[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240326110355.GI403975@kernel.org>
Date: Tue, 26 Mar 2024 11:03:55 +0000
From: Simon Horman <horms@...nel.org>
To: Pawel Dembicki <paweldembicki@...il.com>
Cc: netdev@...r.kernel.org, Linus Walleij <linus.walleij@...aro.org>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Claudiu Manoil <claudiu.manoil@....com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
UNGLinuxDriver@...rochip.com, Russell King <linux@...linux.org.uk>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next v7 07/16] net: dsa: vsc73xx: Add vlan filtering
On Mon, Mar 25, 2024 at 09:43:32PM +0100, Pawel Dembicki wrote:
> This patch implements VLAN filtering for the vsc73xx driver.
>
> After starting VLAN filtering, the switch is reconfigured from QinQ to
> a simple VLAN aware mode. This is required because VSC73XX chips do not
> support inner VLAN tag filtering.
>
> Signed-off-by: Pawel Dembicki <paweldembicki@...il.com>
..
> +static int vsc73xx_port_vlan_add(struct dsa_switch *ds, int port,
> + const struct switchdev_obj_port_vlan *vlan,
> + struct netlink_ext_ack *extack)
> +{
> + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
> + bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
> + struct dsa_port *dp = dsa_to_port(ds, port);
> + enum vsc73xx_port_vlan_conf port_vlan_conf;
> + struct vsc73xx_bridge_vlan *vsc73xx_vlan;
> + struct vsc73xx_vlan_summary summary;
> + struct vsc73xx *vsc = ds->priv;
> + bool operate_on_storage;
> + int ret;
> + u16 vid;
> +
> + /* Be sure to deny alterations to the configuration done by tag_8021q.
> + */
> + if (vid_is_dsa_8021q(vlan->vid)) {
> + NL_SET_ERR_MSG_MOD(extack,
> + "Range 3072-4095 reserved for dsa_8021q operation");
> + return -EBUSY;
> + }
> +
> + /* The processed vlan->vid is excluded from the search because the VLAN
> + * can be re-added with a different set of flags, so it's easiest to
> + * ignore its old flags from the VLAN database software copy.
> + */
> + vsc73xx_bridge_vlan_summary(vsc, port, &summary, vlan->vid);
> +
> + /* VSC73XX allow only three untagged states: none, one or all */
> + if ((untagged && summary.num_tagged > 0 && summary.num_untagged > 0) ||
> + (!untagged && summary.num_untagged > 1)) {
> + NL_SET_ERR_MSG_MOD(extack,
> + "Port can have only none, one or all untagged vlan");
> + return -EBUSY;
> + }
> +
> + vsc73xx_vlan = vsc73xx_bridge_vlan_find(vsc, vlan->vid);
> +
> + if (!vsc73xx_vlan) {
> + vsc73xx_vlan = kzalloc(sizeof(*vsc73xx_vlan), GFP_KERNEL);
> + if (!vsc73xx_vlan)
> + return -ENOMEM;
> +
> + vsc73xx_vlan->vid = vlan->vid;
> + vsc73xx_vlan->portmask = 0;
> + vsc73xx_vlan->untagged = 0;
> +
> + INIT_LIST_HEAD(&vsc73xx_vlan->list);
> + list_add_tail(&vsc73xx_vlan->list, &vsc->vlans);
> + }
> +
> + vsc73xx_vlan->portmask |= BIT(port);
> +
> + if (untagged)
> + vsc73xx_vlan->untagged |= BIT(port);
> + else
> + vsc73xx_vlan->untagged &= ~BIT(port);
> +
> + /* CPU port must be always tagged because port separation is based on
> + * tag_8021q.
> + */
> + if (port == CPU_PORT)
> + goto update_vlan_table;
> +
> + operate_on_storage = vsc73xx_tag_8021q_active(dp);
> +
> + if (pvid)
> + ret = vsc73xx_vlan_set_pvid(vsc, port, vlan->vid,
> + operate_on_storage, false);
> + else if (vsc73xx_port_get_pvid(vsc, port, &vid, false) &&
> + vid == vlan->vid)
> + ret = vsc73xx_vlan_clear_pvid(vsc, port, operate_on_storage,
> + false);
Hi Pawel,
some minor feedback from my side.
If neither of the above conditions immediately above is met,
then ret will be used ininitialised on the line below.
Flagged by clang-17 W=1 build, and Smatch.
> + if (ret)
> + goto err;
..
--
pw-bot: changes-requested
Powered by blists - more mailing lists