| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <90d0cfd9b7d018e7332213f624f0f658@manjaro.org>
Date: Fri, 01 Mar 2024 07:14:03 +0100
From: Dragan Simic <dsimic@...jaro.org>
To: Alexey Charkov <alchark@...il.com>
Cc: Rob Herring <robh+dt@...nel.org>, Krzysztof Kozlowski
<krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>,
Heiko Stuebner <heiko@...ech.de>, Daniel Lezcano
<daniel.lezcano@...aro.org>, Viresh Kumar <viresh.kumar@...aro.org>, Chen-Yu
Tsai <wens@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-rockchip@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 1/5] arm64: dts: rockchip: enable built-in thermal
monitoring on RK3588
On 2024-03-01 06:20, Alexey Charkov wrote:
> On Fri, Mar 1, 2024 at 1:11 AM Dragan Simic <dsimic@...jaro.org> wrote:
>> Please see also some nitpicks below, which I forgot to mention in
>> my earlier response. I'm sorry for that.
>>
>> On 2024-02-29 20:26, Alexey Charkov wrote:
>> > Include thermal zones information in device tree for RK3588 variants.
>> >
>> > This also enables the TSADC controller unconditionally on all boards
>> > to ensure that thermal protections are in place via throttling and
>> > emergency reset, once OPPs are added to enable CPU DVFS.
>> >
>> > The default settings (using CRU as the emergency reset mechanism)
>> > should work on all boards regardless of their wiring, as CRU resets
>> > do not depend on any external components. Boards that have the TSHUT
>> > signal wired to the reset line of the PMIC may opt to switch to GPIO
>> > tshut mode instead (rockchip,hw-tshut-mode = <1>;)
>> >
>> > It seems though that downstream kernels don't use that, even for
>> > those boards where the wiring allows for GPIO based tshut, such as
>> > Radxa Rock 5B [1], [2], [3]
>> >
>> > [1]
>> > https://github.com/radxa/kernel/blob/stable-5.10-rock5/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts#L540
>> > [2]
>> > https://github.com/radxa/kernel/blob/stable-5.10-rock5/arch/arm64/boot/dts/rockchip/rk3588s.dtsi#L5433
>> > [3] https://dl.radxa.com/rock5/5b/docs/hw/radxa_rock_5b_v1423_sch.pdf
>> > page 11 (TSADC_SHUT_H)
>> >
>> > Signed-off-by: Alexey Charkov <alchark@...il.com>
>> > ---
>> > arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 176
>> > +++++++++++++++++++++++++++++-
>> > 1 file changed, 175 insertions(+), 1 deletion(-)
>> >
>> > diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
>> > b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
>> > index 36b1b7acfe6a..9bf197358642 100644
>> > --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
>> > +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
>> > @@ -10,6 +10,7 @@
>> > #include <dt-bindings/reset/rockchip,rk3588-cru.h>
>> > #include <dt-bindings/phy/phy.h>
>> > #include <dt-bindings/ata/ahci.h>
>> > +#include <dt-bindings/thermal/thermal.h>
>> >
>> > / {
>> > compatible = "rockchip,rk3588";
>> > @@ -2225,7 +2226,180 @@ tsadc: tsadc@...00000 {
>> > pinctrl-1 = <&tsadc_shut>;
>> > pinctrl-names = "gpio", "otpout";
>> > #thermal-sensor-cells = <1>;
>> > - status = "disabled";
>> > + status = "okay";
>> > + };
>> > +
>> > + thermal_zones: thermal-zones {
>> > + /* sensor near the center of the SoC */
>> > + package_thermal: package-thermal {
>> > + polling-delay-passive = <0>;
>> > + polling-delay = <0>;
>> > + thermal-sensors = <&tsadc 0>;
>> > +
>> > + trips {
>> > + package_crit: package-crit {
>> > + temperature = <115000>;
>> > + hysteresis = <0>;
>> > + type = "critical";
>> > + };
>> > + };
>> > + };
>> > +
>> > + /* sensor between A76 cores 0 and 1 */
>> > + bigcore0_thermal: bigcore0-thermal {
>> > + polling-delay-passive = <100>;
>> > + polling-delay = <0>;
>> > + thermal-sensors = <&tsadc 1>;
>> > +
>> > + trips {
>> > + /* threshold to start collecting temperature
>> > + * statistics e.g. with the IPA governor
>> > + */
>>
>> See, I'm not a native English speaker, but I've spent a lot of time
>> and effort improving my English skills. Thus, perhaps these comments
>> may or may not seem like unnecessary nitpicking, depending on how much
>> someone pays attention to writing style in general, but I'll risk to
>> be annoying and state these comments anyway. :)
>>
>> The comment above could be written in a much more condensed form like
>> this, which would also be a bit more accurate:
>>
>>
>> /* IPA threshold, when IPA governor is
>> used */
>>
>> IOW, we're writing all this for someone to read later, but we should
>> (and can) perfectly reasonably expect some already existing background
>> knowledge from the readers. In other words, we should be as concise
>> as possible.
>
> In fact, the power allocation governor code itself doesn't call those
> trips threshold or target as your suggested wording would imply.
> Instead, it calls them "switch on temperature" and "maximum desired
> temperature" [1]. Maybe we can call them that in the comments (and
> also avoid calling the governor IPA, because upstream code only calls
> it a "power allocator").
Hmm, but "IPA" is still mentioned in exactly three places in the files
under drivers/thermal. I think that warrants the use of "IPA", which
is also widely used pretty much everywhere.
Perhaps a win-win would be to have only the very first of the comments
like this, to introduce "IPA" as an acronym:
/* Power allocator (IPA) thermal
governor */
/* switch-on point, when IPA governor
is used */
Next, "the target temperature" is mentioned more than a few times in
drivers/thermal/gov_power_allocator.c, which I believe makes the use
of "IPA target" perfectly valid. Actually, let's use "IPA target
temperature", if you agree, to make it self descriptive.
Finally, the threshold... Based on
drivers/thermal/gov_power_allocator.c,
I think "IPA switch-on point" would be a good choice, which I already
used above in the proposed opening comment.
> [1]
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/thermal/gov_power_allocator.c#n483
>
>> > + bigcore0_alert0: bigcore0-alert0 {
>> > + temperature = <75000>;
>> > + hysteresis = <2000>;
>> > + type = "passive";
>> > + };
>> > + /* actual control temperature */
>>
>> Similarly to the above, I'd suggest this:
>>
>> /* IPA target, when IPA governor is
>> used */
>>
>> Having such brief comments should make it all perfectly understandable
>> to anyone who's already familiar with the way IPA governor works.
>> Everyone else should be welcome to read up a bit on IPA first.
>>
>> > + bigcore0_alert1: bigcore0-alert1 {
>> > + temperature = <85000>;
>> > + hysteresis = <2000>;
>> > + type = "passive";
>> > + };
>> > + bigcore0_crit: bigcore0-crit {
>> > + temperature = <115000>;
>> > + hysteresis = <0>;
>> > + type = "critical";
>> > + };
>> > + };
>> > + cooling-maps {
>> > + map0 {
>> > + trip = <&bigcore0_alert1>;
>> > + cooling-device =
>> > + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> > + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> > + };
>> > + };
>> > + };
>> > +
>> > + /* sensor between A76 cores 2 and 3 */
>> > + bigcore2_thermal: bigcore2-thermal {
>> > + polling-delay-passive = <100>;
>> > + polling-delay = <0>;
>> > + thermal-sensors = <&tsadc 2>;
>> > +
>> > + trips {
>> > + /* threshold to start collecting temperature
>> > + * statistics e.g. with the IPA governor
>> > + */
>>
>> The same as above.
>>
>> > + bigcore2_alert0: bigcore2-alert0 {
>> > + temperature = <75000>;
>> > + hysteresis = <2000>;
>> > + type = "passive";
>> > + };
>> > + /* actual control temperature */
>>
>> The same as above.
>>
>> > + bigcore2_alert1: bigcore2-alert1 {
>> > + temperature = <85000>;
>> > + hysteresis = <2000>;
>> > + type = "passive";
>> > + };
>> > + bigcore2_crit: bigcore2-crit {
>> > + temperature = <115000>;
>> > + hysteresis = <0>;
>> > + type = "critical";
>> > + };
>> > + };
>> > + cooling-maps {
>> > + map0 {
>> > + trip = <&bigcore2_alert1>;
>> > + cooling-device =
>> > + <&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> > + <&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> > + };
>> > + };
>> > + };
>> > +
>> > + /* sensor between the four A55 cores */
>> > + little_core_thermal: littlecore-thermal {
>> > + polling-delay-passive = <100>;
>> > + polling-delay = <0>;
>> > + thermal-sensors = <&tsadc 3>;
>> > +
>> > + trips {
>> > + /* threshold to start collecting temperature
>> > + * statistics e.g. with the IPA governor
>> > + */
>>
>> The same as above.
>>
>> > + littlecore_alert0: littlecore-alert0 {
>> > + temperature = <75000>;
>> > + hysteresis = <2000>;
>> > + type = "passive";
>> > + };
>> > + /* actual control temperature */
>>
>> The same as above.
>>
>> > + littlecore_alert1: littlecore-alert1 {
>> > + temperature = <85000>;
>> > + hysteresis = <2000>;
>> > + type = "passive";
>> > + };
>> > + littlecore_crit: littlecore-crit {
>> > + temperature = <115000>;
>> > + hysteresis = <0>;
>> > + type = "critical";
>> > + };
>> > + };
>> > + cooling-maps {
>> > + map0 {
>> > + trip = <&littlecore_alert1>;
>> > + cooling-device =
>> > + <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> > + <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> > + <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> > + <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> > + };
>> > + };
>> > + };
>> > +
>> > + /* sensor near the PD_CENTER power domain */
>> > + center_thermal: center-thermal {
>> > + polling-delay-passive = <0>;
>> > + polling-delay = <0>;
>> > + thermal-sensors = <&tsadc 4>;
>> > +
>> > + trips {
>> > + center_crit: center-crit {
>> > + temperature = <115000>;
>> > + hysteresis = <0>;
>> > + type = "critical";
>> > + };
>> > + };
>> > + };
>> > +
>> > + gpu_thermal: gpu-thermal {
>> > + polling-delay-passive = <0>;
>> > + polling-delay = <0>;
>> > + thermal-sensors = <&tsadc 5>;
>> > +
>> > + trips {
>> > + gpu_crit: gpu-crit {
>> > + temperature = <115000>;
>> > + hysteresis = <0>;
>> > + type = "critical";
>> > + };
>> > + };
>> > + };
>> > +
>> > + npu_thermal: npu-thermal {
>> > + polling-delay-passive = <0>;
>> > + polling-delay = <0>;
>> > + thermal-sensors = <&tsadc 6>;
>> > +
>> > + trips {
>> > + npu_crit: npu-crit {
>> > + temperature = <115000>;
>> > + hysteresis = <0>;
>> > + type = "critical";
>> > + };
>> > + };
>> > + };
>> > };
>> >
>> > saradc: adc@...10000 {
Powered by blists - more mailing lists