[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240223224940.y34qflo2azxrvksy@synopsys.com>
Date: Fri, 23 Feb 2024 22:49:41 +0000
From: Thinh Nguyen <Thinh.Nguyen@...opsys.com>
To: Radhey Shyam Pandey <radhey.shyam.pandey@....com>
CC: Thinh Nguyen <Thinh.Nguyen@...opsys.com>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"git@....com" <git@....com>
Subject: Re: [PATCH v2] usb: dwc3: core: enable CCI support for AMD-xilinx
DWC3 controller
On Sat, Feb 24, 2024, Radhey Shyam Pandey wrote:
> From: Piyush Mehta <piyush.mehta@....com>
>
> The GSBUSCFG0 register bits [31:16] are used to configure the cache type
> settings of the descriptor and data write/read transfers (Cacheable,
> Bufferable/ Posted). When CCI is enabled in the design, DWC3 core GSBUSCFG0
> cache bits must be updated to support CCI enabled transfers in USB.
>
> Signed-off-by: Piyush Mehta <piyush.mehta@....com>
> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@....com>
> ----
> changes for v2:
> Make GSBUSCFG0 configuration specific to AMD-xilinx platform.
> Taken reference from existing commit ec5eb43813a4 ("usb: dwc3: core:
> add support for realtek SoCs custom's global register start address")
>
> v1 link:
> https://urldefense.com/v3/__https://lore.kernel.org/all/20231013053448.11056-1-piyush.mehta@amd.com__;!!A4F2R9G_pg!ffADlNJmRyCb1C2B0z21-8AbJE4YDyiXNxKBKBqmhmBOSSZBokHS_qyetGEqb7Cwawe0Wvbz2aqSZz_bTfvS0cXdwXLVWw$
Please check the comment from the previous thread:
https://lore.kernel.org/linux-usb/20240223224744.vptvfkqzgqv24ptz@synopsys.com/T/#t
Thanks,
Thinh
> ---
> drivers/usb/dwc3/core.c | 26 ++++++++++++++++++++++++++
> drivers/usb/dwc3/core.h | 5 +++++
> 2 files changed, 31 insertions(+)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 3e55838c0001..3acd4ab3fcca 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -23,6 +23,7 @@
> #include <linux/delay.h>
> #include <linux/dma-mapping.h>
> #include <linux/of.h>
> +#include <linux/of_address.h>
> #include <linux/of_graph.h>
> #include <linux/acpi.h>
> #include <linux/pinctrl/consumer.h>
> @@ -559,6 +560,29 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc)
> parms->hwparams9 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS9);
> }
>
> +static void dwc3_config_soc_bus(struct dwc3 *dwc)
> +{
> + if (dwc->dev->of_node) {
> + struct device_node *parent = of_get_parent(dwc->dev->of_node);
> +
> + if (of_device_is_compatible(parent, "xlnx,zynqmp-dwc3") ||
> + of_device_is_compatible(parent, "xlnx,versal-dwc3")) {
> + if (of_dma_is_coherent(dwc->dev->of_node)) {
> + u32 reg;
> +
> + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0);
> + reg |= DWC3_GSBUSCFG0_DATRDREQINFO_MASK |
> + DWC3_GSBUSCFG0_DESRDREQINFO_MASK |
> + DWC3_GSBUSCFG0_DATWRREQINFO_MASK |
> + DWC3_GSBUSCFG0_DESWRREQINFO_MASK;
> + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg);
> + }
> + }
> +
> + of_node_put(parent);
> + }
> +}
> +
> static int dwc3_core_ulpi_init(struct dwc3 *dwc)
> {
> int intf;
> @@ -1256,6 +1280,8 @@ static int dwc3_core_init(struct dwc3 *dwc)
>
> dwc3_set_incr_burst_type(dwc);
>
> + dwc3_config_soc_bus(dwc);
> +
> ret = dwc3_phy_power_on(dwc);
> if (ret)
> goto err_exit_phy;
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 25dc0599345e..bf19a20e240f 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -175,6 +175,11 @@
> #define DWC3_LLUCTL 0xd024
>
> /* Bit fields */
> +/* Global SoC Bus Configuration Register: AHB-prot/AXI-cache/OCP-ReqInfo */
> +#define DWC3_GSBUSCFG0_DATRDREQINFO_MASK GENMASK(31, 28)
> +#define DWC3_GSBUSCFG0_DESRDREQINFO_MASK GENMASK(27, 24)
> +#define DWC3_GSBUSCFG0_DATWRREQINFO_MASK GENMASK(23, 20)
> +#define DWC3_GSBUSCFG0_DESWRREQINFO_MASK GENMASK(19, 16)
>
> /* Global SoC Bus Configuration INCRx Register 0 */
> #define DWC3_GSBUSCFG0_INCR256BRSTENA (1 << 7) /* INCR256 burst */
> --
> 2.34.1
>
Powered by blists - more mailing lists