| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5761273.DvuYhMxLoT@steina-w>
Date: Mon, 04 Mar 2024 10:11:57 +0100
From: Alexander Stein <alexander.stein@...tq-group.com>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>, Sascha Hauer <s.hauer@...gutronix.de>, Pengutronix Kernel Team <kernel@...gutronix.de>, Fabio Estevam <festevam@...il.com>, linux-arm-kernel@...ts.infradead.org, Frank Li <Frank.Li@....com>
Cc: devicetree@...r.kernel.org, imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org, Dong Aisheng <aisheng.dong@....com>, Frank Li <Frank.Li@....com>
Subject: Re: [PATCH v2 1/4] arm64: dts: imx8: add cm40 subsystem dtsi
Hi Frank,
thanks for the update.
Am Samstag, 2. März 2024, 17:27:44 CET schrieb Frank Li:
> From: Dong Aisheng <aisheng.dong@....com>
>
> Add cm40 subsystem dtsi.
>
> Signed-off-by: Dong Aisheng <aisheng.dong@....com>
> Signed-off-by: Frank Li <Frank.Li@....com>
> ---
> arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi | 67 +++++++++++++++++++++++++
> arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 2 +
> arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 1 +
> 3 files changed, 70 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi
> new file mode 100644
> index 0000000000000..68043ab74e765
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi
> @@ -0,0 +1,67 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2019 NXP
> + * Dong Aisheng <aisheng.dong@....com>
> + */
> +
> +#include <dt-bindings/firmware/imx/rsrc.h>
> +
> +cm40_ipg_clk: clock-cm40-ipg {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <132000000>;
> + clock-output-names = "cm40_ipg_clk";
> +};
> +
> +cm40_subsys: bus@...00000 {
> + compatible = "simple-bus";
> + interrupt-parent = <&cm40_intmux>;
I would have put that below ranges, but it might be just personal preference.
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x34000000 0x0 0x34000000 0x4000000>;
> +
> + cm40_i2c: i2c@...30000 {
> + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
> + reg = <0x37230000 0x1000>;
> + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cm40_i2c_lpcg 0>,
> + <&cm40_i2c_lpcg 1>;
> + clock-names = "per", "ipg";
> + assigned-clocks = <&clk IMX_SC_R_M4_0_I2C IMX_SC_PM_CLK_PER>;
> + assigned-clock-rates = <24000000>;
> + power-domains = <&pd IMX_SC_R_M4_0_I2C>;
> + status = "disabled";
> + };
> +
> + cm40_intmux: intmux@...00000 {
> + compatible = "fsl,imx-intmux";
> + reg = <0x37400000 0x1000>;
> + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + interrupt-parent = <&gic>;
Please put this above interrupt property, you are mixing interrupt
properties of the device itself with interrupt-controller properties.
With these things addressed:
Reviewed-by: Alexander Stein <alexander.stein@...tq-group.com>
> + #interrupt-cells = <2>;
> + clocks = <&cm40_ipg_clk>;
> + clock-names = "ipg";
> + power-domains = <&pd IMX_SC_R_M4_0_INTMUX>;
> + status = "disabled";
> + };
> +
> + cm40_i2c_lpcg: clock-controller@...30000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x37630000 0x1000>;
> + #clock-cells = <1>;
> + clocks = <&clk IMX_SC_R_M4_0_I2C IMX_SC_PM_CLK_PER>,
> + <&cm40_ipg_clk>;
> + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> + clock-output-names = "cm40_lpcg_i2c_clk",
> + "cm40_lpcg_i2c_ipg_clk";
> + power-domains = <&pd IMX_SC_R_M4_0_I2C>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
> index a0674c5c55766..9d49c75a26222 100644
> --- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/clock/imx8-clock.h>
> #include <dt-bindings/dma/fsl-edma.h>
> +#include <dt-bindings/clock/imx8-lpcg.h>
> #include <dt-bindings/firmware/imx/rsrc.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -231,6 +232,7 @@ xtal24m: clock-xtal24m {
> };
>
> /* sorted in register address */
> + #include "imx8-ss-cm40.dtsi"
> #include "imx8-ss-adma.dtsi"
> #include "imx8-ss-conn.dtsi"
> #include "imx8-ss-ddr.dtsi"
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> index 10e16d84c0c3b..0313f295de2e9 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> @@ -317,6 +317,7 @@ map0 {
> /* sorted in register address */
> #include "imx8-ss-img.dtsi"
> #include "imx8-ss-vpu.dtsi"
> + #include "imx8-ss-cm40.dtsi"
> #include "imx8-ss-gpu0.dtsi"
> #include "imx8-ss-adma.dtsi"
> #include "imx8-ss-conn.dtsi"
>
>
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
Powered by blists - more mailing lists