linux-kernel - [PATCH md-6.9 v2 02/10] md/raid1: record nonrot rdevs while adding/removing rdevs to conf

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240227120327.1432511-3-yukuai1@huaweicloud.com>
Date: Tue, 27 Feb 2024 20:03:19 +0800
From: Yu Kuai <yukuai1@...weicloud.com>
To: xni@...hat.com,
	paul.e.luse@...ux.intel.com,
	song@...nel.org,
	shli@...com,
	neilb@...e.com
Cc: linux-raid@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	yukuai3@...wei.com,
	yukuai1@...weicloud.com,
	yi.zhang@...wei.com,
	yangerkun@...wei.com
Subject: [PATCH md-6.9 v2 02/10] md/raid1: record nonrot rdevs while adding/removing rdevs to conf

From: Yu Kuai <yukuai3@...wei.com>

For raid1, each read will iterate all the rdevs from conf and check if
any rdev is non-rotational, then choose rdev with minimal IO inflight
if so, or rdev with closest distance otherwise.

Disk nonrot info can be changed through sysfs entry:

/sys/block/[disk_name]/queue/rotational

However, consider that this should only be used for testing, and user
really shouldn't do this in real life. Record the number of non-rotational
disks in conf, to avoid checking each rdev in IO fast path and simplify
read_balance() a little bit.

Co-developed-by: Paul Luse <paul.e.luse@...ux.intel.com>
Signed-off-by: Paul Luse <paul.e.luse@...ux.intel.com>
Signed-off-by: Yu Kuai <yukuai3@...wei.com>
---
 drivers/md/md.h    |  1 +
 drivers/md/raid1.c | 17 ++++++++++-------
 drivers/md/raid1.h |  1 +
 3 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/md/md.h b/drivers/md/md.h
index a49ab04ab707..b2076a165c10 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -207,6 +207,7 @@ enum flag_bits {
 				 * check if there is collision between raid1
 				 * serial bios.
 				 */
+	Nonrot,			/* non-rotational device (SSD) */
 };
 
 static inline int is_badblock(struct md_rdev *rdev, sector_t s, int sectors,
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index a145fe48b9ce..0fed01b06de9 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -599,7 +599,6 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 	int sectors;
 	int best_good_sectors;
 	int best_disk, best_dist_disk, best_pending_disk;
-	int has_nonrot_disk;
 	int disk;
 	sector_t best_dist;
 	unsigned int min_pending;
@@ -620,7 +619,6 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 	best_pending_disk = -1;
 	min_pending = UINT_MAX;
 	best_good_sectors = 0;
-	has_nonrot_disk = 0;
 	choose_next_idle = 0;
 	clear_bit(R1BIO_FailFast, &r1_bio->state);
 
@@ -637,7 +635,6 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 		sector_t first_bad;
 		int bad_sectors;
 		unsigned int pending;
-		bool nonrot;
 
 		rdev = conf->mirrors[disk].rdev;
 		if (r1_bio->bios[disk] == IO_BLOCKED
@@ -703,8 +700,6 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 			/* At least two disks to choose from so failfast is OK */
 			set_bit(R1BIO_FailFast, &r1_bio->state);
 
-		nonrot = bdev_nonrot(rdev->bdev);
-		has_nonrot_disk |= nonrot;
 		pending = atomic_read(&rdev->nr_pending);
 		dist = abs(this_sector - conf->mirrors[disk].head_position);
 		if (choose_first) {
@@ -731,7 +726,7 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 			 * small, but not a big deal since when the second disk
 			 * starts IO, the first disk is likely still busy.
 			 */
-			if (nonrot && opt_iosize > 0 &&
+			if (test_bit(Nonrot, &rdev->flags) && opt_iosize > 0 &&
 			    mirror->seq_start != MaxSector &&
 			    mirror->next_seq_sect > opt_iosize &&
 			    mirror->next_seq_sect - opt_iosize >=
@@ -763,7 +758,7 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
 	 * mixed ratation/non-rotational disks depending on workload.
 	 */
 	if (best_disk == -1) {
-		if (has_nonrot_disk || min_pending == 0)
+		if (READ_ONCE(conf->nonrot_disks) || min_pending == 0)
 			best_disk = best_pending_disk;
 		else
 			best_disk = best_dist_disk;
@@ -1819,6 +1814,11 @@ static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev)
 		WRITE_ONCE(p[conf->raid_disks].rdev, rdev);
 	}
 
+	if (!err && bdev_nonrot(rdev->bdev)) {
+		set_bit(Nonrot, &rdev->flags);
+		WRITE_ONCE(conf->nonrot_disks, conf->nonrot_disks + 1);
+	}
+
 	print_conf(conf);
 	return err;
 }
@@ -1883,6 +1883,9 @@ static int raid1_remove_disk(struct mddev *mddev, struct md_rdev *rdev)
 	}
 abort:
 
+	if (test_and_clear_bit(Nonrot, &rdev->flags))
+		WRITE_ONCE(conf->nonrot_disks, conf->nonrot_disks - 1);
+
 	print_conf(conf);
 	return err;
 }
diff --git a/drivers/md/raid1.h b/drivers/md/raid1.h
index 14d4211a123a..5300cbaa58a4 100644
--- a/drivers/md/raid1.h
+++ b/drivers/md/raid1.h
@@ -71,6 +71,7 @@ struct r1conf {
 						 * allow for replacements.
 						 */
 	int			raid_disks;
+	int			nonrot_disks;
 
 	spinlock_t		device_lock;
 
-- 
2.39.2