| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240320-linux-next-nand-yaml-v1-1-2d2495363e88@microchip.com>
Date: Wed, 20 Mar 2024 11:22:07 +0530
From: Balamanikandan Gunasundar <balamanikandan.gunasundar@...rochip.com>
To: Miquel Raynal <miquel.raynal@...tlin.com>, Richard Weinberger
<richard@....at>, Vignesh Raghavendra <vigneshr@...com>, Rob Herring
<robh@...nel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Nicolas Ferre
<nicolas.ferre@...rochip.com>, Alexandre Belloni
<alexandre.belloni@...tlin.com>, Claudiu Beznea <claudiu.beznea@...on.dev>
CC: <linux-mtd@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
Balamanikandan Gunasundar <balamanikandan.gunasundar@...rochip.com>
Subject: [PATCH 1/3] dt-bindings: mtd: atmel-nand: convert txt to yaml
Convert text to yaml for atmel nand controller
Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@...rochip.com>
---
.../devicetree/bindings/mtd/atmel-nand.txt | 50 -------
.../devicetree/bindings/mtd/atmel-nand.yaml | 166 +++++++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 167 insertions(+), 51 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
index 4598930851d9..e332515c499a 100644
--- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -1,53 +1,3 @@
-Atmel NAND flash controller bindings
-
-The NAND flash controller node should be defined under the EBI bus (see
-Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt).
-One or several NAND devices can be defined under this NAND controller.
-The NAND controller might be connected to an ECC engine.
-
-* NAND controller bindings:
-
-Required properties:
-- compatible: should be one of the following
- "atmel,at91rm9200-nand-controller"
- "atmel,at91sam9260-nand-controller"
- "atmel,at91sam9261-nand-controller"
- "atmel,at91sam9g45-nand-controller"
- "atmel,sama5d3-nand-controller"
- "microchip,sam9x60-nand-controller"
-- ranges: empty ranges property to forward EBI ranges definitions.
-- #address-cells: should be set to 2.
-- #size-cells: should be set to 1.
-- atmel,nfc-io: phandle to the NFC IO block. Only required for sama5d3
- controllers.
-- atmel,nfc-sram: phandle to the NFC SRAM block. Only required for sama5d3
- controllers.
-
-Optional properties:
-- ecc-engine: phandle to the PMECC block. Only meaningful if the SoC embeds
- a PMECC engine.
-
-* NAND device/chip bindings:
-
-Required properties:
-- reg: describes the CS lines assigned to the NAND device. If the NAND device
- exposes multiple CS lines (multi-dies chips), your reg property will
- contain X tuples of 3 entries.
- 1st entry: the CS line this NAND chip is connected to
- 2nd entry: the base offset of the memory region assigned to this
- device (always 0)
- 3rd entry: the memory region size (always 0x800000)
-
-Optional properties:
-- rb-gpios: the GPIO(s) used to check the Ready/Busy status of the NAND.
-- cs-gpios: the GPIO(s) used to control the CS line.
-- det-gpios: the GPIO used to detect if a Smartmedia Card is present.
-- atmel,rb: an integer identifying the native Ready/Busy pin. Only meaningful
- on sama5 SoCs.
-
-All generic properties are described in the generic yaml files under
-Documentation/devicetree/bindings/mtd/.
-
* ECC engine (PMECC) bindings:
Required properties:
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.yaml b/Documentation/devicetree/bindings/mtd/atmel-nand.yaml
new file mode 100644
index 000000000000..a5482d292293
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/atmel-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel NAND flash controller
+
+maintainers:
+ - Balamanikandan Gunasundar <balamanikandan.gunasundar@...rochip.com>
+
+description: |
+ The NAND flash controller node should be defined under the EBI bus (see
+ Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt|yaml).
+ One or several NAND devices can be defined under this NAND controller.
+ The NAND controller might be connected to an ECC engine.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - atmel,at91rm9200-nand-controller
+ - atmel,at91sam9260-nand-controller
+ - atmel,at91sam9261-nand-controller
+ - atmel,at91sam9g45-nand-controller
+ - atmel,sama5d3-nand-controller
+ - microchip,sam9x60-nand-controller
+
+ ranges:
+ description: empty ranges property to forward EBI ranges definitions.
+
+ ecc-engine:
+ description:
+ phandle to the PMECC block. Only meaningful if the SoC embeds a PMECC
+ engine.
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - atmel,at91rm9200-nand-controller
+ - atmel,at91sam9260-nand-controller
+ - atmel,at91sam9261-nand-controller
+ - atmel,at91sam9g45-nand-controller
+ - atmel,sama5d3-nand-controller
+ - microchip,sam9x60-nand-controller
+ then:
+ properties:
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: atmel,sama5d3-nand-controller
+ then:
+ properties:
+ atmel,nfc-io:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the NFC IO block.
+
+ atmel,nfc-sram:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the NFC SRAM block
+
+required:
+ - compatible
+ - ranges
+ - "#address-cells"
+ - "#size-cells"
+
+patternProperties:
+ "^nand@[a-f0-9]$":
+ type: object
+ $ref: nand-chip.yaml#
+ description:
+ NAND chip bindings. All generic properties described in
+ Documentation/devicetree/bindings/mtd/{common,nand}.txt also apply to
+ the NAND device node, and NAND partitions should be defined under the
+ NAND node as described in
+ Documentation/devicetree/bindings/mtd/partition.txt.
+
+ properties:
+ reg:
+ minItems: 1
+ description:
+ describes the CS lines assigned to the NAND device. If the NAND device
+ exposes multiple CS lines (multi-dies chips), your reg property will
+ contain X tuples of 3 entries.
+ reg = <0x3 0x0 0x800000>;
+ 1st entry - the CS line this NAND chip is connected to
+ 2nd entry - the base offset of the memory region assigned to this
+ device (always 0)
+ 3rd entry - the memory region size (always 0x800000)
+
+ rb-gpios:
+ description:
+ the GPIO(s) used to check the Ready/Busy status of the NAND.
+
+ cs-gpios:
+ description:
+ the GPIO(s) used to control the CS line.
+
+ det-gpios:
+ description:
+ the GPIO used to detect if a Smartmedia Card is present.
+
+ "atmel,rb":
+ description:
+ an integer identifying the native Ready/Busy pin. Only meaningful
+ on sama5 SoCs.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ nfc_io: nfc-io@...00000 {
+ compatible = "atmel,sama5d3-nfc-io", "syscon";
+ reg = <0x70000000 0x8000000>;
+ };
+
+ pmecc: ecc-engine@...fc070 {
+ compatible = "atmel,at91sam9g45-pmecc";
+ reg = <0xffffc070 0x490>,
+ <0xffffc500 0x100>;
+ };
+
+ ebi: ebi@...00000 {
+ compatible = "atmel,sama5d3-ebi";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ atmel,smc = <&hsmc>;
+ reg = <0x10000000 0x10000000
+ 0x40000000 0x30000000>;
+ ranges = <0x0 0x0 0x10000000 0x10000000
+ 0x1 0x0 0x40000000 0x10000000
+ 0x2 0x0 0x50000000 0x10000000
+ 0x3 0x0 0x60000000 0x10000000>;
+ clocks = <&mck>;
+
+ nandflash_controller: nandflash-controller {
+ compatible = "atmel,sama5d3-nand-controller";
+ ecc-engine = <&pmecc>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ nand@3 {
+ reg = <0x3 0x0 0x800000>;
+ atmel,rb = <0>;
+
+ /*
+ * Put generic NAND/MTD properties and
+ * subnodes here.
+ */
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index b6582bd3eb2c..3f2a6756223f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14503,7 +14503,7 @@ MICROCHIP NAND DRIVER
M: Balamanikandan Gunasundar <balamanikandan.gunasundar@...rochip.com>
L: linux-mtd@...ts.infradead.org
S: Supported
-F: Documentation/devicetree/bindings/mtd/atmel-nand.txt
+F: Documentation/devicetree/bindings/mtd/atmel-*.yaml
F: drivers/mtd/nand/raw/atmel/*
MICROCHIP OTPC DRIVER
--
2.25.1
Powered by blists - more mailing lists