lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240317231000.GA22886@bhlegrsu.conti.de>
Date: Mon, 18 Mar 2024 00:10:00 +0100
From: Wadim Mueller <wafgo01@...il.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc: Wadim Mueller <wafgo01@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Rob Herring <robh+dt@...nel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
	Sascha Hauer <s.hauer@...gutronix.de>,
	Pengutronix Kernel Team <kernel@...gutronix.de>,
	Fabio Estevam <festevam@...il.com>,
	NXP Linux Team <linux-imx@....com>,
	Chester Lin <chester62515@...il.com>,
	Andreas Färber <afaerber@...e.de>,
	Matthias Brugger <mbrugger@...e.com>,
	NXP S32 Linux Team <s32@....com>,
	Alexandre Torgue <alexandre.torgue@...s.st.com>,
	Jose Abreu <joabreu@...opsys.com>,
	Maxime Coquelin <mcoquelin.stm32@...il.com>,
	Michael Turquette <mturquette@...libre.com>,
	Stephen Boyd <sboyd@...nel.org>,
	Richard Cochran <richardcochran@...il.com>,
	Simon Horman <horms@...nel.org>,
	Andrew Halaney <ahalaney@...hat.com>,
	Bartosz Golaszewski <bartosz.golaszewski@...aro.org>,
	Johannes Zink <j.zink@...gutronix.de>,
	Shenwei Wang <shenwei.wang@....com>,
	"Russell King (Oracle)" <rmk+kernel@...linux.org.uk>,
	Swee Leong Ching <leong.ching.swee@...el.com>,
	Giuseppe Cavallaro <peppe.cavallaro@...com>, netdev@...r.kernel.org,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-stm32@...md-mailman.stormreply.com, linux-clk@...r.kernel.org
Subject: Re: [PATCH 1/3] arm64: dts: S32G3: Introduce device tree for
 S32G-VNP-RDB3

On Sun, Mar 17, 2024 at 03:50:55PM +0100, Krzysztof Kozlowski wrote:
> On 15/03/2024 23:27, Wadim Mueller wrote:
> > This commit adds device tree support for the NXP S32G3-based
> > S32G-VNP-RDB3 Board (Vehicle Networking Platform - Reference Design Board) [1].
> > 
> > The S32G3 features an 8-core ARM Cortex-A53 based SoC developed by NXP.
> > 
> > The device tree files are derived from the official NXP downstream Linux tree [2].
> > 
> > This addition encompasses a limited selection of peripherals that are upstream-supported. Apart from the ARM System Modules (GIC, Generic Timer, etc.), the following IPs have been validated:
> > 
> >     UART: fsl-linflexuart
> >     SDHC: fsl-imx-esdhc
> >     Ethernet: synopsys gmac/stmac
> > 
> > Clock settings for the chip rely on ATF Firmware [3]. Pin control integration into the device tree is pending and currently relies on Firmware/U-Boot settings [4].
> > 
> > These changes were validated using the latest BSP39 Firmware/U-Boot from NXP [5].
> > 
> > The modifications enable booting the official Ubuntu 22.04 from NXP on
> > the RDB3 with default settings from the SD card and eMMC.
> > 
> > [1] https://www.nxp.com/design/design-center/designs/s32g3-vehicle-networking-reference-design:S32G-VNP-RDB3
> > [2] https://github.com/nxp-auto-linux/linux
> > [3] https://github.com/nxp-auto-linux/arm-trusted-firmware
> > [4] https://github.com/nxp-auto-linux/u-boot
> > [5] https://github.com/nxp-auto-linux/auto_yocto_bsp
> > 
> > Signed-off-by: Wadim Mueller <wafgo01@...il.com>
> > ---
> >  arch/arm64/boot/dts/freescale/Makefile        |   1 +
> >  arch/arm64/boot/dts/freescale/s32g3.dtsi      | 352 ++++++++++++++++++
> >  .../boot/dts/freescale/s32g399a-rdb3.dts      |  57 +++
> >  .../dt-bindings/clock/nxp,s32-scmi-clock.h    | 158 ++++++++
> 
> Please run scripts/checkpatch.pl and fix reported warnings. Some
> warnings can be ignored, but the code here looks like it needs a fix.
> Feel free to get in touch if the warning is not clear.
> 
> Bindings are not DTS.
> 
> >  4 files changed, 568 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/freescale/s32g3.dtsi
> >  create mode 100644 arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
> >  create mode 100644 include/dt-bindings/clock/nxp,s32-scmi-clock.h
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> > index 2cb0212b63c6..e701008dbc7b 100644
> > --- a/arch/arm64/boot/dts/freescale/Makefile
> > +++ b/arch/arm64/boot/dts/freescale/Makefile
> > @@ -252,3 +252,4 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-rpidsi.dtb
> >  dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb
> >  dtb-$(CONFIG_ARCH_S32) += s32g274a-rdb2.dtb
> >  dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb
> > +dtb-$(CONFIG_ARCH_S32) += s32g399a-rdb3.dtb
> > diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
> > new file mode 100644
> > index 000000000000..481ddcfd3a6d
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
> > @@ -0,0 +1,352 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/clock/nxp,s32-scmi-clock.h>
> > +/ {
> > +	compatible = "nxp,s32g3";
> 
> Order your patches correctly. Bindings come before users.
> 
> > +	interrupt-parent = <&gic>;
> > +	#address-cells = <0x02>;
> > +	#size-cells = <0x02>;
> > +
> > +	cpus {
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		cpu-map {
> > +			cluster0 {
> > +				core0 {
> > +					cpu = <&cpu0>;
> > +				};
> > +
> > +				core1 {
> > +					cpu = <&cpu1>;
> > +				};
> > +
> > +				core2 {
> > +					cpu = <&cpu2>;
> > +				};
> > +
> > +				core3 {
> > +					cpu = <&cpu3>;
> > +				};
> > +			};
> > +
> > +			cluster1 {
> > +				core0 {
> > +					cpu = <&cpu4>;
> > +				};
> > +
> > +				core1 {
> > +					cpu = <&cpu5>;
> > +				};
> > +
> > +				core2 {
> > +					cpu = <&cpu6>;
> > +				};
> > +
> > +				core3 {
> > +					cpu = <&cpu7>;
> > +				};
> > +			};
> > +		};
> > +
> > +		cpu0: cpu@0 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a53";
> > +			reg = <0x0>;
> > +			enable-method = "psci";
> > +			clocks = <&dfs S32_SCMI_CLK_A53>;
> > +			next-level-cache = <&cluster0_l2_cache>;
> > +			#cooling-cells = <2>;
> > +		};
> > +
> > +		cpu1: cpu@1 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a53";
> > +			reg = <0x1>;
> > +			enable-method = "psci";
> > +			clocks = <&dfs S32_SCMI_CLK_A53>;
> > +			next-level-cache = <&cluster0_l2_cache>;
> > +			#cooling-cells = <2>;
> > +		};
> > +
> > +		cpu2: cpu@2 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a53";
> > +			reg = <0x2>;
> > +			enable-method = "psci";
> > +			clocks = <&dfs S32_SCMI_CLK_A53>;
> > +			next-level-cache = <&cluster0_l2_cache>;
> > +			#cooling-cells = <2>;
> > +		};
> > +
> > +		cpu3: cpu@3 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a53";
> > +			reg = <0x3>;
> > +			enable-method = "psci";
> > +			clocks = <&dfs S32_SCMI_CLK_A53>;
> > +			next-level-cache = <&cluster0_l2_cache>;
> > +			#cooling-cells = <2>;
> > +		};
> > +
> > +		cpu4: cpu@100 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a53";
> > +			reg = <0x100>;
> > +			enable-method = "psci";
> > +			clocks = <&dfs S32_SCMI_CLK_A53>;
> > +			next-level-cache = <&cluster1_l2_cache>;
> > +			#cooling-cells = <2>;
> > +		};
> > +
> > +		cpu5: cpu@101 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a53";
> > +			reg = <0x101>;
> > +			enable-method = "psci";
> > +			clocks = <&dfs S32_SCMI_CLK_A53>;
> > +			next-level-cache = <&cluster1_l2_cache>;
> > +			#cooling-cells = <2>;
> > +		};
> > +
> > +		cpu6: cpu@102 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a53";
> > +			reg = <0x102>;
> > +			enable-method = "psci";
> > +			clocks = <&dfs S32_SCMI_CLK_A53>;
> > +			next-level-cache = <&cluster1_l2_cache>;
> > +			#cooling-cells = <2>;
> > +		};
> > +
> > +		cpu7: cpu@103 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a53";
> > +			reg = <0x103>;
> > +			enable-method = "psci";
> > +			clocks = <&dfs S32_SCMI_CLK_A53>;
> > +			next-level-cache = <&cluster1_l2_cache>;
> > +			#cooling-cells = <2>;
> > +		};
> > +
> > +		cluster0_l2_cache: l2-cache0 {
> 
> l2-cache-0
> 
> > +			compatible = "cache";
> > +			status = "okay";
> 
> Why do you need it? It's enabled by default.
> 

Thanks for the hint, will drop it.

> Anyway it incomplete:
> It does not look like you tested the DTS against bindings. Please run
> `make dtbs_check W=1` (see
> Documentation/devicetree/bindings/writing-schema.rst or
> https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
> for instructions).
>

I was not aware of this make target. Thanks for pointing me to the doc.
I will try to remove all warnings and come back with a fixed version.

> > +		};
> > +
> > +		cluster1_l2_cache: l2-cache1 {
> 
> l2-cache-1
> 
> > +			compatible = "cache";
> > +			status = "okay";
> > +		};
> > +	};
> > +
> > +	pmu {
> > +		compatible = "arm,cortex-a53-pmu";
> > +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> > +	};
> > +
> > +	timer {
> > +		compatible = "arm,armv8-timer";
> > +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* sec-phys */
> > +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* virt */
> > +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* hyp-virt */
> > +		             <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, /* sec-phys */
> > +		             <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; /* phys */
> > +		always-on;
> > +	};
> > +
> > +	reserved-memory  {
> > +		#address-cells = <2>;
> > +		#size-cells = <2>;
> > +		ranges;
> > +
> > +		scmi_tx_buf: shm@...00000 {
> > +			compatible = "arm,scmi-shmem";
> > +			reg = <0x0 0xd0000000 0x0 0x80>;
> > +			no-map;
> > +		};
> > +
> > +		scmi_rx_buf: shm@...00080 {
> > +			compatible = "arm,scmi-shmem";
> > +			reg = <0x0 0xd0000080 0x0 0x80>;
> > +			no-map;
> > +		};
> > +	};
> > +
> > +	firmware {
> > +		scmi: scmi {
> > +			compatible = "arm,scmi-smc";
> > +			mbox-names = "tx", "rx";
> > +			shmem = <&scmi_tx_buf>, <&scmi_rx_buf>;
> > +			arm,smc-id = <0xc20000fe>;
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			status = "okay";
> 
> Drop or explain why is it needed.
> 

status is superfluous, right?

> > +			interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
> > +			interrupt-names = "p2a_notif";
> > +
> > +			dfs: protocol@13 {
> > +				reg = <0x13>;
> > +				#clock-cells = <1>;
> > +			};
> > +
> > +			clks: protocol@14 {
> > +				reg = <0x14>;
> > +				#clock-cells = <1>;
> > +			};
> > +
> > +			reset: protocol@16 {
> > +				reg = <0x16>;
> > +				#reset-cells = <1>;
> > +			};
> > +
> > +			pinctrl_scmi: protocol@80 {
> > +				reg = <0x80>;
> > +				#pinctrl-cells = <2>;
> > +
> > +				status = "disabled";
> > +			};
> > +		};
> > +
> > +		psci: psci {
> > +			compatible = "arm,psci-1.0";
> > +			method = "smc";
> > +		};
> > +	};
> > +
> > +	soc@0 {
> > +		compatible = "simple-bus";
> > +		#address-cells = <1>;
> > +		#size-cells = <1>;
> > +		ranges = <0 0 0 0x80000000>;
> > +
> > +		uart0: serial@...c8000 {
> > +			compatible = "nxp,s32g3-linflexuart",
> > +				     "fsl,s32v234-linflexuart";
> > +			reg = <0x401c8000 0x3000>;
> > +			interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>;
> > +			status = "disabled";
> > +		};
> > +
> > +		uart1: serial@...cc000 {
> > +			compatible = "nxp,s32g3-linflexuart",
> > +				     "fsl,s32v234-linflexuart";
> > +			reg = <0x401cc000 0x3000>;
> > +			interrupts = <GIC_SPI 83 IRQ_TYPE_EDGE_RISING>;
> > +			status = "disabled";
> > +		};
> > +
> > +		uart2: serial@...bc000 {
> > +			compatible = "nxp,s32g3-linflexuart",
> > +				     "fsl,s32v234-linflexuart";
> > +			reg = <0x402bc000 0x3000>;
> > +			interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
> > +			status = "disabled";
> > +		};
> > +
> > +		gic: interrupt-controller@...00000 {
> > +			compatible = "arm,gic-v3";
> > +			#interrupt-cells = <3>;
> > +			interrupt-controller;
> > +			reg = <0x50800000 0x10000>,
> > +			      <0x50900000 0x200000>,
> > +			      <0x50400000 0x2000>,
> > +			      <0x50410000 0x2000>,
> > +			      <0x50420000 0x2000>;
> > +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> > +			mbi-ranges = <167 16>;
> > +		};
> > +
> > +		qspi: spi@...34000 {
> 
> Keep order by unit address.
> 

Will fix that, thanks.

> > +			compatible = "nxp,s32g3-qspi";
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			reg = <0x0 0x00000000 0x0 0x20000000>,
> > +				<0x0 0x40134000 0x0 0x1000>;
> > +			reg-names = "QuadSPI-memory", "QuadSPI";
> > +			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> > +			clock-names = "qspi_en", "qspi";
> > +			clocks = <&clks S32_SCMI_CLK_QSPI_FLASH1X>,
> > +				 <&clks S32_SCMI_CLK_QSPI_FLASH1X>;
> > +			spi-max-frequency = <200000000>;
> > +			spi-num-chipselects = <2>;
> > +			status = "disabled";
> > +		};
> > +
> > +		usdhc0: mmc@...f0000 {
> > +			compatible = "nxp,s32g3-usdhc",
> > +			             "nxp,s32g2-usdhc";
> > +			reg = <0x402f0000 0x1000>;
> > +			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&clks S32_SCMI_CLK_USDHC_MODULE>,
> > +				 <&clks S32_SCMI_CLK_USDHC_AHB>,
> > +				 <&clks S32_SCMI_CLK_USDHC_CORE>;
> > +			clock-names = "ipg", "ahb", "per";
> > +			status = "disabled";
> > +		};
> > +
> > +		gmac0: ethernet@...3c000 {
> > +			status = "disabled";
> 
> Random code... sorry, but status does not come first. Put it last and
> please read carefully DTS coding style.
>

Will be fixed, thanks!

> > +			compatible = "nxp,s32-dwmac";
> > +			reg = <0x4033c000 0x2000>, /* gmac IP */
> > +			      <0x4007c004 0x4>;    /* S32 CTRL_STS reg */
> > +			interrupt-parent = <&gic>;
> > +			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> > +			interrupt-names = "macirq";
> > +			tx-fifo-depth = <20480>;
> > +			rx-fifo-depth = <20480>;
> > +			dma-coherent;
> > +			snps,mtl-rx-config = <&mtl_rx_setup_gmac0>;
> > +			snps,mtl-tx-config = <&mtl_tx_setup_gmac0>;
> > +			clocks = <&clks S32_SCMI_CLK_GMAC0_AXI>,
> > +				 <&clks S32_SCMI_CLK_GMAC0_AXI>,
> > +				 <&clks S32_SCMI_CLK_GMAC0_TX_SGMII>,
> > +				 <&clks S32_SCMI_CLK_GMAC0_TX_RGMII>,
> > +				 <&clks S32_SCMI_CLK_GMAC0_TX_RMII>,
> > +				 <&clks S32_SCMI_CLK_GMAC0_TX_MII>,
> > +				 <&clks S32_SCMI_CLK_GMAC0_RX_SGMII>,
> > +				 <&clks S32_SCMI_CLK_GMAC0_RX_RGMII>,
> > +				 <&clks S32_SCMI_CLK_GMAC0_RX_RMII>,
> > +				 <&clks S32_SCMI_CLK_GMAC0_RX_MII>,
> > +				 <&clks S32_SCMI_CLK_GMAC0_TS>;
> > +			clock-names = "stmmaceth", "pclk",
> > +				      "tx_sgmii", "tx_rgmii",
> > +				      "tx_rmii", "tx_mii",
> > +				      "rx_sgmii", "rx_rgmii",
> > +				      "rx_rmii", "rx_mii",
> > +				      "ptp_ref";
> > +
> > +			mtl_rx_setup_gmac0: rx-queues-config {
> > +				snps,rx-queues-to-use = <5>;
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> > +
> > +				queue@0 {};
> > +				queue@1 {};
> > +				queue@2 {};
> > +				queue@3 {};
> > +				queue@4 {};
> > +			};
> > +
> > +			mtl_tx_setup_gmac0: tx-queues-config {
> > +				snps,tx-queues-to-use = <5>;
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> > +
> > +				queue@0 {};
> > +				queue@1 {};
> > +				queue@2 {};
> > +				queue@3 {};
> > +				queue@4 {};
> > +			};
> > +
> > +			gmac0_mdio: mdio0 {
> 
> mdio?
>

Can you please explain what the problem with mdio is? Is it the label?

> It does not look like you tested the DTS against bindings. Please run
> `make dtbs_check W=1` (see
> Documentation/devicetree/bindings/writing-schema.rst or
> https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
> for instructions).
> 
> > +				compatible = "snps,dwmac-mdio";
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> > +			};
> > +		};
> > +
> > +	};
> > +};
> > diff --git a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
> > new file mode 100644
> > index 000000000000..707b503c0165
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
> > @@ -0,0 +1,57 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +/*
> > + * NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3)
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "s32g3.dtsi"
> > +
> > +/ {
> > +	model = "NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3)";
> > +	compatible = "nxp,s32g399a-rdb3", "nxp,s32g3";
> 
> Missing bindings.
> 

Will be fixed. Thanks

> 
> 
> Best regards,
> Krzysztof
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ