| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240325064023.2997-20-adrian.hunter@intel.com>
Date: Mon, 25 Mar 2024 08:40:23 +0200
From: Adrian Hunter <adrian.hunter@...el.com>
To: Thomas Gleixner <tglx@...utronix.de>
Cc: Michael Ellerman <mpe@...erman.id.au>,
Nicholas Piggin <npiggin@...il.com>,
Christophe Leroy <christophe.leroy@...roup.eu>,
"Aneesh Kumar K.V" <aneesh.kumar@...nel.org>,
"Naveen N. Rao" <naveen.n.rao@...ux.ibm.com>,
Heiko Carstens <hca@...ux.ibm.com>,
Vasily Gorbik <gor@...ux.ibm.com>,
Alexander Gordeev <agordeev@...ux.ibm.com>,
Christian Borntraeger <borntraeger@...ux.ibm.com>,
Sven Schnelle <svens@...ux.ibm.com>,
Ingo Molnar <mingo@...hat.com>,
Borislav Petkov <bp@...en8.de>,
Dave Hansen <dave.hansen@...ux.intel.com>,
x86@...nel.org,
"H. Peter Anvin" <hpa@...or.com>,
Andy Lutomirski <luto@...nel.org>,
Vincenzo Frascino <vincenzo.frascino@....com>,
John Stultz <jstultz@...gle.com>,
Stephen Boyd <sboyd@...nel.org>,
Peter Zijlstra <peterz@...radead.org>,
Randy Dunlap <rdunlap@...radead.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Arnd Bergmann <arnd@...db.de>,
Anna-Maria Behnsen <anna-maria@...utronix.de>,
linuxppc-dev@...ts.ozlabs.org,
linux-kernel@...r.kernel.org,
linux-s390@...r.kernel.org
Subject: [PATCH V2 19/19] clocksource: Make watchdog and suspend-timing multiplication overflow safe
Kernel timekeeping is designed to keep the change in cycles (since the last
timer interrupt) below max_cycles, which prevents multiplication overflow
when converting cycles to nanoseconds. However, if timer interrupts stop,
the clocksource_cyc2ns() calculation will eventually overflow.
Add protection against that. Simplify by folding together
clocksource_delta() and clocksource_cyc2ns() into cycles_to_nsec_safe().
Check against max_cycles, falling back to a slower higher precision
calculation.
Suggested-by: Thomas Gleixner <tglx@...utronix.de>
Signed-off-by: Adrian Hunter <adrian.hunter@...el.com>
---
kernel/time/clocksource.c | 42 +++++++++++++++++++--------------------
1 file changed, 20 insertions(+), 22 deletions(-)
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index e5b260aa0e02..4d50d53ac719 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -20,6 +20,16 @@
#include "tick-internal.h"
#include "timekeeping_internal.h"
+static noinline u64 cycles_to_nsec_safe(struct clocksource *cs, u64 start, u64 end)
+{
+ u64 delta = clocksource_delta(end, start, cs->mask);
+
+ if (likely(delta < cs->max_cycles))
+ return clocksource_cyc2ns(delta, cs->mult, cs->shift);
+
+ return mul_u64_u32_shr(delta, cs->mult, cs->shift);
+}
+
/**
* clocks_calc_mult_shift - calculate mult/shift factors for scaled math of clocks
* @mult: pointer to mult variable
@@ -222,8 +232,8 @@ enum wd_read_status {
static enum wd_read_status cs_watchdog_read(struct clocksource *cs, u64 *csnow, u64 *wdnow)
{
unsigned int nretries, max_retries;
- u64 wd_end, wd_end2, wd_delta;
int64_t wd_delay, wd_seq_delay;
+ u64 wd_end, wd_end2;
max_retries = clocksource_get_max_watchdog_retry();
for (nretries = 0; nretries <= max_retries; nretries++) {
@@ -234,9 +244,7 @@ static enum wd_read_status cs_watchdog_read(struct clocksource *cs, u64 *csnow,
wd_end2 = watchdog->read(watchdog);
local_irq_enable();
- wd_delta = clocksource_delta(wd_end, *wdnow, watchdog->mask);
- wd_delay = clocksource_cyc2ns(wd_delta, watchdog->mult,
- watchdog->shift);
+ wd_delay = cycles_to_nsec_safe(watchdog, *wdnow, wd_end);
if (wd_delay <= WATCHDOG_MAX_SKEW) {
if (nretries > 1 || nretries >= max_retries) {
pr_warn("timekeeping watchdog on CPU%d: %s retried %d times before success\n",
@@ -254,8 +262,7 @@ static enum wd_read_status cs_watchdog_read(struct clocksource *cs, u64 *csnow,
* report system busy, reinit the watchdog and skip the current
* watchdog test.
*/
- wd_delta = clocksource_delta(wd_end2, wd_end, watchdog->mask);
- wd_seq_delay = clocksource_cyc2ns(wd_delta, watchdog->mult, watchdog->shift);
+ wd_seq_delay = cycles_to_nsec_safe(watchdog, wd_end, wd_end2);
if (wd_seq_delay > WATCHDOG_MAX_SKEW/2)
goto skip_test;
}
@@ -366,8 +373,7 @@ void clocksource_verify_percpu(struct clocksource *cs)
delta = (csnow_end - csnow_mid) & cs->mask;
if (delta < 0)
cpumask_set_cpu(cpu, &cpus_ahead);
- delta = clocksource_delta(csnow_end, csnow_begin, cs->mask);
- cs_nsec = clocksource_cyc2ns(delta, cs->mult, cs->shift);
+ cs_nsec = cycles_to_nsec_safe(cs, csnow_begin, csnow_end);
if (cs_nsec > cs_nsec_max)
cs_nsec_max = cs_nsec;
if (cs_nsec < cs_nsec_min)
@@ -398,8 +404,8 @@ static inline void clocksource_reset_watchdog(void)
static void clocksource_watchdog(struct timer_list *unused)
{
- u64 csnow, wdnow, cslast, wdlast, delta;
int64_t wd_nsec, cs_nsec, interval;
+ u64 csnow, wdnow, cslast, wdlast;
int next_cpu, reset_pending;
struct clocksource *cs;
enum wd_read_status read_ret;
@@ -456,12 +462,8 @@ static void clocksource_watchdog(struct timer_list *unused)
continue;
}
- delta = clocksource_delta(wdnow, cs->wd_last, watchdog->mask);
- wd_nsec = clocksource_cyc2ns(delta, watchdog->mult,
- watchdog->shift);
-
- delta = clocksource_delta(csnow, cs->cs_last, cs->mask);
- cs_nsec = clocksource_cyc2ns(delta, cs->mult, cs->shift);
+ wd_nsec = cycles_to_nsec_safe(watchdog, cs->wd_last, wdnow);
+ cs_nsec = cycles_to_nsec_safe(cs, cs->cs_last, csnow);
wdlast = cs->wd_last; /* save these in case we print them */
cslast = cs->cs_last;
cs->cs_last = csnow;
@@ -832,7 +834,7 @@ void clocksource_start_suspend_timing(struct clocksource *cs, u64 start_cycles)
*/
u64 clocksource_stop_suspend_timing(struct clocksource *cs, u64 cycle_now)
{
- u64 now, delta, nsec = 0;
+ u64 now, nsec = 0;
if (!suspend_clocksource)
return 0;
@@ -847,12 +849,8 @@ u64 clocksource_stop_suspend_timing(struct clocksource *cs, u64 cycle_now)
else
now = suspend_clocksource->read(suspend_clocksource);
- if (now > suspend_start) {
- delta = clocksource_delta(now, suspend_start,
- suspend_clocksource->mask);
- nsec = mul_u64_u32_shr(delta, suspend_clocksource->mult,
- suspend_clocksource->shift);
- }
+ if (now > suspend_start)
+ nsec = cycles_to_nsec_safe(suspend_clocksource, suspend_start, now);
/*
* Disable the suspend timer to save power if current clocksource is
--
2.34.1
Powered by blists - more mailing lists