lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAA8EJpq3eKFYhBbnggzRy2acE6uSyWGqCMcLxfkqx1Hot50gRw@mail.gmail.com>
Date: Fri, 22 Mar 2024 12:54:39 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Luca Weiss <luca.weiss@...rphone.com>
Cc: Bjorn Andersson <andersson@...nel.org>, Konrad Dybcio <konrad.dybcio@...aro.org>, 
	Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>, Rob Herring <robh@...nel.org>, 
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>, 
	Wesley Cheng <quic_wcheng@...cinc.com>, "Bryan O'Donoghue" <bryan.odonoghue@...aro.org>, 
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>, ~postmarketos/upstreaming@...ts.sr.ht, 
	phone-devel@...r.kernel.org, linux-arm-msm@...r.kernel.org, 
	linux-kernel@...r.kernel.org, devicetree@...r.kernel.org, 
	linux-usb@...r.kernel.org
Subject: Re: [PATCH 5/5] arm64: dts: qcom: sm7225-fairphone-fp4: Enable USB
 role switching

On Fri, 22 Mar 2024 at 10:03, Luca Weiss <luca.weiss@...rphone.com> wrote:
>
> Configure the Type-C and VBUS regulator on PM7250B and wire it up to the
> USB PHY, so that USB role and orientation switching works.
>
> Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
> ---
> With this patch I'm not quite sure if the 'ports' are connected
> correctly, though functionally everything appears to work fine.
>
> On some other SoCs port@1 in qmpphy and a second port in dwc3 are
> connected together also - one port of USB 2.0 HS, one for USB 3.0 SS.
>
> Here I'm following sm8250's solution. Also checking the binding doc
> doesn't reveal anything useful.

Thanks for pointing it out. The SM8250 / RB5 predated final DP
bindings / graphs. As such it didn't fully describe the signal chain
(the signals go from DWC3 and from DP controllers to the QMP PHY,
where they are muxed to the 4 output lanes).
I'll post an update for sm8250 / bindings doc.

I'd kindly ask to connect qmp / port@1 and dwc / port@1

> ---
>  arch/arm64/boot/dts/qcom/sm6350.dtsi              | 25 ++++++++++
>  arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 57 ++++++++++++++++++++++-
>  2 files changed, 81 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> index 24bcec3366ef..b267500467f0 100644
> --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> @@ -1686,6 +1686,27 @@ usb_1_qmpphy: phy@...8000 {
>                         #phy-cells = <1>;
>
>                         status = "disabled";
> +
> +                       ports {
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               port@0 {
> +                                       reg = <0>;
> +
> +                                       usb_1_qmpphy_out: endpoint {};
> +                               };
> +
> +                               port@1 {
> +                                       reg = <1>;
> +                               };
> +
> +                               port@2 {
> +                                       reg = <2>;
> +
> +                                       usb_1_qmpphy_dp_in: endpoint {};
> +                               };
> +                       };
>                 };
>
>                 dc_noc: interconnect@...0000 {
> @@ -1861,6 +1882,10 @@ usb_1_dwc3: usb@...0000 {
>                                 snps,hird-threshold = /bits/ 8 <0x10>;
>                                 phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
>                                 phy-names = "usb2-phy", "usb3-phy";
> +
> +                               port {
> +                                       usb_1_role_switch_out: endpoint {};
> +                               };
>                         };
>                 };
>
> diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
> index bc67e8c1fe4d..104f23ec322d 100644
> --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
> +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
> @@ -19,6 +19,7 @@
>  #include <dt-bindings/leds/common.h>
>  #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
>  #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include <dt-bindings/usb/pd.h>
>  #include "sm7225.dtsi"
>  #include "pm6150l.dtsi"
>  #include "pm6350.dtsi"
> @@ -543,6 +544,50 @@ conn-therm@1 {
>         };
>  };
>
> +&pm7250b_typec {
> +       vdd-pdphy-supply = <&vreg_l3a>;
> +
> +       status = "okay";
> +
> +       connector {
> +               compatible = "usb-c-connector";
> +
> +               power-role = "source";
> +               data-role = "dual";
> +               self-powered;
> +
> +               source-pdos = <PDO_FIXED(5000, 1500,
> +                                        PDO_FIXED_DUAL_ROLE |
> +                                        PDO_FIXED_USB_COMM |
> +                                        PDO_FIXED_DATA_SWAP)>;
> +
> +               ports {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       port@0 {
> +                               reg = <0>;
> +                               pm7250b_role_switch_in: endpoint {
> +                                       remote-endpoint = <&usb_1_role_switch_out>;
> +                               };
> +                       };
> +
> +                       port@1 {
> +                               reg = <1>;
> +                               pm7250b_typec_mux_in: endpoint {
> +                                       remote-endpoint = <&usb_1_qmpphy_out>;
> +                               };
> +                       };
> +               };
> +       };
> +};
> +
> +&pm7250b_vbus {
> +       regulator-min-microamp = <500000>;
> +       regulator-max-microamp = <1500000>;
> +       status = "okay";
> +};
> +
>  &pmk8350_rtc {
>         status = "okay";
>  };
> @@ -726,7 +771,12 @@ &usb_1 {
>
>  &usb_1_dwc3 {
>         maximum-speed = "super-speed";
> -       dr_mode = "peripheral";
> +       dr_mode = "otg";
> +       usb-role-switch;
> +};
> +
> +&usb_1_role_switch_out {
> +       remote-endpoint = <&pm7250b_role_switch_in>;
>  };
>
>  &usb_1_hsphy {
> @@ -740,10 +790,15 @@ &usb_1_hsphy {
>  &usb_1_qmpphy {
>         vdda-phy-supply = <&vreg_l22a>;
>         vdda-pll-supply = <&vreg_l16a>;
> +       orientation-switch;
>
>         status = "okay";
>  };
>
> +&usb_1_qmpphy_out {
> +       remote-endpoint = <&pm7250b_typec_mux_in>;
> +};
> +
>  &wifi {
>         vdd-0.8-cx-mx-supply = <&vreg_l4a>;
>         vdd-1.8-xo-supply = <&vreg_l7a>;
>
> --
> 2.44.0
>
>


-- 
With best wishes
Dmitry

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ