[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240227120327.1432511-7-yukuai1@huaweicloud.com>
Date: Tue, 27 Feb 2024 20:03:23 +0800
From: Yu Kuai <yukuai1@...weicloud.com>
To: xni@...hat.com,
paul.e.luse@...ux.intel.com,
song@...nel.org,
shli@...com,
neilb@...e.com
Cc: linux-raid@...r.kernel.org,
linux-kernel@...r.kernel.org,
yukuai3@...wei.com,
yukuai1@...weicloud.com,
yi.zhang@...wei.com,
yangerkun@...wei.com
Subject: [PATCH md-6.9 v2 06/10] md/raid1: factor out read_first_rdev() from read_balance()
From: Yu Kuai <yukuai3@...wei.com>
read_balance() is hard to understand because there are too many status
and branches, and it's overlong.
This patch factor out the case to read the first rdev from
read_balance(), there are no functional changes.
Co-developed-by: Paul Luse <paul.e.luse@...ux.intel.com>
Signed-off-by: Paul Luse <paul.e.luse@...ux.intel.com>
Signed-off-by: Yu Kuai <yukuai3@...wei.com>
Reviewed-by: Xiao Ni <xni@...hat.com>
---
drivers/md/raid1.c | 63 +++++++++++++++++++++++++++++++++-------------
1 file changed, 46 insertions(+), 17 deletions(-)
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 640d5d8f789a..3eeaef7f8ded 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -579,6 +579,47 @@ static sector_t align_to_barrier_unit_end(sector_t start_sector,
return len;
}
+static void update_read_sectors(struct r1conf *conf, int disk,
+ sector_t this_sector, int len)
+{
+ struct raid1_info *info = &conf->mirrors[disk];
+
+ atomic_inc(&info->rdev->nr_pending);
+ if (info->next_seq_sect != this_sector)
+ info->seq_start = this_sector;
+ info->next_seq_sect = this_sector + len;
+}
+
+static int choose_first_rdev(struct r1conf *conf, struct r1bio *r1_bio,
+ int *max_sectors)
+{
+ sector_t this_sector = r1_bio->sector;
+ int len = r1_bio->sectors;
+ int disk;
+
+ for (disk = 0 ; disk < conf->raid_disks * 2 ; disk++) {
+ struct md_rdev *rdev;
+ int read_len;
+
+ if (r1_bio->bios[disk] == IO_BLOCKED)
+ continue;
+
+ rdev = conf->mirrors[disk].rdev;
+ if (!rdev || test_bit(Faulty, &rdev->flags))
+ continue;
+
+ /* choose the first disk even if it has some bad blocks. */
+ read_len = raid1_check_read_range(rdev, this_sector, &len);
+ if (read_len > 0) {
+ update_read_sectors(conf, disk, this_sector, read_len);
+ *max_sectors = read_len;
+ return disk;
+ }
+ }
+
+ return -1;
+}
+
/*
* This routine returns the disk from which the requested read should
* be done. There is a per-array 'next expected sequential IO' sector
@@ -603,7 +644,6 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
sector_t best_dist;
unsigned int min_pending;
struct md_rdev *rdev;
- int choose_first;
retry:
sectors = r1_bio->sectors;
@@ -614,10 +654,11 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
best_pending_disk = -1;
min_pending = UINT_MAX;
best_good_sectors = 0;
- choose_first = raid1_should_read_first(conf->mddev, this_sector,
- sectors);
clear_bit(R1BIO_FailFast, &r1_bio->state);
+ if (raid1_should_read_first(conf->mddev, this_sector, sectors))
+ return choose_first_rdev(conf, r1_bio, max_sectors);
+
for (disk = 0 ; disk < conf->raid_disks * 2 ; disk++) {
sector_t dist;
sector_t first_bad;
@@ -663,8 +704,6 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
* bad_sectors from another device..
*/
bad_sectors -= (this_sector - first_bad);
- if (choose_first && sectors > bad_sectors)
- sectors = bad_sectors;
if (best_good_sectors > sectors)
best_good_sectors = sectors;
@@ -674,8 +713,6 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
best_good_sectors = good_sectors;
best_disk = disk;
}
- if (choose_first)
- break;
}
continue;
} else {
@@ -690,10 +727,6 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
pending = atomic_read(&rdev->nr_pending);
dist = abs(this_sector - conf->mirrors[disk].head_position);
- if (choose_first) {
- best_disk = disk;
- break;
- }
/* Don't change to another disk for sequential reads */
if (conf->mirrors[disk].next_seq_sect == this_sector
|| dist == 0) {
@@ -769,13 +802,9 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect
rdev = conf->mirrors[best_disk].rdev;
if (!rdev)
goto retry;
- atomic_inc(&rdev->nr_pending);
- sectors = best_good_sectors;
-
- if (conf->mirrors[best_disk].next_seq_sect != this_sector)
- conf->mirrors[best_disk].seq_start = this_sector;
- conf->mirrors[best_disk].next_seq_sect = this_sector + sectors;
+ sectors = best_good_sectors;
+ update_read_sectors(conf, disk, this_sector, sectors);
}
*max_sectors = sectors;
--
2.39.2
Powered by blists - more mailing lists