| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240223215620.GA9299@packtop>
Date: Fri, 23 Feb 2024 21:56:30 +0000
From: Zev Weiss <zweiss@...inix.com>
To: Kelly Hung <ppighouse@...il.com>
CC: "robh+dt@...nel.org" <robh+dt@...nel.org>,
"devicetree@...r.kernel.org"
<devicetree@...r.kernel.org>,
"conor+dt@...nel.org" <conor+dt@...nel.org>,
"linux-aspeed@...ts.ozlabs.org" <linux-aspeed@...ts.ozlabs.org>,
"openbmc@...ts.ozlabs.org" <openbmc@...ts.ozlabs.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Kelly Hung
<Kelly_Hung@...s.com>, "joel@....id.au" <joel@....id.au>,
"krzysztof.kozlowski+dt@...aro.org" <krzysztof.kozlowski+dt@...aro.org>,
"Allenyy_Hsu@...s.com" <Allenyy_Hsu@...s.com>,
"linux-arm-kernel@...ts.infradead.org" <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 2/2] ARM: dts: aspeed: x4tf: Add dts for asus x4tf project
On Thu, Feb 22, 2024 at 12:59:14AM PST, Kelly Hung wrote:
>Base on aspeed-g6.dtsi and can boot into BMC console.
>
>Signed-off-by: Kelly Hung <Kelly_Hung@...s.com>
>---
> arch/arm/boot/dts/aspeed/Makefile | 1 +
> .../boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts | 592 ++++++++++++++++++
> 2 files changed, 593 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
>
>diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
>index d3ac20e31..32c41f3d9 100644
>--- a/arch/arm/boot/dts/aspeed/Makefile
>+++ b/arch/arm/boot/dts/aspeed/Makefile
>@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-arm-stardragon4800-rep2.dtb \
> aspeed-bmc-asrock-e3c246d4i.dtb \
> aspeed-bmc-asrock-romed8hm3.dtb \
>+ aspeed-bmc-asus-x4tf.dtb \
> aspeed-bmc-bytedance-g220a.dtb \
> aspeed-bmc-delta-ahe50dc.dtb \
> aspeed-bmc-facebook-bletchley.dtb \
>diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
>new file mode 100644
>index 000000000..1bda14a66
>--- /dev/null
>+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
>@@ -0,0 +1,592 @@
>+// SPDX-License-Identifier: GPL-2.0-or-later
>+// Copyright 2024 ASUS Corp.
>+
>+/dts-v1/;
>+
>+#include "aspeed-g6.dtsi"
>+#include "aspeed-g6-pinctrl.dtsi"
>+#include <dt-bindings/i2c/i2c.h>
>+#include <dt-bindings/gpio/aspeed-gpio.h>
>+
>+/ {
>+ model = "ASUS-X4TF";
>+ compatible = "asus,x4tf", "aspeed,ast2600";
>+
>+ aliases {
>+ serial4 = &uart5;
>+ };
>+
>+ chosen {
>+ stdout-path = "serial4:115200n8";
>+ };
>+
>+ memory@...00000 {
>+ device_type = "memory";
>+ reg = <0x80000000 0x40000000>;
>+ };
>+
>+ reserved-memory {
>+ #address-cells = <1>;
>+ #size-cells = <1>;
>+ ranges;
>+
>+ video_engine_memory: video {
>+ size = <0x04000000>;
>+ alignment = <0x01000000>;
>+ compatible = "shared-dma-pool";
>+ reusable;
>+ };
>+ };
>+
>+ iio-hwmon {
>+ compatible = "iio-hwmon";
>+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
>+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
>+ <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
>+ <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
>+ };
>+
>+ leds {
>+ compatible = "gpio-leds";
>+
>+ led-heartbeat {
>+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
>+ linux,default-trigger = "heartbeat";
>+ };
>+
>+ led-uid {
>+ gpios = <&gpio0 ASPEED_GPIO(P, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
>+ default-state = "off";
>+ };
>+
>+ led-status_Y {
>+ gpios = <&gpio1 ASPEED_GPIO(B, 1) GPIO_ACTIVE_LOW>;
>+ default-state = "off";
>+ };
>+
>+ led-sys_boot_status {
>+ gpios = <&gpio1 ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
>+ default-state = "off";
>+ };
>+ };
>+};
>+
>+&adc0 {
>+ vref = <2500>;
>+ status = "okay";
>+ pinctrl-names = "default";
>+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
>+ &pinctrl_adc2_default &pinctrl_adc3_default
>+ &pinctrl_adc4_default &pinctrl_adc5_default
>+ &pinctrl_adc6_default &pinctrl_adc7_default>;
>+};
>+
>+&adc1 {
>+ vref = <2500>;
>+ status = "okay";
>+ pinctrl-names = "default";
>+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
>+ &pinctrl_adc10_default &pinctrl_adc11_default
>+ &pinctrl_adc12_default &pinctrl_adc13_default
>+ &pinctrl_adc14_default &pinctrl_adc15_default>;
>+};
>+
>+&peci0 {
>+ status = "okay";
>+};
>+
>+&lpc_snoop {
>+ snoop-ports = <0x80>;
>+ status = "okay";
>+};
>+
>+&mac2 {
>+ status = "okay";
>+ phy-mode = "rmii";
>+ use-ncsi;
>+ pinctrl-names = "default";
>+ pinctrl-0 = <&pinctrl_rmii3_default>;
>+};
>+
>+&mac3 {
>+ status = "okay";
>+ phy-mode = "rmii";
>+ use-ncsi;
>+ pinctrl-names = "default";
>+ pinctrl-0 = <&pinctrl_rmii4_default>;
>+};
>+
>+&fmc {
>+ status = "okay";
>+
>+ flash@0 {
>+ status = "okay";
>+ m25p,fast-read;
>+ label = "bmc-spi";
Is this specific label needed or desired for some particular reason?
Most OpenBMC platforms just call it "bmc", and I think some of the
firmware-update machinery may have assumptions about that baked in, so I
wouldn't be surprised if this naming breaks things...
>+ spi-max-frequency = <50000000>;
>+#include "openbmc-flash-layout-128.dtsi"
Just to confirm, this is actually a 128MB flash chip? I ask because the
previous version of this patch had some indication of it being 64MB
(though there was a lot that looked wonky with the partition layout, so
maybe that was wrong too).
>+ };
>+};
>+
>+&spi1 {
>+ status = "okay";
>+ pinctrl-names = "default";
>+ pinctrl-0 = <&pinctrl_spi1_default>;
>+
>+ flash@0 {
>+ status = "okay";
>+ label = "bios-spi";
>+ spi-max-frequency = <50000000>;
>+
>+ partitions {
>+ compatible = "fixed-partitions";
>+ #address-cells = <1>;
>+ #size-cells = <1>;
>+
>+ biosfullimg@0 {
>+ reg = <0x0 0x2000000>; //32768 *1024 = 32 MB
>+ label = "biosfullimg";
>+ };
>+ };
If there's only one partition that's just covering the whole chip
there's no need to include the 'partitions' child node.
>+ };
>+};
>+
>+&i2c0 {
>+ status = "okay";
>+};
>+
>+&i2c1 {
>+ status = "okay";
>+};
>+
>+&i2c2 {
>+ status = "okay";
>+};
>+
>+&i2c3 {
>+ status = "okay";
>+};
>+
>+&i2c4 {
>+ status = "okay";
>+
>+ temperature-sensor@48 {
>+ compatible = "ti,tmp75";
>+ reg = <0x48>;
>+ };
>+
>+ temperature-sensor@49 {
>+ compatible = "ti,tmp75";
>+ reg = <0x49>;
>+ };
>+
>+ pca9555_4_20: gpio@20 {
>+ compatible = "nxp,pca9555";
>+ reg = <0x20>;
>+ gpio-controller;
>+ #gpio-cells = <2>;
>+ };
>+
>+ pca9555_4_22: gpio@22 {
>+ compatible = "nxp,pca9555";
>+ reg = <0x22>;
>+ gpio-controller;
>+ #gpio-cells = <2>;
>+ };
>+
>+ pca9555_4_24: gpio@24 {
>+ compatible = "nxp,pca9555";
>+ reg = <0x24>;
>+ gpio-controller;
>+ #gpio-cells = <2>;
>+ gpio-line-names =
>+ /*A0 - A3 0*/ "", "STRAP_BMC_BATTERY_GPIO1", "", "",
>+ /*A4 - A7 4*/ "", "", "", "",
>+ /*B0 - B7 8*/ "", "", "", "", "", "", "", "";
>+ };
>+
>+ pca9555_4_26: gpio@26 {
>+ compatible = "nxp,pca9555";
>+ reg = <0x26>;
>+ gpio-controller;
>+ #gpio-cells = <2>;
>+ };
>+
>+ i2c-mux@70 {
>+ compatible = "nxp,pca9546";
>+ status = "okay";
>+ reg = <0x70>;
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+
>+ channel_1: i2c@0 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ reg = <0>;
>+ };
>+
>+ channel_2: i2c@1 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ reg = <1>;
>+ };
>+
>+ channel_3: i2c@2 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ reg = <2>;
>+ };
>+
>+ channel_4: i2c@3 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ reg = <3>;
>+ };
>+ };
>+};
>+
>+&i2c5 {
>+ status = "okay";
>+
>+ pca9555_5_24: gpio@24 {
>+ compatible = "nxp,pca9555";
>+ reg = <0x24>;
>+ gpio-controller;
>+ #gpio-cells = <2>;
>+ };
>+
>+ i2c-mux@70 {
>+ compatible = "nxp,pca9546";
>+ status = "okay";
>+ reg = <0x70 >;
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+
>+ channel_5: i2c@0 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ reg = <0>;
>+
>+ pca9555_5_5_20: gpio@20 {
>+ compatible = "nxp,pca9555";
>+ reg = <0x20>;
>+ gpio-controller;
>+ #gpio-cells = <2>;
>+ gpio-line-names =
>+ "", "", "", "", "", "", "", "",
>+ "", "", "SYS_FAN6", "SYS_FAN5",
>+ "SYS_FAN4", "SYS_FAN3",
>+ "SYS_FAN2", "SYS_FAN1";
>+ };
>+
>+ pca9555_5_5_21: gpio@21 {
>+ compatible = "nxp,pca9555";
>+ reg = <0x21>;
>+ gpio-controller;
>+ #gpio-cells = <2>;
>+ };
>+
>+ power-monitor@44 {
>+ compatible = "ti,ina219";
>+ reg = <0x44>;
>+ shunt-resistor = <2>;
>+ };
>+ };
>+
>+ channel_6: i2c@1 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ reg = <1>;
>+ };
>+
>+ channel_7: i2c@2 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ reg = <2>;
>+ };
>+
>+ channel_8: i2c@3 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ reg = <3>;
>+ };
>+ };
>+};
>+
>+&i2c6 {
>+ status = "okay";
>+
>+ pca9555_6_27: gpio@27 {
>+ compatible = "nxp,pca9555";
>+ reg = <0x27>;
>+ gpio-controller;
>+ #gpio-cells = <2>;
>+ };
>+
>+ pca9555_6_20: gpio@20 {
>+ compatible = "nxp,pca9555";
>+ reg = <0x20>;
>+ gpio-controller;
>+ #gpio-cells = <2>;
>+ gpio-line-names =
>+ /*A0 0*/ "", "", "", "", "", "", "", "",
>+ /*B0 8*/ "Drive_NVMe1", "Drive_NVMe2", "", "",
>+ /*B4 12*/ "", "", "", "";
>+ };
>+
>+ pca9555_6_21: gpio@21 {
>+ compatible = "nxp,pca9555";
>+ reg = <0x21>;
>+ gpio-controller;
>+ #gpio-cells = <2>;
>+ };
>+};
>+
>+&i2c7 {
>+ status = "okay";
>+
>+ i2c-mux@70 {
>+ compatible = "nxp,pca9546";
>+ status = "okay";
>+ reg = <0x70>;
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ idle-state = <1>;
>+
>+ channel_9: i2c@0 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ reg = <0>;
>+
>+ temperature-sensor@48 {
>+ compatible = "ti,tmp75";
>+ reg = <0x48>;
>+ };
>+
>+ temperature-sensor@49 {
>+ compatible = "ti,tmp75";
>+ reg = <0x49>;
>+ };
>+
>+ power-monitor@40 {
>+ compatible = "ti,ina219";
>+ reg = <0x40>;
>+ shunt-resistor = <2>;
>+ };
>+
>+ power-monitor@41 {
>+ compatible = "ti,ina219";
>+ reg = <0x41>;
>+ shunt-resistor = <5>;
>+ };
>+ };
>+
>+ channel_10: i2c@1 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ reg = <1>;
>+ };
>+
>+ channel_11: i2c@2 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ reg = <2>;
>+ };
>+
>+ channel_12: i2c@3 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ reg = <3>;
>+ };
>+ };
>+
>+ i2c-mux@71 {
>+ compatible = "nxp,pca9546";
>+ status = "okay";
>+ reg = <0x71>;
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ i2c-mux-idle-disconnect;
>+
>+ channel_13: i2c@0 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ reg = <0>;
>+ };
>+
>+ channel_14: i2c@1 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ reg = <1>;
>+ };
>+
>+ channel_15: i2c@2 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ reg = <2>;
>+ };
>+
>+ channel_16: i2c@3 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ reg = <3>;
>+ };
>+ };
>+};
>+
>+&i2c8 {
>+ status = "okay";
>+
>+ i2c-mux@70 {
>+ compatible = "nxp,pca9546";
>+ status = "okay";
>+ reg = <0x70>;
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ i2c-mux-idle-disconnect;
>+
>+ channel_17: i2c@0 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ reg = <0>;
>+ };
>+
>+ channel_18: i2c@1 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ reg = <1>;
>+
>+ temperature-sensor@48 {
>+ compatible = "ti,tmp75";
>+ reg = <0x48>;
>+ };
>+
>+ power-monitor@41 {
>+ compatible = "ti,ina219";
>+ reg = <0x41>;
>+ shunt-resistor = <5>;
>+ };
>+ };
>+
>+ channel_19: i2c@2 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ reg = <2>;
>+ };
>+
>+ channel_20: i2c@3 {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ reg = <3>;
>+ };
>+ };
>+};
>+
>+&i2c9 {
>+ status = "okay";
>+};
>+
>+&i2c10 {
>+ status = "okay";
>+};
>+
>+&i2c11 {
>+ status = "okay";
>+};
>+
>+&i2c14 {
>+ status = "okay";
>+ multi-master;
>+
>+ eeprom@50 {
>+ compatible = "atmel,24c08";
>+ reg = <0x50>;
>+ };
>+
>+ eeprom@51 {
>+ compatible = "atmel,24c08";
>+ reg = <0x51>;
>+ };
>+};
>+
>+&sgpiom0 {
>+ status = "okay";
>+ ngpios = <128>;
>+};
>+
>+&video {
>+ status = "okay";
>+ memory-region = <&video_engine_memory>;
>+};
>+
>+&sdc {
>+ status = "okay";
>+};
>+
>+&lpc_snoop {
>+ status = "okay";
>+ snoop-ports = <0x80>;
>+};
>+
>+&kcs1 {
>+ aspeed,lpc-io-reg = <0xca0>;
>+ status = "okay";
>+};
>+
>+&kcs2 {
>+ aspeed,lpc-io-reg = <0xca8>;
>+ status = "okay";
>+};
>+
>+&kcs3 {
>+ aspeed,lpc-io-reg = <0xca2>;
>+ status = "okay";
>+};
>+
>+&uart3 {
>+ status = "okay";
>+};
>+
>+&uart5 {
>+ status = "okay";
>+};
>+
>+&uart_routing {
>+ status = "okay";
>+};
>+
>+&vhub {
>+ status = "okay";
>+};
>+
>+&gpio0 {
>+ gpio-line-names =
>+ /*A0 0*/ "", "", "", "", "", "", "", "",
>+ /*B0 8*/ "", "", "", "", "", "", "PS_PWROK", "",
>+ /*C0 16*/ "", "", "", "", "", "", "", "",
>+ /*D0 24*/ "", "", "", "", "", "", "", "",
>+ /*E0 32*/ "", "", "", "", "", "", "", "",
>+ /*F0 40*/ "", "", "", "", "", "", "", "",
>+ /*G0 48*/ "", "", "", "", "", "", "", "",
>+ /*H0 56*/ "", "", "", "", "", "", "", "",
>+ /*I0 64*/ "", "", "", "", "", "", "", "",
>+ /*J0 72*/ "", "", "", "", "", "", "", "",
>+ /*K0 80*/ "", "", "", "", "", "", "", "",
>+ /*L0 88*/ "", "", "", "", "", "", "", "",
>+ /*M0 96*/ "", "", "", "", "", "", "", "",
>+ /*N0 104*/ "", "", "", "",
>+ /*N4 108*/ "POST_COMPLETE", "ESR1_GPIO_AST_SPISEL", "", "",
>+ /*O0 112*/ "", "", "", "", "", "", "", "",
>+ /*P0 120*/ "ID_BUTTON", "ID_OUT", "POWER_BUTTON", "POWER_OUT",
>+ /*P4 124*/ "RESET_BUTTON", "RESET_OUT", "", "HEARTBEAT",
>+ /*Q0 128*/ "", "", "", "", "", "", "", "",
>+ /*R0 136*/ "", "", "", "", "", "", "", "",
>+ /*S0 144*/ "", "", "", "", "", "", "", "",
>+ /*T0 152*/ "", "", "", "", "", "", "", "",
>+ /*U0 160*/ "", "", "", "", "", "", "", "",
>+ /*V0 168*/ "", "", "", "", "", "", "", "",
>+ /*W0 176*/ "", "", "", "", "", "", "", "",
>+ /*X0 184*/ "", "", "", "", "", "", "", "",
>+ /*Y0 192*/ "", "", "", "", "", "", "", "",
>+ /*Z0 200*/ "", "", "", "", "", "", "", "";
>+};
>--
>2.25.1
>
Powered by blists - more mailing lists