| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZemOKZAWuIY1hcpU@ryzen>
Date: Thu, 7 Mar 2024 10:51:37 +0100
From: Niklas Cassel <cassel@...nel.org>
To: Igor Pylypiv <ipylypiv@...gle.com>
Cc: Damien Le Moal <dlemoal@...nel.org>, Hannes Reinecke <hare@...e.de>,
John Garry <john.g.garry@...cle.com>,
Jason Yan <yanaijie@...wei.com>,
"James E.J. Bottomley" <jejb@...ux.ibm.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
Jack Wang <jinpu.wang@...ud.ionos.com>,
Xiang Chen <chenxiang66@...ilicon.com>,
Artur Paszkiewicz <artur.paszkiewicz@...el.com>,
Bart Van Assche <bvanassche@....org>,
TJ Adams <tadamsjr@...gle.com>, linux-ide@...r.kernel.org,
linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v7 2/7] scsi: libsas: Define NCQ Priority sysfs
attributes for SATA devices
On Wed, Mar 06, 2024 at 11:28:42AM -0800, Igor Pylypiv wrote:
> On Wed, Mar 06, 2024 at 11:54:52AM +0100, Niklas Cassel wrote:
> > On Tue, Mar 05, 2024 at 05:22:21PM -0800, Igor Pylypiv wrote:
> > > Libata sysfs attributes cannot be used for libsas managed SATA devices
> > > because the ata_port location is different for libsas.
> > >
> > > Defined sysfs attributes (visible for SATA devices only):
> > > - /sys/block/sda/device/ncq_prio_enable
> > > - /sys/block/sda/device/ncq_prio_supported
> > >
> > > The newly defined attributes will pass the correct ata_port to libata
> > > helper functions.
> > >
> > > Reviewed-by: John Garry <john.g.garry@...cle.com>
> > > Reviewed-by: Damien Le Moal <dlemoal@...nel.org>
> > > Reviewed-by: Jason Yan <yanaijie@...wei.com>
> > > Signed-off-by: Igor Pylypiv <ipylypiv@...gle.com>
> > > ---
> > > drivers/scsi/libsas/sas_ata.c | 94 +++++++++++++++++++++++++++++++++++
> > > include/scsi/sas_ata.h | 6 +++
> > > 2 files changed, 100 insertions(+)
> > >
> > > diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
> > > index 12e2653846e3..04b0bd9a4e01 100644
> > > --- a/drivers/scsi/libsas/sas_ata.c
> > > +++ b/drivers/scsi/libsas/sas_ata.c
> > > @@ -964,3 +964,97 @@ int sas_execute_ata_cmd(struct domain_device *device, u8 *fis, int force_phy_id)
> > > force_phy_id, &tmf_task);
> > > }
> > > EXPORT_SYMBOL_GPL(sas_execute_ata_cmd);
> > > +
> > > +static ssize_t sas_ncq_prio_supported_show(struct device *device,
> > > + struct device_attribute *attr,
> > > + char *buf)
> > > +{
> > > + struct scsi_device *sdev = to_scsi_device(device);
> > > + struct domain_device *ddev = sdev_to_domain_dev(sdev);
> > > + bool supported;
> > > + int rc;
> > > +
> > > + /* This attribute shall be visible for SATA devices only */
> > > + if (WARN_ON_ONCE(!dev_is_sata(ddev)))
> > > + return -EINVAL;
> >
> > Like Hannes commented, I don't believe this is needed.
> >
>
> The intention for the check is to serve as a fail-safe in case 'is_visible()'
> callback gets incorrectly modified and stops hiding the sysfs attributes
> for non-SATA devices.
>
> Just want to clarify should I remove the WARN_ON_ONCE and keep the fail-safe
> check or should I get rid of the check completely and trust 'is_visible()'
> to always hide the sysfs attributes for non-SATA devices?
I think that you can remove both the WARN_ON_ONCE and the
if (!dev_is_sata()).
We usually don't keep code around "just in case someone modifies some
other function sometime in the future".
If someone changes is_visible() to remove the dev_is_sata() check,
then they would introuce a bug. I don't see why anyone would change that,
but if someone tried to remove that check from is_visible() anyway,
I'm assuming that someone would catch it during code review.
>
> >
> > > +
> > > + rc = ata_ncq_prio_supported(ddev->sata_dev.ap, sdev, &supported);
> > > + if (rc)
> > > + return rc;
> > > +
> > > + return sysfs_emit(buf, "%d\n", supported);
> > > +}
> > > +
> >
> > While this is a bit different depending on file, the most common way is to
> > have no blank link before the DEVICE_ATTR().
> >
>
> In "[PATCH 1/3] ata: libata-sata: Factor out NCQ Priority configuration helpers"
> Damien asked to keep the blank link before the DEVICE_ATTR() in libata-sata.c.
>
> Non-prio sysfs attributes in libata-sata.c don't have blank lines
> before DEVICE_ATTR() so I'm more inclined to remove the lines.
>
> I'm fine with either of ways, just want to get a consensus and make it
> consistent for both libata-sata.c and sas_ata.c.
While it is a bit different depending on file, it is slightly more common
to no have a extra blank line before DEVICE_ATTR():
$ git grep -B 1 DEVICE_ATTR | grep "}" | wc -l
2167
$ git grep -B 1 DEVICE_ATTR | grep -- "c-$" | wc -l
1725
But I'm fine to keep it like it is, especially if Damien already had expresed
a preference.
Kind regards,
Niklas
>
> >
> > > +DEVICE_ATTR(ncq_prio_supported, S_IRUGO, sas_ncq_prio_supported_show, NULL);
> > > +
> > > +static ssize_t sas_ncq_prio_enable_show(struct device *device,
> > > + struct device_attribute *attr,
> > > + char *buf)
> > > +{
> > > + struct scsi_device *sdev = to_scsi_device(device);
> > > + struct domain_device *ddev = sdev_to_domain_dev(sdev);
> > > + bool enabled;
> > > + int rc;
> > > +
> > > + /* This attribute shall be visible for SATA devices only */
> > > + if (WARN_ON_ONCE(!dev_is_sata(ddev)))
> > > + return -EINVAL;
> > > +
> > > + rc = ata_ncq_prio_enabled(ddev->sata_dev.ap, sdev, &enabled);
> > > + if (rc)
> > > + return rc;
> > > +
> > > + return sysfs_emit(buf, "%d\n", enabled);
> > > +}
> > > +
> > > +static ssize_t sas_ncq_prio_enable_store(struct device *device,
> > > + struct device_attribute *attr,
> > > + const char *buf, size_t len)
> > > +{
> > > + struct scsi_device *sdev = to_scsi_device(device);
> > > + struct domain_device *ddev = sdev_to_domain_dev(sdev);
> > > + bool enable;
> > > + int rc;
> > > +
> > > + /* This attribute shall be visible for SATA devices only */
> > > + if (WARN_ON_ONCE(!dev_is_sata(ddev)))
> > > + return -EINVAL;
> > > +
> > > + rc = kstrtobool(buf, &enable);
> > > + if (rc)
> > > + return rc;
> > > +
> > > + rc = ata_ncq_prio_enable(ddev->sata_dev.ap, sdev, enable);
> > > + if (rc)
> > > + return rc;
> > > +
> > > + return len;
> > > +}
> > > +
> > > +DEVICE_ATTR(ncq_prio_enable, S_IRUGO | S_IWUSR,
> > > + sas_ncq_prio_enable_show, sas_ncq_prio_enable_store);
> > > +
> > > +static struct attribute *sas_ata_sdev_attrs[] = {
> > > + &dev_attr_ncq_prio_supported.attr,
> > > + &dev_attr_ncq_prio_enable.attr,
> > > + NULL
> > > +};
> > > +
> > > +static umode_t sas_ata_attr_is_visible(struct kobject *kobj,
> > > + struct attribute *attr, int i)
> > > +{
> > > + struct device *dev = kobj_to_dev(kobj);
> > > + struct scsi_device *sdev = to_scsi_device(dev);
> > > + struct domain_device *ddev = sdev_to_domain_dev(sdev);
> > > +
> > > + if (!dev_is_sata(ddev))
> > > + return 0;
> > > +
> > > + return attr->mode;
> > > +}
> > > +
> > > +const struct attribute_group sas_ata_sdev_attr_group = {
> > > + .attrs = sas_ata_sdev_attrs,
> > > + .is_visible = sas_ata_attr_is_visible,
> > > +};
> > > +EXPORT_SYMBOL_GPL(sas_ata_sdev_attr_group);
> > > diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h
> > > index 2f8c719840a6..92e27e7bf088 100644
> > > --- a/include/scsi/sas_ata.h
> > > +++ b/include/scsi/sas_ata.h
> > > @@ -39,6 +39,9 @@ int smp_ata_check_ready_type(struct ata_link *link);
> > > int sas_discover_sata(struct domain_device *dev);
> > > int sas_ata_add_dev(struct domain_device *parent, struct ex_phy *phy,
> > > struct domain_device *child, int phy_id);
> > > +
> > > +extern const struct attribute_group sas_ata_sdev_attr_group;
> > > +
> > > #else
> > >
> > > static inline void sas_ata_disabled_notice(void)
> > > @@ -123,6 +126,9 @@ static inline int sas_ata_add_dev(struct domain_device *parent, struct ex_phy *p
> > > sas_ata_disabled_notice();
> > > return -ENODEV;
> > > }
> > > +
> > > +#define sas_ata_sdev_attr_group ((struct attribute_group) {})
> > > +
> > > #endif
> > >
> > > #endif /* _SAS_ATA_H_ */
> > > --
> > > 2.44.0.278.ge034bb2e1d-goog
> > >
Powered by blists - more mailing lists