linux-kernel - [PATCH v2 28/30] MIPS: mobileye: eyeq5: add two GPIO bank nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240228-mbly-gpio-v2-28-3ba757474006@bootlin.com>
Date: Wed, 28 Feb 2024 12:28:26 +0100
From: Théo Lebrun <theo.lebrun@...tlin.com>
To: Linus Walleij <linus.walleij@...aro.org>, 
 Bartosz Golaszewski <brgl@...ev.pl>, Rob Herring <robh+dt@...nel.org>, 
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, 
 Conor Dooley <conor+dt@...nel.org>, Philipp Zabel <p.zabel@...gutronix.de>, 
 Thomas Bogendoerfer <tsbogend@...ha.franken.de>
Cc: linux-gpio@...r.kernel.org, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, 
 linux-mips@...r.kernel.org, Gregory CLEMENT <gregory.clement@...tlin.com>, 
 Vladimir Kondratiev <vladimir.kondratiev@...ileye.com>, 
 Thomas Petazzoni <thomas.petazzoni@...tlin.com>, 
 Tawfik Bayouk <tawfik.bayouk@...ileye.com>, 
 Théo Lebrun <theo.lebrun@...tlin.com>
Subject: [PATCH v2 28/30] MIPS: mobileye: eyeq5: add two GPIO bank nodes

This platform uses the same GPIO controller as Nomadik. It however has
its own pinconf & pinmux controller. EyeQ5 is the first platform to use
gpio-nomadik independently from pinctrl-nomadik.

Signed-off-by: Théo Lebrun <theo.lebrun@...tlin.com>
---
 arch/mips/boot/dts/mobileye/eyeq5.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
index 8d4f65ec912d..0f18ac73620b 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
+++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
@@ -158,6 +158,32 @@ timer {
 				clocks = <&core0_clk>;
 			};
 		};
+
+		gpio0: gpio@...0000 {
+			compatible = "mobileye,eyeq5-gpio";
+			reg = <0x0 0x1400000 0x0 0x1000>;
+			gpio-bank = <0>;
+			ngpios = <29>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 14 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@...0000 {
+			compatible = "mobileye,eyeq5-gpio";
+			reg = <0x0 0x1500000 0x0 0x1000>;
+			gpio-bank = <1>;
+			ngpios = <23>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 14 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 };
 

-- 
2.44.0