[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240301160508.GA190983@tpx1.home>
Date: Fri, 1 Mar 2024 17:05:08 +0100
From: Kamel Bouhara <kamel.bouhara@...tlin.com>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Henrik Rydberg <rydberg@...math.org>, linux-input@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
Marco Felsch <m.felsch@...gutronix.de>,
Jeff LaBundy <jeff@...undy.com>
Cc: catalin.popescu@...ca-geosystems.com, mark.satterthwaite@...chnetix.com,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Gregory Clement <gregory.clement@...tlin.com>,
bsp-development.geo@...ca-geosystems.com
Subject: Re: [PATCH v9 0/3] Input: Add TouchNetix axiom touchscreen driver
Le Fri, Mar 01, 2024 at 11:39:05AM +0100, Kamel Bouhara a écrit :
> Add a new driver for the TouchNetix's axiom family of touchscreen
> controller. This driver only support i2c and can be later adapted for
> SPI and USB support.
>
> Kamel Bouhara (3):
> dt-bindings: vendor-prefixes: Add TouchNetix AS
> dt-bindings: input: Add TouchNetix axiom touchscreen
> Input: Add TouchNetix axiom i2c touchscreen driver
>
> .../input/touchscreen/touchnetix,ax54a.yaml | 62 ++
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> MAINTAINERS | 7 +
> drivers/input/touchscreen/Kconfig | 12 +
> drivers/input/touchscreen/Makefile | 1 +
> drivers/input/touchscreen/touchnetix_axiom.c | 669 ++++++++++++++++++
> 6 files changed, 753 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/touchscreen/touchnetix,ax54a.yaml
> create mode 100644 drivers/input/touchscreen/touchnetix_axiom.c
>
> --
> 2.25.1
>
Above is the missing changelog:
Changes in v2:
- Add device tree binding documentation
- Move core functions in axiom_i2c as we only care about i2c support now
- Use static function when required
- Use syntax dev_err_probe()
- Add an hardware based reset
Changes in v3:
- Remove irq-gpios property in dt-binding
- Use a generic node name
- Fix issues reported in https://lore.kernel.org/oe-kbuild-all/202310100300.oAC2M62R-lkp@intel.com/
Changes in v4:
- Cleanup unused headers and macros
- Use standard kernel type
- Namespace structures and functions
- Use packed struct when possible to avoid bitfield operators
- Fix missing break when address is found in axiom_populate_target_address()
- Split reads in two steps for the reports, first length then report
itself so we only read required bytes
- Get poll-interval from devicetree
- Add VDDI/VDDA regulators
- Add a startup delay of 110 ms required after VDDA/VDDI is applied
- Remove axiom_i2c_write() as it is no more used
Changes in v5:
- Fix wrong message constructed in axiom_i2c_read
- Delay required between i2c reads is >= 250us
- Do not split report reading in two phases as we'll
have to wait 500us
- Use lower-case in properties names
- Make regulators properties are required in dt-binding
- Fix bug report: https://lore.kernel.org/lkml/202312051457.y3N1q3sZ-lkp@intel.com/
- Fix bug report: https://lore.kernel.org/lkml/6f8e3b64-5b21-4a50-8680-063ef7a93bdb@suswa.mountain/
Changes in v6:
- Fix missing unevaluatedProperties.in dt-binding
- Use __le16 to correctly deal with device endianness
- Use standart kernel types s/char/u8/
- Use regmap api as driver might support spi later
- Use get_unaligned_le16() for the sake of clarity
- Use devm_regulator_enable_optional()
Changes in v7:
- Remove startup time from dt-binding
- Fix usage table not correctly populated
Changes in v8:
- Fix missing call to input_report_slot_state()
- Fix issue reported in https://lore.kernel.org/oe-kbuild-all/202402020623.8T1Ah513-lkp@intel.com/
Changes in v9:
- Fix issue reported in https://lore.kernel.org/oe-kbuild-all/202402201157.BKo97uWl-lkp@intel.com/
- Rebase on v6.8-rc2
--
Kamel Bouhara, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
Powered by blists - more mailing lists