[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240228-mbly-gpio-v2-29-3ba757474006@bootlin.com>
Date: Wed, 28 Feb 2024 12:28:27 +0100
From: Théo Lebrun <theo.lebrun@...tlin.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Philipp Zabel <p.zabel@...gutronix.de>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>
Cc: linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mips@...r.kernel.org, Gregory CLEMENT <gregory.clement@...tlin.com>,
Vladimir Kondratiev <vladimir.kondratiev@...ileye.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Tawfik Bayouk <tawfik.bayouk@...ileye.com>,
Théo Lebrun <theo.lebrun@...tlin.com>
Subject: [PATCH v2 29/30] MIPS: mobileye: eyeq5: add resets to GPIO banks
The two GPIO banks share a single reset line.
Signed-off-by: Théo Lebrun <theo.lebrun@...tlin.com>
---
arch/mips/boot/dts/mobileye/eyeq5.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
index 0f18ac73620b..5f00d129c057 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
+++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
@@ -170,6 +170,7 @@ gpio0: gpio@...0000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ resets = <&reset 0 26>;
};
gpio1: gpio@...0000 {
@@ -183,6 +184,7 @@ gpio1: gpio@...0000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ resets = <&reset 0 26>;
};
};
};
--
2.44.0
Powered by blists - more mailing lists