lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240305133137.125020-1-jeremie.dautheribes@bootlin.com>
Date: Tue,  5 Mar 2024 14:31:37 +0100
From: Jérémie Dautheribes <jeremie.dautheribes@...tlin.com>
To: "David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Rob Herring <robh+dt@...nel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Andrew Davis <afd@...com>,
	Andrew Lunn <andrew@...n.ch>
Cc: netdev@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
	Yen-Mei Goh <yen-mei.goh@...sight.com>,
	Miquèl Raynal <miquel.raynal@...tlin.com>,
	Jérémie Dautheribes <jeremie.dautheribes@...tlin.com>
Subject: [PATCH 1/1] dt-bindings: net: dp83822: change ti,rmii-mode description

Drop reference to the 25MHz clock as it has nothing to do with connecting
the PHY and the MAC.
Add info about the reference clock direction between the PHY and the MAC
as it depends on the selected rmii mode.

Suggested-by: Andrew Lunn <andrew@...n.ch>
Signed-off-by: Jérémie Dautheribes <jeremie.dautheribes@...tlin.com>
---
This patch follows on from my previous patch series [1] which has already been 
merged into the net-next tree and which added the "ti,rmii-mode" property.
As suggested by Andrew Lunn, this patch updates the description of this 
property to make it more consistent with the master/slave relationship it 
conveys.

[1] https://lore.kernel.org/all/20240222103117.526955-1-jeremie.dautheribes@bootlin.com/

 Documentation/devicetree/bindings/net/ti,dp83822.yaml | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/ti,dp83822.yaml b/Documentation/devicetree/bindings/net/ti,dp83822.yaml
index 8f23254c0458..784866ea392b 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83822.yaml
+++ b/Documentation/devicetree/bindings/net/ti,dp83822.yaml
@@ -84,10 +84,10 @@ properties:
     description: |
        If present, select the RMII operation mode. Two modes are
        available:
-         - RMII master, where the PHY operates from a 25MHz clock reference,
-         provided by a crystal or a CMOS-level oscillator
-         - RMII slave, where the PHY operates from a 50MHz clock reference,
-         provided by a CMOS-level oscillator
+         - RMII master, where the PHY outputs a 50MHz reference clock which can
+         be connected to the MAC.
+         - RMII slave, where the PHY expects a 50MHz reference clock input
+         shared with the MAC.
        The RMII operation mode can also be configured by its straps.
        If the strap pin is not set correctly or not set at all, then this can be
        used to configure it.
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ