| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <6040170.44csPzL39Z@diego>
Date: Tue, 05 Mar 2024 21:20:55 +0100
From: Heiko Stübner <heiko@...ech.de>
To: Shreeya Patel <shreeya.patel@...labora.com>
Cc: mchehab@...nel.org, robh@...nel.org, krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org, mturquette@...libre.com, sboyd@...nel.org,
p.zabel@...gutronix.de, jose.abreu@...opsys.com, nelson.costa@...opsys.com,
dmitry.osipenko@...labora.com, sebastian.reichel@...labora.com,
shawn.wen@...k-chips.com, nicolas.dufresne@...labora.com, hverkuil@...all.nl,
hverkuil-cisco@...all.nl, kernel@...labora.com, linux-kernel@...r.kernel.org,
linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-rockchip@...ts.infradead.org,
linux-clk@...r.kernel.org, linux-arm@...ts.infradead.org
Subject:
Re: [PATCH v2 4/6] arm64: dts: rockchip: Add device tree support for HDMI RX
Controller
Hi again :-)
Am Dienstag, 5. März 2024, 20:05:02 CET schrieb Shreeya Patel:
> On Tuesday, March 05, 2024 19:41 IST, Heiko Stübner <heiko@...ech.de> wrote:
> > Am Dienstag, 5. März 2024, 13:36:46 CET schrieb Shreeya Patel:
> > > Add device tree support for Synopsys DesignWare HDMI RX
> > > Controller.
> > >
> > > Reviewed-by: Dmitry Osipenko <dmitry.osipenko@...labora.com>
> > > Tested-by: Dmitry Osipenko <dmitry.osipenko@...labora.com>
> > > Co-developed-by: Dingxian Wen <shawn.wen@...k-chips.com>
> > > Signed-off-by: Dingxian Wen <shawn.wen@...k-chips.com>
> > > Signed-off-by: Shreeya Patel <shreeya.patel@...labora.com>
> > > ---
> > > Changes in v2 :-
> > > - Fix some of the checkpatch errors and warnings
> > > - Rename resets, vo1-grf and HPD
> > > - Move hdmirx_cma node to the rk3588.dtsi file
> > >
> > > .../boot/dts/rockchip/rk3588-pinctrl.dtsi | 41 ++++++++++++++
> > > arch/arm64/boot/dts/rockchip/rk3588.dtsi | 55 +++++++++++++++++++
> > > 2 files changed, 96 insertions(+)
> >
> > > diff --git a/arch/arm64/boot/dts/rockchip/rk3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
> > > index 5519c1430cb7..8adb98b99701 100644
> > > --- a/arch/arm64/boot/dts/rockchip/rk3588.dtsi
> > > +++ b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
> > > @@ -7,6 +7,24 @@
> > > #include "rk3588-pinctrl.dtsi"
> > >
> > > / {
> > > + reserved-memory {
> > > + #address-cells = <2>;
> > > + #size-cells = <2>;
> > > + ranges;
> >
> > add blank line here
> >
> > > + /*
> > > + * The 4k HDMI capture controller works only with 32bit
> > > + * phys addresses and doesn't support IOMMU. HDMI RX CMA
> > > + * must be reserved below 4GB.
> > > + */
> > > + hdmirx_cma: hdmirx_cma {
> >
> > phandles use "_", but node-names "-"
> >
> > > + compatible = "shared-dma-pool";
> > > + alloc-ranges = <0x0 0x0 0x0 0xffffffff>;
> > > + size = <0x0 (160 * 0x100000)>; /* 160MiB */
> >
> > The comment above that node, could elaborate where the value of 160MB
> > originates from. I assume it is to hold n-times of 4K frames or whatever,
> > but it would be helpful for people to be able to read that.
> >
>
> right, we did the following calculation to come up with this value :-
> 3840 * 2160 * 4 (bytes/pix) * 2 (frames/buffer) / 1000 / 1000 = 66M
> and then we do the 2x times of this value to be on the safer side
> and support all practical use-cases.
>
> I'll add some more details to the comment in v3.
thanks, that will be helpful for me and everybody reading the dts later on
>
> >
> > > + no-map;
> > > + status = "disabled";
> > > + };
> > > + };
> > > +
> > > pcie30_phy_grf: syscon@...b8000 {
> > > compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon";
> > > reg = <0x0 0xfd5b8000 0x0 0x10000>;
> > > @@ -85,6 +103,38 @@ i2s10_8ch: i2s@...00000 {
> > > status = "disabled";
> > > };
> > >
> > > + hdmi_receiver: hdmi-receiver@...e0000 {
> >
> > Maybe rename the label to "hdmirx:" ... that way in a board enabling the
> > cma region, both nodes would stay close to each other?
> >
>
> Umm we already have receiver in the name so I am not sure if adding rx will be
> a good idea. I was trying to keep it consistent with the names used in other device tree files.
> In case you still feel otherwise then do let me know, I'll make the change.
I'm somewhat partial to the actual name, I was more getting at similar
names to keep things together.
General sorting rules are that &foo phandles are sorted alphabetically
in board devicetrees.
So having
&hdmirx {
status = "okay";
};
&hdmirx_cma {
status = "okay";
};
in the board dt, makes them stay together automatically ;-)
So if it's hdmirx + hdmirx_cma or hdmi_receiver + hdmi_receiver_cma
doesn't matter that much, just that they share a common basename.
I really want to stay away from allowing special rules for things as much
as possible, because that becomes a neverending story, so it's
alphabetical sorting.
But nothing prevents us from naming phandles in an intelligent way ;-) .
Thanks
Heiko
> > > + compatible = "rockchip,rk3588-hdmirx-ctrler", "snps,dw-hdmi-rx";
> > > + reg = <0x0 0xfdee0000 0x0 0x6000>;
> > > + power-domains = <&power RK3588_PD_VO1>;
> > > + rockchip,grf = <&sys_grf>;
> > > + rockchip,vo1-grf = <&vo1_grf>;
> > > + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH 0>,
> > > + <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH 0>,
> > > + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH 0>;
> > > + interrupt-names = "cec", "hdmi", "dma";
> > > + clocks = <&cru ACLK_HDMIRX>,
> > > + <&cru CLK_HDMIRX_AUD>,
> > > + <&cru CLK_CR_PARA>,
> > > + <&cru PCLK_HDMIRX>,
> > > + <&cru CLK_HDMIRX_REF>,
> > > + <&cru PCLK_S_HDMIRX>,
> > > + <&cru HCLK_VO1>;
> > > + clock-names = "aclk",
> > > + "audio",
> > > + "cr_para",
> > > + "pclk",
> > > + "ref",
> > > + "hclk_s_hdmirx",
> > > + "hclk_vo1";
> >
> > the driver uses of_reserved_mem_device_init(), so doesn't this node need
> > a "memory-region = <&hdmirx_cma>; or similar?
> >
>
> yes, we should have the memory-region property here. My bad, I'll correct this in v3.
>
> >
> > > + resets = <&cru SRST_A_HDMIRX>, <&cru SRST_P_HDMIRX>,
> > > + <&cru SRST_HDMIRX_REF>, <&cru SRST_A_HDMIRX_BIU>;
> > > + reset-names = "axi", "apb", "ref", "biu";
> > > + pinctrl-0 = <&hdmim1_rx>;
> > > + pinctrl-names = "default";
> > > + status = "disabled";
> > > + };
> > > +
> > > pcie3x4: pcie@...50000 {
> > > compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
> > > #address-cells = <3>;
> > > @@ -339,3 +389,8 @@ pcie30phy: phy@...80000 {
> > > status = "disabled";
> > > };
> > > };
> > > +
> > > +&hdmirx_cma {
> > > + status = "okay";
> > > +};
> >
> > I'd assume a board that enables &hdmi_receiver would also enable hdmirx_cma
> > and not the soc dtsi for _all_ boards?
> >
>
> Actually this node should be in the rock-5b.dts file instead of here.
> v1 had it correct but I made a mistake in v2 :(
> Thanks for pointing this out, I'll fix this and send a v3 soon.
Powered by blists - more mailing lists