyam.pandey@....com>
To: <Thinh.Nguyen@...opsys.com>, <gregkh@...uxfoundation.org>
CC: <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>, <git@....com>
Subject: [PATCH v2] usb: dwc3: core: enable CCI support for AMD-xilinx DWC3 controller

From: Piyush Mehta <piyush.mehta@....com>

The GSBUSCFG0 register bits [31:16] are used to configure the cache type
settings of the descriptor and data write/read transfers (Cacheable,
Bufferable/ Posted). When CCI is enabled in the design, DWC3 core GSBUSCFG0
cache bits must be updated to support CCI enabled transfers in USB.

Signed-off-by: Piyush Mehta <piyush.mehta@....com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@....com>
----
changes for v2:
Make GSBUSCFG0 configuration specific to AMD-xilinx platform.
Taken reference from existing commit ec5eb43813a4 ("usb: dwc3: core:
add support for realtek SoCs custom's global register start address")

v1 link:
https://lore.kernel.org/all/20231013053448.11056-1-piyush.mehta@amd.com
---
 drivers/usb/dwc3/core.c | 26 ++++++++++++++++++++++++++
 drivers/usb/dwc3/core.h |  5 +++++
 2 files changed, 31 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 3e55838c0001..3acd4ab3fcca 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -23,6 +23,7 @@
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_graph.h>
 #include <linux/acpi.h>
 #include <linux/pinctrl/consumer.h>
@@ -559,6 +560,29 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc)
 		parms->hwparams9 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS9);
 }
 
+static void dwc3_config_soc_bus(struct dwc3 *dwc)
+{
+	if (dwc->dev->of_node) {
+		struct device_node *parent = of_get_parent(dwc->dev->of_node);
+
+		if (of_device_is_compatible(parent, "xlnx,zynqmp-dwc3") ||
+		    of_device_is_compatible(parent, "xlnx,versal-dwc3")) {
+			if (of_dma_is_coherent(dwc->dev->of_node)) {
+				u32 reg;
+
+				reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0);
+				reg |= DWC3_GSBUSCFG0_DATRDREQINFO_MASK |
+					DWC3_GSBUSCFG0_DESRDREQINFO_MASK |
+					DWC3_GSBUSCFG0_DATWRREQINFO_MASK |
+					DWC3_GSBUSCFG0_DESWRREQINFO_MASK;
+				dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg);
+			}
+		}
+
+		of_node_put(parent);
+	}
+}
+
 static int dwc3_core_ulpi_init(struct dwc3 *dwc)
 {
 	int intf;
@@ -1256,6 +1280,8 @@ static int dwc3_core_init(struct dwc3 *dwc)
 
 	dwc3_set_incr_burst_type(dwc);
 
+	dwc3_config_soc_bus(dwc);
+
 	ret = dwc3_phy_power_on(dwc);
 	if (ret)
 		goto err_exit_phy;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 25dc0599345e..bf19a20e240f 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -175,6 +175,11 @@
 #define DWC3_LLUCTL		0xd024
 
 /* Bit fields */
+/* Global SoC Bus Configuration Register: AHB-prot/AXI-cache/OCP-ReqInfo */
+#define DWC3_GSBUSCFG0_DATRDREQINFO_MASK	GENMASK(31, 28)
+#define DWC3_GSBUSCFG0_DESRDREQINFO_MASK	GENMASK(27, 24)
+#define DWC3_GSBUSCFG0_DATWRREQINFO_MASK	GENMASK(23, 20)
+#define DWC3_GSBUSCFG0_DESWRREQINFO_MASK	GENMASK(19, 16)
 
 /* Global SoC Bus Configuration INCRx Register 0 */
 #define DWC3_GSBUSCFG0_INCR256BRSTENA	(1 << 7) /* INCR256 burst */
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ