linux-kernel - Re: [PATCH v5 1/1] arm64: dts: qcom: ipq6018: add sdhci node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAOX2RU4W-zV3A8eW0A+1V838Fm=tUkXY=Bs3j4VJ8Jo9mxrOAw@mail.gmail.com>
Date: Thu, 7 Mar 2024 08:38:32 +0100
From: Robert Marko <robimarko@...il.com>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Cc: Chukun Pan <amadeus@....edu.cn>, Bjorn Andersson <andersson@...nel.org>, 
	Konrad Dybcio <konrad.dybcio@...aro.org>, 
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>, 
	Rob Herring <robh@...nel.org>, linux-arm-msm@...r.kernel.org, 
	linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH v5 1/1] arm64: dts: qcom: ipq6018: add sdhci node

On Thu, 7 Mar 2024 at 08:28, Dmitry Baryshkov
<dmitry.baryshkov@...aro.org> wrote:
>
> On Wed, 6 Mar 2024 at 22:35, Robert Marko <robimarko@...il.com> wrote:
> >
> >
> > On 06. 03. 2024. 20:43, Dmitry Baryshkov wrote:
> > > On Wed, 6 Mar 2024 at 14:31, Chukun Pan <amadeus@....edu.cn> wrote:
> > >> Add node to support mmc controller inside of IPQ6018.
> > >> This controller supports both eMMC and SD cards.
> > >>
> > >> Tested with:
> > >>    eMMC (HS200)
> > >>    SD Card (SDR50/SDR104)
> > >>
> > >> Signed-off-by: Chukun Pan <amadeus@....edu.cn>
> > >> ---
> > >>   arch/arm64/boot/dts/qcom/ipq6018.dtsi | 19 +++++++++++++++++++
> > >>   1 file changed, 19 insertions(+)
> > >>
> > >> diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> > >> index 322eced0b876..420c192bccd9 100644
> > >> --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> > >> +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> > >> @@ -441,6 +441,25 @@ dwc_1: usb@...0000 {
> > >>                          };
> > >>                  };
> > >>
> > >> +               sdhc: mmc@...4000 {
> > >> +                       compatible = "qcom,ipq6018-sdhci", "qcom,sdhci-msm-v5";
> > >> +                       reg = <0x0 0x07804000 0x0 0x1000>,
> > >> +                             <0x0 0x07805000 0x0 0x1000>;
> > >> +                       reg-names = "hc", "cqhci";
> > >> +
> > >> +                       interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> > >> +                                    <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> > >> +                       interrupt-names = "hc_irq", "pwr_irq";
> > >> +
> > >> +                       clocks = <&gcc GCC_SDCC1_AHB_CLK>,
> > >> +                                <&gcc GCC_SDCC1_APPS_CLK>,
> > >> +                                <&xo>;
> > >> +                       clock-names = "iface", "core", "xo";
> > >> +                       resets = <&gcc GCC_SDCC1_BCR>;
> > >> +                       max-frequency = <192000000>;
> > > If I understand correctly, GCC_SDCC1_APPS_CLK support frequencies up
> > > to 384 MHz, but here you are limiting it to 192 MHz. Why is it so?
> > >
> > > I am not sure that 384MHz is actually supported as IPQ6018 datasheet
> > > clearly indicates that HS400 mode is not supported.
>
> I didn't check the datasheet, I opened the gcc-ipq6018.c

I understand that, I just pointed it out, it wouldn't surprise me if
the frequency table
was just copy/pasted from IPQ8074.

Regards,
Robert
>
> > >
> > > Regards,
> > > Robert
> > >
> > >> +                       status = "disabled";
> > >> +               };
> > >> +
> > >>                  blsp_dma: dma-controller@...4000 {
> > >>                          compatible = "qcom,bam-v1.7.0";
> > >>                          reg = <0x0 0x07884000 0x0 0x2b000>;
> > >> --
> > >> 2.25.1
> > >>
> > >>
> > >
>
>
>
> --
> With best wishes
> Dmitry