Message-ID: <CAP-5=fWc5ZJaiR_tS8RHPxcdAPST61CYUS_9Qvc2ztzBUETQbg@mail.gmail.com>
Date: Mon, 11 Mar 2024 11:46:24 -0700
From: Ian Rogers <irogers@...gle.com>
To: Sandipan Das <sandipan.das@....com>
Cc: linux-perf-users@...r.kernel.org, linux-kernel@...r.kernel.org, 
	peterz@...radead.org, mingo@...hat.com, acme@...nel.org, namhyung@...nel.org, 
	mark.rutland@....com, alexander.shishkin@...ux.intel.com, jolsa@...nel.org, 
	adrian.hunter@...el.com, eranian@...gle.com, ravi.bangoria@....com, 
	ananth.narayan@....com
Subject: Re: [PATCH 3/4] perf vendor events amd: Add Zen 5 metrics

On Sun, Mar 10, 2024 at 10:24 PM Sandipan Das <sandipan.das@....com> wrote:
>
> Add metrics taken from Section 1.2 "Performance Measurement" of the
> Performance Monitor Counters for AMD Family 1Ah Model 00h-0Fh Processors
> document available at the link below.
>
> The recommended metrics are sourced from Table 1 "Guidance for Common
> Performance Statistics with Complex Event Selects".
>
> The pipeline utilization metrics are sourced from Table 2 "Guidance
> for Pipeline Utilization Analysis Statistics". These are useful for
> finding performance bottlenecks by analyzing activity at different
> stages of the pipeline. There are metric groups available for Level 1
> and Level 2 analysis.
>
> Link: https://bugzilla.kernel.org/attachment.cgi?id=305974
> Signed-off-by: Sandipan Das <sandipan.das@....com>

Could you consider reviewing:
https://lore.kernel.org/lkml/20240301184737.2660108-1-irogers@google.com/

> ---
>  .../pmu-events/arch/x86/amdzen5/pipeline.json |  98 +++++
>  .../arch/x86/amdzen5/recommended.json         | 357 ++++++++++++++++++
>  2 files changed, 455 insertions(+)
>  create mode 100644 tools/perf/pmu-events/arch/x86/amdzen5/pipeline.json
>  create mode 100644 tools/perf/pmu-events/arch/x86/amdzen5/recommended.json
>
> diff --git a/tools/perf/pmu-events/arch/x86/amdzen5/pipeline.json b/tools/perf/pmu-events/arch/x86/amdzen5/pipeline.json
> new file mode 100644
> index 000000000000..36dc76b793ae
> --- /dev/null
> +++ b/tools/perf/pmu-events/arch/x86/amdzen5/pipeline.json
> @@ -0,0 +1,98 @@
> +[
> +  {
> +    "MetricName": "total_dispatch_slots",
> +    "BriefDescription": "Total dispatch slots (up to 8 instructions can be dispatched in each cycle).",
> +    "MetricExpr": "8 * ls_not_halted_cyc"

Should the unit be slots?

> +  },
> +  {
> +    "MetricName": "frontend_bound",
> +    "BriefDescription": "Fraction of dispatch slots that remained unused because the frontend did not supply enough instructions/ops.",

Given the output is in percent, is fraction an accurate description?
Wouldn't "percentage" be better? This issue repeats below, but I'll
just highlight the first instance.

> +    "MetricExpr": "d_ratio(de_no_dispatch_per_slot.no_ops_from_frontend, total_dispatch_slots)",
> +    "MetricGroup": "PipelineL1",
> +    "ScaleUnit": "100%"

Perhaps "100% slots" ?

> +  },
> +  {
> +    "MetricName": "bad_speculation",
> +    "BriefDescription": "Fraction of dispatched ops that did not retire.",
> +    "MetricExpr": "d_ratio(de_src_op_disp.all - ex_ret_ops, total_dispatch_slots)",
> +    "MetricGroup": "PipelineL1",
> +    "ScaleUnit": "100%"

Perhaps "100% ops"

> +  },
> +  {
> +    "MetricName": "backend_bound",
> +    "BriefDescription": "Fraction of dispatch slots that remained unused because of backend stalls.",
> +    "MetricExpr": "d_ratio(de_no_dispatch_per_slot.backend_stalls, total_dispatch_slots)",
> +    "MetricGroup": "PipelineL1",
> +    "ScaleUnit": "100%"

Perhaps "100% slots"

> +  },
> +  {
> +    "MetricName": "smt_contention",
> +    "BriefDescription": "Fraction of dispatch slots that remained unused because the other thread was selected.",
> +    "MetricExpr": "d_ratio(de_no_dispatch_per_slot.smt_contention, total_dispatch_slots)",
> +    "MetricGroup": "PipelineL1",
> +    "ScaleUnit": "100%"

Perhaps "100% slots"

> +  },
> +  {
> +    "MetricName": "retiring",
> +    "BriefDescription": "Fraction of dispatch slots used by ops that retired.",
> +    "MetricExpr": "d_ratio(ex_ret_ops, total_dispatch_slots)",
> +    "MetricGroup": "PipelineL1",
> +    "ScaleUnit": "100%"

Perhaps "100% slots"

> +  },
> +  {
> +    "MetricName": "frontend_bound_latency",
> +    "BriefDescription": "Fraction of dispatch slots that remained unused because of a latency bottleneck in the frontend (such as instruction cache or TLB misses).",
> +    "MetricExpr": "d_ratio((8 * cpu@...no_dispatch_per_slot.no_ops_from_frontend\\,cmask\\=0x8@), total_dispatch_slots)",
> +    "MetricGroup": "PipelineL2;frontend_bound_group",
> +    "ScaleUnit": "100%"

Perhaps "100% slots"

> +  },
> +  {
> +    "MetricName": "frontend_bound_bandwidth",
> +    "BriefDescription": "Fraction of dispatch slots that remained unused because of a bandwidth bottleneck in the frontend (such as decode or op cache fetch bandwidth).",
> +    "MetricExpr": "d_ratio(de_no_dispatch_per_slot.no_ops_from_frontend - (8 * cpu@...no_dispatch_per_slot.no_ops_from_frontend\\,cmask\\=0x8@), total_dispatch_slots)",
> +    "MetricGroup": "PipelineL2;frontend_bound_group",
> +    "ScaleUnit": "100%"

Perhaps "100% slots"

It seems unexpected that a latency (above) and  bandwidth metric would
be reporting a percentage, perhaps this needs capturing in the metric
name.

Same issues repeat below...

> +  },
> +  {
> +    "MetricName": "bad_speculation_mispredicts",
> +    "BriefDescription": "Fraction of dispatched ops that were flushed due to branch mispredicts.",
> +    "MetricExpr": "d_ratio(bad_speculation * ex_ret_brn_misp, ex_ret_brn_misp + bp_redirects.resync)",
> +    "MetricGroup": "PipelineL2;bad_speculation_group",
> +    "ScaleUnit": "100%"
> +  },
> +  {
> +    "MetricName": "bad_speculation_pipeline_restarts",
> +    "BriefDescription": "Fraction of dispatched ops that were flushed due to pipeline restarts (resyncs).",
> +    "MetricExpr": "d_ratio(bad_speculation * bp_redirects.resync, ex_ret_brn_misp + bp_redirects.resync)",
> +    "MetricGroup": "PipelineL2;bad_speculation_group",
> +    "ScaleUnit": "100%"
> +  },
> +  {
> +    "MetricName": "backend_bound_memory",
> +    "BriefDescription": "Fraction of dispatch slots that remained unused because of stalls due to the memory subsystem.",
> +    "MetricExpr": "backend_bound * d_ratio(ex_no_retire.load_not_complete, ex_no_retire.not_complete)",
> +    "MetricGroup": "PipelineL2;backend_bound_group",
> +    "ScaleUnit": "100%"
> +  },
> +  {
> +    "MetricName": "backend_bound_cpu",
> +    "BriefDescription": "Fraction of dispatch slots that remained unused because of stalls not related to the memory subsystem.",
> +    "MetricExpr": "backend_bound * (1 - d_ratio(ex_no_retire.load_not_complete, ex_no_retire.not_complete))",
> +    "MetricGroup": "PipelineL2;backend_bound_group",
> +    "ScaleUnit": "100%"
> +  },
> +  {
> +    "MetricName": "retiring_fastpath",
> +    "BriefDescription": "Fraction of dispatch slots used by fastpath ops that retired.",
> +    "MetricExpr": "retiring * (1 - d_ratio(ex_ret_ucode_ops, ex_ret_ops))",
> +    "MetricGroup": "PipelineL2;retiring_group",
> +    "ScaleUnit": "100%"
> +  },
> +  {
> +    "MetricName": "retiring_microcode",
> +    "BriefDescription": "Fraction of dispatch slots used by microcode ops that retired.",
> +    "MetricExpr": "retiring * d_ratio(ex_ret_ucode_ops, ex_ret_ops)",
> +    "MetricGroup": "PipelineL2;retiring_group",
> +    "ScaleUnit": "100%"
> +  }
> +]
> diff --git a/tools/perf/pmu-events/arch/x86/amdzen5/recommended.json b/tools/perf/pmu-events/arch/x86/amdzen5/recommended.json
> new file mode 100644
> index 000000000000..986f8b2b2d5b
> --- /dev/null
> +++ b/tools/perf/pmu-events/arch/x86/amdzen5/recommended.json
> @@ -0,0 +1,357 @@
> +[
> +  {
> +    "MetricName": "branch_misprediction_ratio",
> +    "BriefDescription": "Execution-time branch misprediction ratio (non-speculative).",

Is ratio or rate better?
```
$ grep -r MetricName tools/perf/pmu-events/arch/| grep _rate |wc -l
246
$ grep -r MetricName tools/perf/pmu-events/arch/| grep _ratio |wc -l
135
```

> +    "MetricExpr": "d_ratio(ex_ret_brn_misp, ex_ret_brn)",
> +    "MetricGroup": "branch_prediction",
> +    "ScaleUnit": "100%"
> +  },
> +  {
> +    "MetricName": "all_data_cache_accesses_pti",
> +    "BriefDescription": "All data cache accesses per thousand instructions.",
> +    "MetricExpr": "ls_dispatch.all / instructions",
> +    "MetricGroup": "l1_dcache",
> +    "ScaleUnit": "1e3"

Perhaps "1e3instructions", and below.

> +  },
> +  {
> +    "MetricName": "all_l2_cache_accesses_pti",
> +    "BriefDescription": "All L2 cache accesses per thousand instructions",
> +    "MetricExpr": "(l2_request_g1.all_no_prefetch + l2_pf_hit_l2.l2_hwpf + l2_pf_miss_l2_hit_l3.l2_hwpf + l2_pf_miss_l2_l3.l2_hwpf) / instructions",
> +    "MetricGroup": "l2_cache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l2_cache_accesses_from_l1_ic_misses_pti",
> +    "BriefDescription": "L2 cache accesses from L1 instruction cache misses (including prefetch) per thousand instructions.",
> +    "MetricExpr": "l2_request_g1.cacheable_ic_read / instructions",
> +    "MetricGroup": "l2_cache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l2_cache_accesses_from_l1_dc_misses_pti",
> +    "BriefDescription": "L2 cache accesses from L1 data cache misses (including prefetch) per thousand instructions.",
> +    "MetricExpr": "l2_request_g1.all_dc / instructions",
> +    "MetricGroup": "l2_cache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l2_cache_accesses_from_l2_hwpf_pti",
> +    "BriefDescription": "L2 cache accesses from L2 cache hardware prefetcher per thousand instructions.",
> +    "MetricExpr": "(l2_pf_hit_l2.l1_dc_l2_hwpf + l2_pf_miss_l2_hit_l3.l1_dc_l2_hwpf + l2_pf_miss_l2_l3.l1_dc_l2_hwpf) / instructions",
> +    "MetricGroup": "l2_cache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "all_l2_cache_misses_pti",
> +    "BriefDescription": "All L2 cache misses per thousand instructions.",
> +    "MetricExpr": "(l2_cache_req_stat.ic_dc_miss_in_l2 + l2_pf_miss_l2_hit_l3.l2_hwpf + l2_pf_miss_l2_l3.l2_hwpf) / instructions",
> +    "MetricGroup": "l2_cache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l2_cache_misses_from_l1_ic_miss_pti",
> +    "BriefDescription": "L2 cache misses from L1 instruction cache misses per thousand instructions.",
> +    "MetricExpr": "l2_cache_req_stat.ic_fill_miss / instructions",
> +    "MetricGroup": "l2_cache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l2_cache_misses_from_l1_dc_miss_pti",
> +    "BriefDescription": "L2 cache misses from L1 data cache misses per thousand instructions.",
> +    "MetricExpr": "l2_cache_req_stat.ls_rd_blk_c / instructions",
> +    "MetricGroup": "l2_cache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l2_cache_misses_from_l2_hwpf_pti",
> +    "BriefDescription": "L2 cache misses from L2 cache hardware prefetcher per thousand instructions.",
> +    "MetricExpr": "(l2_pf_miss_l2_hit_l3.l1_dc_l2_hwpf + l2_pf_miss_l2_l3.l1_dc_l2_hwpf) / instructions",
> +    "MetricGroup": "l2_cache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "all_l2_cache_hits_pti",
> +    "BriefDescription": "All L2 cache hits per thousand instructions.",
> +    "MetricExpr": "(l2_cache_req_stat.ic_dc_hit_in_l2 + l2_pf_hit_l2.l2_hwpf) / instructions",
> +    "MetricGroup": "l2_cache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l2_cache_hits_from_l1_ic_miss_pti",
> +    "BriefDescription": "L2 cache hits from L1 instruction cache misses per thousand instructions.",
> +    "MetricExpr": "l2_cache_req_stat.ic_hit_in_l2 / instructions",
> +    "MetricGroup": "l2_cache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l2_cache_hits_from_l1_dc_miss_pti",
> +    "BriefDescription": "L2 cache hits from L1 data cache misses per thousand instructions.",
> +    "MetricExpr": "l2_cache_req_stat.dc_hit_in_l2 / instructions",
> +    "MetricGroup": "l2_cache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l2_cache_hits_from_l2_hwpf_pti",
> +    "BriefDescription": "L2 cache hits from L2 cache hardware prefetcher per thousand instructions.",
> +    "MetricExpr": "l2_pf_hit_l2.l1_dc_l2_hwpf / instructions",
> +    "MetricGroup": "l2_cache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l3_cache_accesses",
> +    "BriefDescription": "L3 cache accesses.",
> +    "MetricExpr": "l3_lookup_state.all_coherent_accesses_to_l3",
> +    "MetricGroup": "l3_cache"
> +  },
> +  {
> +    "MetricName": "l3_misses",
> +    "BriefDescription": "L3 misses (including cacheline state change requests).",

local vs remote?

> +    "MetricExpr": "l3_lookup_state.l3_miss",
> +    "MetricGroup": "l3_cache"
> +  },
> +  {
> +    "MetricName": "l3_read_miss_latency",
> +    "BriefDescription": "Average L3 read miss latency (in core clocks).",
> +    "MetricExpr": "(l3_xi_sampled_latency.all * 10) / l3_xi_sampled_latency_requests.all",
> +    "MetricGroup": "l3_cache",
> +    "ScaleUnit": "1core clocks"
> +  },
> +  {
> +    "MetricName": "l3_read_miss_latency_for_local_dram",
> +    "BriefDescription": "Average L3 read miss latency (in core clocks) for local DRAM.",
> +    "MetricExpr": "(l3_xi_sampled_latency.dram_near * 10) / l3_xi_sampled_latency_requests.dram_near",
> +    "MetricGroup": "l3_cache",
> +    "ScaleUnit": "1core clocks"

"core clocks" isn't defined in the attached documentation. How can one
look up the different clock types? If "core" is basically all clock
types in the metrics then consider dropping "core" here.

> +  },
> +  {
> +    "MetricName": "l3_read_miss_latency_for_remote_dram",
> +    "BriefDescription": "Average L3 read miss latency (in core clocks) for remote DRAM.",
> +    "MetricExpr": "(l3_xi_sampled_latency.dram_far * 10) / l3_xi_sampled_latency_requests.dram_far",
> +    "MetricGroup": "l3_cache",
> +    "ScaleUnit": "1core clocks"
> +  },
> +  {
> +    "MetricName": "op_cache_fetch_miss_ratio",
> +    "BriefDescription": "Op cache miss ratio for all fetches.",
> +    "MetricExpr": "d_ratio(op_cache_hit_miss.op_cache_miss, op_cache_hit_miss.all_op_cache_accesses)",
> +    "ScaleUnit": "100%"
> +  },
> +  {
> +    "MetricName": "ic_fetch_miss_ratio",
> +    "BriefDescription": "Instruction cache miss ratio for all fetches. An instruction cache miss will not be counted by this metric if it is an OC hit.",
> +    "MetricExpr": "d_ratio(ic_tag_hit_miss.instruction_cache_miss, ic_tag_hit_miss.all_instruction_cache_accesses)",
> +    "ScaleUnit": "100%"
> +  },
> +  {
> +    "MetricName": "l1_data_cache_fills_from_memory_pti",
> +    "BriefDescription": "L1 data cache fills from DRAM or MMIO in any NUMA node per thousand instructions.",
> +    "MetricExpr": "ls_any_fills_from_sys.dram_io_all / instructions",
> +    "MetricGroup": "l1_dcache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l1_data_cache_fills_from_remote_node_pti",
> +    "BriefDescription": "L1 data cache fills from a different NUMA node per thousand instructions.",
> +    "MetricExpr": "ls_any_fills_from_sys.far_all / instructions",
> +    "MetricGroup": "l1_dcache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l1_data_cache_fills_from_same_ccx_pti",
> +    "BriefDescription": "L1 data cache fills from within the same CCX per thousand instructions.",
> +    "MetricExpr": "ls_any_fills_from_sys.local_all / instructions",
> +    "MetricGroup": "l1_dcache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l1_data_cache_fills_from_different_ccx_pti",
> +    "BriefDescription": "L1 data cache fills from another CCX cache in any NUMA node per thousand instructions.",
> +    "MetricExpr": "ls_any_fills_from_sys.remote_cache / instructions",
> +    "MetricGroup": "l1_dcache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "all_l1_data_cache_fills_pti",
> +    "BriefDescription": "All L1 data cache fills per thousand instructions.",
> +    "MetricExpr": "ls_any_fills_from_sys.all / instructions",
> +    "MetricGroup": "l1_dcache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l1_demand_data_cache_fills_from_local_l2_pti",
> +    "BriefDescription": "L1 demand data cache fills from local L2 cache per thousand instructions.",
> +    "MetricExpr": "ls_dmnd_fills_from_sys.local_l2 / instructions",
> +    "MetricGroup": "l1_dcache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l1_demand_data_cache_fills_from_same_ccx_pti",
> +    "BriefDescription": "L1 demand data cache fills from within the same CCX per thousand instructions.",
> +    "MetricExpr": "ls_dmnd_fills_from_sys.local_ccx / instructions",
> +    "MetricGroup": "l1_dcache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l1_demand_data_cache_fills_from_near_cache_pti",
> +    "BriefDescription": "L1 demand data cache fills from another CCX cache in the same NUMA node per thousand instructions.",
> +    "MetricExpr": "ls_dmnd_fills_from_sys.near_cache / instructions",
> +    "MetricGroup": "l1_dcache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l1_demand_data_cache_fills_from_near_memory_pti",
> +    "BriefDescription": "L1 demand data cache fills from DRAM or MMIO in the same NUMA node per thousand instructions.",
> +    "MetricExpr": "ls_dmnd_fills_from_sys.dram_io_near / instructions",
> +    "MetricGroup": "l1_dcache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l1_demand_data_cache_fills_from_far_cache_pti",
> +    "BriefDescription": "L1 demand data cache fills from another CCX cache in a different NUMA node per thousand instructions.",
> +    "MetricExpr": "ls_dmnd_fills_from_sys.far_cache / instructions",
> +    "MetricGroup": "l1_dcache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l1_demand_data_cache_fills_from_far_memory_pti",
> +    "BriefDescription": "L1 demand data cache fills from DRAM or MMIO in a different NUMA node per thousand instructions.",
> +    "MetricExpr": "ls_dmnd_fills_from_sys.dram_io_far / instructions",
> +    "MetricGroup": "l1_dcache",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l1_itlb_misses_pti",
> +    "BriefDescription": "L1 instruction TLB misses per thousand instructions.",
> +    "MetricExpr": "(bp_l1_tlb_miss_l2_tlb_hit + bp_l1_tlb_miss_l2_tlb_miss.all) / instructions",
> +    "MetricGroup": "tlb",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l2_itlb_misses_pti",
> +    "BriefDescription": "L2 instruction TLB misses and instruction page walks per thousand instructions.",
> +    "MetricExpr": "bp_l1_tlb_miss_l2_tlb_miss.all / instructions",
> +    "MetricGroup": "tlb",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l1_dtlb_misses_pti",
> +    "BriefDescription": "L1 data TLB misses per thousand instructions.",
> +    "MetricExpr": "ls_l1_d_tlb_miss.all / instructions",
> +    "MetricGroup": "tlb",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "l2_dtlb_misses_pti",
> +    "BriefDescription": "L2 data TLB misses and data page walks per thousand instructions.",
> +    "MetricExpr": "ls_l1_d_tlb_miss.all_l2_miss / instructions",
> +    "MetricGroup": "tlb",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "all_tlbs_flushed_pti",
> +    "BriefDescription": "All TLBs flushed per thousand instructions.",
> +    "MetricExpr": "ls_tlb_flush.all / instructions",
> +    "MetricGroup": "tlb",
> +    "ScaleUnit": "1e3"
> +  },
> +  {
> +    "MetricName": "macro_ops_dispatched",
> +    "BriefDescription": "Macro-ops dispatched.",
> +    "MetricExpr": "de_src_op_disp.all",
> +    "MetricGroup": "decoder"
> +  },
> +  {
> +    "MetricName": "sse_avx_stalls",
> +    "BriefDescription": "Mixed SSE/AVX stalls.",
> +    "MetricExpr": "fp_disp_faults.sse_avx_all"
> +  },
> +  {
> +    "MetricName": "macro_ops_retired",
> +    "BriefDescription": "Macro-ops retired.",
> +    "MetricExpr": "ex_ret_ops"
> +  },
> +  {
> +    "MetricName": "umc_data_bus_utilization",
> +    "BriefDescription": "Memory controller data bus utilization.",
> +    "MetricExpr": "d_ratio(umc_data_slot_clks.all / 2, umc_mem_clk)",
> +    "MetricGroup": "memory_controller",
> +    "PerPkg": "1",
> +    "ScaleUnit": "100%"
> +  },
> +  {
> +    "MetricName": "umc_cas_cmd_rate",
> +    "BriefDescription": "Memory controller CAS command rate.",
> +    "MetricExpr": "d_ratio(umc_cas_cmd.all * 1000, umc_mem_clk)",
> +    "MetricGroup": "memory_controller",
> +    "PerPkg": "1"
> +  },
> +  {
> +    "MetricName": "umc_cas_cmd_read_ratio",
> +    "BriefDescription": "Ratio of memory controller CAS commands for reads.",
> +    "MetricExpr": "d_ratio(umc_cas_cmd.rd, umc_cas_cmd.all)",
> +    "MetricGroup": "memory_controller",
> +    "PerPkg": "1",
> +    "ScaleUnit": "100%"
> +  },
> +  {
> +    "MetricName": "umc_cas_cmd_write_ratio",
> +    "BriefDescription": "Ratio of memory controller CAS commands for writes.",
> +    "MetricExpr": "d_ratio(umc_cas_cmd.wr, umc_cas_cmd.all)",
> +    "MetricGroup": "memory_controller",
> +    "PerPkg": "1",
> +    "ScaleUnit": "100%"
> +  },
> +  {
> +    "MetricName": "umc_mem_read_bandwidth",
> +    "BriefDescription": "Estimated memory read bandwidth.",
> +    "MetricExpr": "(umc_cas_cmd.rd * 64) / 1e6 / duration_time",
> +    "MetricGroup": "memory_controller",
> +    "PerPkg": "1",
> +    "ScaleUnit": "1MB/s"
> +  },
> +  {
> +    "MetricName": "umc_mem_write_bandwidth",
> +    "BriefDescription": "Estimated memory write bandwidth.",
> +    "MetricExpr": "(umc_cas_cmd.wr * 64) / 1e6 / duration_time",
> +    "MetricGroup": "memory_controller",
> +    "PerPkg": "1",
> +    "ScaleUnit": "1MB/s"
> +  },
> +  {
> +    "MetricName": "umc_mem_bandwidth",
> +    "BriefDescription": "Estimated combined memory bandwidth.",
> +    "MetricExpr": "(umc_cas_cmd.all * 64) / 1e6 / duration_time",
> +    "MetricGroup": "memory_controller",
> +    "PerPkg": "1",
> +    "ScaleUnit": "1MB/s"
> +  },
> +  {
> +    "MetricName": "umc_cas_cmd_read_ratio",
> +    "BriefDescription": "Ratio of memory controller CAS commands for reads.",
> +    "MetricExpr": "d_ratio(umc_cas_cmd.rd, umc_cas_cmd.all)",
> +    "MetricGroup": "memory_controller",
> +    "PerPkg": "1",
> +    "ScaleUnit": "100%"
> +  },
> +  {
> +    "MetricName": "umc_cas_cmd_rate",
> +    "BriefDescription": "Memory controller CAS command rate.",
> +    "MetricExpr": "d_ratio(umc_cas_cmd.all * 1000, umc_mem_clk)",
> +    "MetricGroup": "memory_controller",
> +    "PerPkg": "1"
> +  },
> +  {
> +    "MetricName": "umc_activate_cmd_rate",
> +    "BriefDescription": "Memory controller ACTIVATE command rate.",
> +    "MetricExpr": "d_ratio(umc_act_cmd.all * 1000, umc_mem_clk)",
> +    "MetricGroup": "memory_controller",
> +    "PerPkg": "1"
> +  },
> +  {
> +    "MetricName": "umc_precharge_cmd_rate",
> +    "BriefDescription": "Memory controller PRECHARGE command rate.",
> +    "MetricExpr": "d_ratio(umc_pchg_cmd.all * 1000, umc_mem_clk)",
> +    "MetricGroup": "memory_controller",
> +    "PerPkg": "1"

Units of umc_mem_clk?

Thanks,
Ian

> +  }
> +]
> --
> 2.34.1
>

Powered by blists - more mailing lists