| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHUa44H0sV5yYD6b8vb3b=GvFokxC9xgjFFVkj4Dk0YAVm=X7Q@mail.gmail.com>
Date: Thu, 28 Mar 2024 17:09:27 +0100
From: Jens Wiklander <jens.wiklander@...aro.org>
To: Sumit Garg <sumit.garg@...aro.org>
Cc: linux-kernel@...r.kernel.org, linux-mmc@...r.kernel.org,
op-tee@...ts.trustedfirmware.org,
Shyam Saini <shyamsaini@...ux.microsoft.com>, Ulf Hansson <ulf.hansson@...aro.org>,
Jerome Forissier <jerome.forissier@...aro.org>,
Ilias Apalodimas <ilias.apalodimas@...aro.org>, Bart Van Assche <bvanassche@....org>,
Randy Dunlap <rdunlap@...radead.org>, Ard Biesheuvel <ardb@...nel.org>, Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Subject: Re: [PATCH v3 3/3] optee: probe RPMB device using RPMB subsystem
On Fri, Mar 1, 2024 at 11:28 AM Sumit Garg <sumit.garg@...aro.org> wrote:
>
> Hi Jens,
>
> On Tue, 27 Feb 2024 at 21:01, Jens Wiklander <jens.wiklander@...aro.org> wrote:
> >
> > Adds support in the OP-TEE drivers (both SMC and FF-A ABIs) to probe and
> > use an RPMB device via the RPBM subsystem instead of passing the RPMB
>
> s/RPBM/RPMB/
>
> Here are other places too in this patch-set.
>
> > frames via tee-supplicant in user space. A fallback mechanism is kept to
> > route RPMB frames via tee-supplicant if the RPMB subsystem isn't
> > available.
> >
> > The OP-TEE RPC ABI is extended to support iterating over all RPMB
> > devices until one is found with the expected RPMB key already
> > programmed.
>
> I would appreciate it if you could add a link to OP-TEE OS changes in
> the cover-letter although I have found them here [1].
>
> [1] https://github.com/jenswi-linaro/optee_os/commits/rpmb_probe/
OK, I'll add a link in the coverletter of the next patch set.
>
> >
> > Signed-off-by: Jens Wiklander <jens.wiklander@...aro.org>
> > ---
> > drivers/tee/optee/core.c | 55 +++++++
> > drivers/tee/optee/ffa_abi.c | 7 +
> > drivers/tee/optee/optee_private.h | 16 ++
> > drivers/tee/optee/optee_rpc_cmd.h | 35 +++++
> > drivers/tee/optee/rpc.c | 233 ++++++++++++++++++++++++++++++
> > drivers/tee/optee/smc_abi.c | 6 +
> > 6 files changed, 352 insertions(+)
> >
> > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
> > index 3aed554bc8d8..6b32d3e7865b 100644
> > --- a/drivers/tee/optee/core.c
> > +++ b/drivers/tee/optee/core.c
> > @@ -11,6 +11,7 @@
> > #include <linux/io.h>
> > #include <linux/mm.h>
> > #include <linux/module.h>
> > +#include <linux/rpmb.h>
> > #include <linux/slab.h>
> > #include <linux/string.h>
> > #include <linux/tee_drv.h>
> > @@ -80,6 +81,57 @@ void optee_pool_op_free_helper(struct tee_shm_pool *pool, struct tee_shm *shm,
> > shm->pages = NULL;
> > }
> >
> > +static void optee_rpmb_scan(struct work_struct *work)
> > +{
> > + struct optee *optee = container_of(work, struct optee, scan_rpmb_work);
> > + bool scan_done = false;
> > + u32 res;
> > +
> > + do {
> > + mutex_lock(&optee->rpmb_dev_mutex);
> > + /* No need to rescan if we haven't started scanning yet */
> > + optee->rpmb_dev_request_rescan = false;
> > + mutex_unlock(&optee->rpmb_dev_mutex);
> > +
> > + res = optee_enumerate_devices(PTA_CMD_GET_DEVICES_RPMB);
> > + if (res && res != TEE_ERROR_STORAGE_NOT_AVAILABLE)
>
> I suppose this hasn't been tested for a negative case since
> optee_enumerate_devices() won't return this error code (see [2]).
> However, I would prefer to use GP Client error code:
> TEEC_ERROR_ITEM_NOT_FOUND here instead.
>
> [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/tee/optee/device.c#n43
I prefer TEE_ERROR_STORAGE_NOT_AVAILABLE since that's the code GP says
a TA should get when storage is unavailable.
TEEC_ERROR_ITEM_NOT_FOUND is less specific. Anyway, I'll need to
translate the code in get_devices().
>
> > + pr_info("Scanning for RPMB device: res %#x\n", res);
> > +
> > + mutex_lock(&optee->rpmb_dev_mutex);
> > + /*
> > + * If another RPMB device came online while scanning, scan one
> > + * more time, unless we have already found an RPBM device.
> > + */
> > + scan_done = (optee->rpmb_dev ||
>
> I suppose we don't need to check for optee->rpmb_dev here since a
> successful return from
> optee_enumerate_devices(PTA_CMD_GET_DEVICES_RPMB) would ensure that
> the RPMB device has been found.
That makes sense, I'll check the return value instead.
>
> > + !optee->rpmb_dev_request_rescan);
> > + optee->rpmb_dev_request_rescan = false;
> > + optee->rpmb_dev_scan_in_progress = !scan_done;
> > + mutex_unlock(&optee->rpmb_dev_mutex);
> > + } while (!scan_done);
> > +}
> > +
> > +void optee_rpmb_intf_add_rdev(struct rpmb_interface *intf,
> > + struct rpmb_dev *rdev)
> > +{
> > + struct optee *optee = container_of(intf, struct optee, rpmb_intf);
> > + bool queue_work = true;
> > +
> > + mutex_lock(&optee->rpmb_dev_mutex);
> > + if (optee->rpmb_dev || optee->rpmb_dev_scan_in_progress) {
>
> Can we use work_pending() instead of our custom
> optee->rpmb_dev_scan_in_progress flag?
That seems racy, or am I missing something?
>
> > + queue_work = false;
> > + if (optee->rpmb_dev_scan_in_progress)
> > + optee->rpmb_dev_request_rescan = true;
> > + }
> > + if (queue_work)
> > + optee->rpmb_dev_scan_in_progress = true;
> > + mutex_unlock(&optee->rpmb_dev_mutex);
> > +
> > + if (queue_work) {
> > + INIT_WORK(&optee->scan_rpmb_work, optee_rpmb_scan);
> > + schedule_work(&optee->scan_rpmb_work);
>
> Can we reuse optee->scan_bus_work rather than introducing a new one here?
No, both may be active at the same time. We'd have to merge
optee_rpmb_scan() and optee_bus_scan(), but I'm not sure it's worth
it.
>
> > + }
> > +}
> > +
> > static void optee_bus_scan(struct work_struct *work)
> > {
> > WARN_ON(optee_enumerate_devices(PTA_CMD_GET_DEVICES_SUPP));
> > @@ -161,6 +213,7 @@ void optee_release_supp(struct tee_context *ctx)
> >
> > void optee_remove_common(struct optee *optee)
> > {
> > + rpmb_interface_unregister(&optee->rpmb_intf);
> > /* Unregister OP-TEE specific client devices on TEE bus */
> > optee_unregister_devices();
> >
> > @@ -177,6 +230,8 @@ void optee_remove_common(struct optee *optee)
> > tee_shm_pool_free(optee->pool);
> > optee_supp_uninit(&optee->supp);
> > mutex_destroy(&optee->call_queue.mutex);
> > + rpmb_dev_put(optee->rpmb_dev);
> > + mutex_destroy(&optee->rpmb_dev_mutex);
> > }
> >
> > static int smc_abi_rc;
> > diff --git a/drivers/tee/optee/ffa_abi.c b/drivers/tee/optee/ffa_abi.c
> > index ecb5eb079408..befe19ecc30a 100644
> > --- a/drivers/tee/optee/ffa_abi.c
> > +++ b/drivers/tee/optee/ffa_abi.c
> > @@ -7,6 +7,7 @@
> >
> > #include <linux/arm_ffa.h>
> > #include <linux/errno.h>
> > +#include <linux/rpmb.h>
> > #include <linux/scatterlist.h>
> > #include <linux/sched.h>
> > #include <linux/slab.h>
> > @@ -934,6 +935,7 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
> > optee_cq_init(&optee->call_queue, 0);
> > optee_supp_init(&optee->supp);
> > optee_shm_arg_cache_init(optee, arg_cache_flags);
> > + mutex_init(&optee->rpmb_dev_mutex);
> > ffa_dev_set_drvdata(ffa_dev, optee);
> > ctx = teedev_open(optee->teedev);
> > if (IS_ERR(ctx)) {
> > @@ -955,6 +957,8 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
> > if (rc)
> > goto err_unregister_devices;
> >
> > + optee->rpmb_intf.add_rdev = optee_rpmb_intf_add_rdev;
> > + rpmb_interface_register(&optee->rpmb_intf);
> > pr_info("initialized driver\n");
> > return 0;
> >
> > @@ -968,6 +972,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
> > teedev_close_context(ctx);
> > err_rhashtable_free:
> > rhashtable_free_and_destroy(&optee->ffa.global_ids, rh_free_fn, NULL);
> > + rpmb_dev_put(optee->rpmb_dev);
> > + mutex_destroy(&optee->rpmb_dev_mutex);
> > + rpmb_interface_unregister(&optee->rpmb_intf);
> > optee_supp_uninit(&optee->supp);
> > mutex_destroy(&optee->call_queue.mutex);
> > mutex_destroy(&optee->ffa.mutex);
> > diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
> > index 7a5243c78b55..1e4c33baef43 100644
> > --- a/drivers/tee/optee/optee_private.h
> > +++ b/drivers/tee/optee/optee_private.h
> > @@ -8,6 +8,7 @@
> >
> > #include <linux/arm-smccc.h>
> > #include <linux/rhashtable.h>
> > +#include <linux/rpmb.h>
> > #include <linux/semaphore.h>
> > #include <linux/tee_drv.h>
> > #include <linux/types.h>
> > @@ -20,11 +21,13 @@
> > /* Some Global Platform error codes used in this driver */
> > #define TEEC_SUCCESS 0x00000000
> > #define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006
> > +#define TEEC_ERROR_ITEM_NOT_FOUND 0xFFFF0008
> > #define TEEC_ERROR_NOT_SUPPORTED 0xFFFF000A
> > #define TEEC_ERROR_COMMUNICATION 0xFFFF000E
> > #define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C
> > #define TEEC_ERROR_BUSY 0xFFFF000D
> > #define TEEC_ERROR_SHORT_BUFFER 0xFFFF0010
> > +#define TEE_ERROR_STORAGE_NOT_AVAILABLE 0xF0100003
> >
> > #define TEEC_ORIGIN_COMMS 0x00000002
> >
> > @@ -197,6 +200,8 @@ struct optee_ops {
> > * @notif: notification synchronization struct
> > * @supp: supplicant synchronization struct for RPC to supplicant
> > * @pool: shared memory pool
> > + * @mutex: mutex protecting @rpmb_dev
> > + * @rpmb_dev: current RPMB device or NULL
> > * @rpc_param_count: If > 0 number of RPC parameters to make room for
> > * @scan_bus_done flag if device registation was already done.
> > * @scan_bus_work workq to scan optee bus and register optee drivers
> > @@ -215,9 +220,17 @@ struct optee {
> > struct optee_notif notif;
> > struct optee_supp supp;
> > struct tee_shm_pool *pool;
> > + /* Protects rpmb_dev pointer and rpmb_dev_* */
> > + struct mutex rpmb_dev_mutex;
>
> Given my comments above, do we really need this mutex?
I don't see how we can do without the mutex.
>
> > + struct rpmb_dev *rpmb_dev;
> > + bool rpmb_dev_scan_in_progress;
> > + bool rpmb_dev_request_rescan;
> > + bool rpmb_dev_scan_done;
>
> Left over, should it be dropped?
Thanks, I'll remove it.
>
> > + struct rpmb_interface rpmb_intf;
> > unsigned int rpc_param_count;
> > bool scan_bus_done;
> > struct work_struct scan_bus_work;
> > + struct work_struct scan_rpmb_work;
> > };
> >
> > struct optee_session {
> > @@ -280,8 +293,11 @@ int optee_cancel_req(struct tee_context *ctx, u32 cancel_id, u32 session);
> >
> > #define PTA_CMD_GET_DEVICES 0x0
> > #define PTA_CMD_GET_DEVICES_SUPP 0x1
> > +#define PTA_CMD_GET_DEVICES_RPMB 0x2
> > int optee_enumerate_devices(u32 func);
> > void optee_unregister_devices(void);
> > +void optee_rpmb_intf_add_rdev(struct rpmb_interface *intf,
> > + struct rpmb_dev *rdev);
> >
> > int optee_pool_op_alloc_helper(struct tee_shm_pool *pool, struct tee_shm *shm,
> > size_t size, size_t align,
> > diff --git a/drivers/tee/optee/optee_rpc_cmd.h b/drivers/tee/optee/optee_rpc_cmd.h
> > index f3f06e0994a7..f351a8ac69fc 100644
> > --- a/drivers/tee/optee/optee_rpc_cmd.h
> > +++ b/drivers/tee/optee/optee_rpc_cmd.h
> > @@ -16,6 +16,14 @@
> > * and sends responses.
> > */
> >
> > +/*
> > + * Replay Protected Memory Block access
> > + *
> > + * [in] memref[0] Frames to device
> > + * [out] memref[1] Frames from device
> > + */
> > +#define OPTEE_RPC_CMD_RPMB 1
> > +
> > /*
> > * Get time
> > *
> > @@ -103,4 +111,31 @@
> > /* I2C master control flags */
> > #define OPTEE_RPC_I2C_FLAGS_TEN_BIT BIT(0)
> >
> > +/*
> > + * Reset RPMB probing
> > + *
> > + * Releases an eventually already used RPMB devices and starts over searching
> > + * for RPMB devices. Returns the kind of shared memory to use in subsequent
> > + * OPTEE_RPC_CMD_RPMB_PROBE_NEXT and OPTEE_RPC_CMD_RPMB calls.
> > + *
> > + * [out] value[0].a OPTEE_RPC_SHM_TYPE_*, the parameter for
> > + * OPTEE_RPC_CMD_SHM_ALLOC
> > + */
> > +#define OPTEE_RPC_CMD_RPMB_PROBE_RESET 22
> > +
> > +/*
> > + * Probe next RPMB device
> > + *
> > + * [out] value[0].a Type of RPMB device, OPTEE_RPC_RPMB_*
> > + * [out] value[0].b EXT CSD-slice 168 "RPMB Size"
> > + * [out] value[0].c EXT CSD-slice 222 "Reliable Write Sector Count"
> > + * [out] memref[1] Buffer with the raw CID
> > + */
> > +#define OPTEE_RPC_CMD_RPMB_PROBE_NEXT 23
> > +
> > +/* Type of RPMB device */
> > +#define OPTEE_RPC_RPMB_EMMC 0
> > +#define OPTEE_RPC_RPMB_UFS 1
> > +#define OPTEE_RPC_RPMB_NVME 2
> > +
> > #endif /*__OPTEE_RPC_CMD_H*/
> > diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c
> > index e69bc6380683..97f69a108f61 100644
> > --- a/drivers/tee/optee/rpc.c
> > +++ b/drivers/tee/optee/rpc.c
> > @@ -7,6 +7,7 @@
> >
> > #include <linux/delay.h>
> > #include <linux/i2c.h>
> > +#include <linux/rpmb.h>
> > #include <linux/slab.h>
> > #include <linux/tee_drv.h>
> > #include "optee_private.h"
> > @@ -255,6 +256,229 @@ void optee_rpc_cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm)
> > optee_supp_thrd_req(ctx, OPTEE_RPC_CMD_SHM_FREE, 1, ¶m);
> > }
> >
> > +static void handle_rpc_func_rpmb_probe_reset(struct tee_context *ctx,
> > + struct optee *optee,
> > + struct optee_msg_arg *arg)
> > +{
> > + struct tee_param params[1];
> > +
> > + if (!IS_ENABLED(CONFIG_RPMB)) {
> > + handle_rpc_supp_cmd(ctx, optee, arg);
> > + return;
> > + }
> > +
> > + if (arg->num_params != ARRAY_SIZE(params) ||
> > + optee->ops->from_msg_param(optee, params, arg->num_params,
> > + arg->params) ||
> > + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT) {
> > + arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> > + return;
> > + }
> > +
> > + params[0].u.value.a = OPTEE_RPC_SHM_TYPE_KERNEL;
> > + params[0].u.value.b = 0;
> > + params[0].u.value.c = 0;
> > + if (optee->ops->to_msg_param(optee, arg->params,
> > + arg->num_params, params)) {
> > + arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> > + return;
> > + }
> > +
> > + mutex_lock(&optee->rpmb_dev_mutex);
> > + rpmb_dev_put(optee->rpmb_dev);
> > + optee->rpmb_dev = NULL;
> > + mutex_unlock(&optee->rpmb_dev_mutex);
> > +
> > + arg->ret = TEEC_SUCCESS;
> > +}
> > +
> > +static int rpmb_type_to_rpc_type(enum rpmb_type rtype)
> > +{
> > + switch (rtype) {
> > + case RPMB_TYPE_EMMC:
> > + return OPTEE_RPC_RPMB_EMMC;
> > + case RPMB_TYPE_UFS:
> > + return OPTEE_RPC_RPMB_UFS;
> > + case RPMB_TYPE_NVME:
> > + return OPTEE_RPC_RPMB_NVME;
> > + default:
> > + return -1;
> > + }
> > +}
> > +
> > +static int rpc_rpmb_match(struct rpmb_dev *rdev, const void *data)
> > +{
> > + return rpmb_type_to_rpc_type(rdev->ops->type) >= 0;
> > +}
> > +
> > +static void handle_rpc_func_rpmb_probe_next(struct tee_context *ctx,
> > + struct optee *optee,
> > + struct optee_msg_arg *arg)
> > +{
> > + struct rpmb_dev *rdev;
> > + struct tee_param params[2];
> > + void *buf;
> > +
> > + if (!IS_ENABLED(CONFIG_RPMB)) {
>
> What if the RPMB driver is built as a module? IS_REACHABLE() instead?
OK, I'll update.
Thanks,
Jens
>
> -Sumit
>
> > + handle_rpc_supp_cmd(ctx, optee, arg);
> > + return;
> > + }
> > +
> > + if (arg->num_params != ARRAY_SIZE(params) ||
> > + optee->ops->from_msg_param(optee, params, arg->num_params,
> > + arg->params) ||
> > + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT ||
> > + params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) {
> > + arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> > + return;
> > + }
> > + buf = tee_shm_get_va(params[1].u.memref.shm,
> > + params[1].u.memref.shm_offs);
> > + if (!buf) {
> > + arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> > + return;
> > + }
> > +
> > + mutex_lock(&optee->rpmb_dev_mutex);
> > + rdev = rpmb_dev_find_device(NULL, optee->rpmb_dev, rpc_rpmb_match);
> > + rpmb_dev_put(optee->rpmb_dev);
> > + optee->rpmb_dev = rdev;
> > + mutex_unlock(&optee->rpmb_dev_mutex);
> > +
> > + if (!rdev) {
> > + arg->ret = TEEC_ERROR_ITEM_NOT_FOUND;
> > + return;
> > + }
> > +
> > + if (params[1].u.memref.size < rdev->dev_id_len) {
> > + arg->ret = TEEC_ERROR_SHORT_BUFFER;
> > + return;
> > + }
> > + memcpy(buf, rdev->dev_id, rdev->dev_id_len);
> > + params[1].u.memref.size = rdev->dev_id_len;
> > + params[0].u.value.a = rpmb_type_to_rpc_type(rdev->ops->type);
> > + params[0].u.value.b = rdev->capacity;
> > + params[0].u.value.c = rdev->reliable_wr_count;
> > + if (optee->ops->to_msg_param(optee, arg->params,
> > + arg->num_params, params)) {
> > + arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> > + return;
> > + }
> > +
> > + arg->ret = TEEC_SUCCESS;
> > +}
> > +
> > +/* Request */
> > +struct rpmb_req {
> > + u16 cmd;
> > +#define RPMB_CMD_DATA_REQ 0x00
> > +#define RPMB_CMD_GET_DEV_INFO 0x01
> > + u16 dev_id;
> > + u16 block_count;
> > + /* Optional data frames (rpmb_data_frame) follow */
> > +};
> > +
> > +#define RPMB_REQ_DATA(req) ((void *)((struct rpmb_req *)(req) + 1))
> > +
> > +#define RPMB_CID_SZ 16
> > +
> > +/* Response to device info request */
> > +struct rpmb_dev_info {
> > + u8 cid[RPMB_CID_SZ];
> > + u8 rpmb_size_mult; /* EXT CSD-slice 168: RPMB Size */
> > + u8 rel_wr_sec_c; /* EXT CSD-slice 222: Reliable Write Sector */
> > + /* Count */
> > + u8 ret_code;
> > +#define RPMB_CMD_GET_DEV_INFO_RET_OK 0x00
> > +#define RPMB_CMD_GET_DEV_INFO_RET_ERROR 0x01
> > +};
> > +
> > +static int get_dev_info(struct rpmb_dev *rdev, void *rsp, size_t rsp_size)
> > +{
> > + struct rpmb_dev_info *dev_info;
> > +
> > + if (rsp_size != sizeof(*dev_info))
> > + return TEEC_ERROR_BAD_PARAMETERS;
> > +
> > + dev_info = rsp;
> > + memcpy(dev_info->cid, rdev->dev_id, sizeof(dev_info->cid));
> > + dev_info->rpmb_size_mult = rdev->capacity;
> > + dev_info->rel_wr_sec_c = rdev->reliable_wr_count;
> > + dev_info->ret_code = RPMB_CMD_GET_DEV_INFO_RET_OK;
> > +
> > + return TEEC_SUCCESS;
> > +}
> > +
> > +/*
> > + * req is one struct rpmb_req followed by one or more struct rpmb_data_frame
> > + * rsp is either one struct rpmb_dev_info or one or more struct rpmb_data_frame
> > + */
> > +static u32 rpmb_process_request(struct optee *optee, struct rpmb_dev *rdev,
> > + void *req, size_t req_size,
> > + void *rsp, size_t rsp_size)
> > +{
> > + struct rpmb_req *sreq = req;
> > + int rc;
> > +
> > + if (req_size < sizeof(*sreq))
> > + return TEEC_ERROR_BAD_PARAMETERS;
> > +
> > + switch (sreq->cmd) {
> > + case RPMB_CMD_DATA_REQ:
> > + rc = rpmb_route_frames(rdev, RPMB_REQ_DATA(req),
> > + req_size - sizeof(struct rpmb_req),
> > + rsp, rsp_size);
> > + if (rc)
> > + return TEEC_ERROR_BAD_PARAMETERS;
> > + return TEEC_SUCCESS;
> > + case RPMB_CMD_GET_DEV_INFO:
> > + return get_dev_info(rdev, rsp, rsp_size);
> > + default:
> > + return TEEC_ERROR_BAD_PARAMETERS;
> > + }
> > +}
> > +
> > +static void handle_rpc_func_rpmb(struct tee_context *ctx, struct optee *optee,
> > + struct optee_msg_arg *arg)
> > +{
> > + struct tee_param params[2];
> > + struct rpmb_dev *rdev;
> > + void *p0, *p1;
> > +
> > + mutex_lock(&optee->rpmb_dev_mutex);
> > + rdev = rpmb_dev_get(optee->rpmb_dev);
> > + mutex_unlock(&optee->rpmb_dev_mutex);
> > + if (!rdev) {
> > + handle_rpc_supp_cmd(ctx, optee, arg);
> > + return;
> > + }
> > +
> > + if (arg->num_params != ARRAY_SIZE(params) ||
> > + optee->ops->from_msg_param(optee, params, arg->num_params,
> > + arg->params) ||
> > + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT ||
> > + params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) {
> > + arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> > + goto out;
> > + }
> > +
> > + p0 = tee_shm_get_va(params[0].u.memref.shm,
> > + params[0].u.memref.shm_offs);
> > + p1 = tee_shm_get_va(params[1].u.memref.shm,
> > + params[1].u.memref.shm_offs);
> > + arg->ret = rpmb_process_request(optee, rdev, p0,
> > + params[0].u.memref.size,
> > + p1, params[1].u.memref.size);
> > + if (arg->ret)
> > + goto out;
> > +
> > + if (optee->ops->to_msg_param(optee, arg->params,
> > + arg->num_params, params))
> > + arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> > +out:
> > + rpmb_dev_put(rdev);
> > +}
> > +
> > void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee,
> > struct optee_msg_arg *arg)
> > {
> > @@ -271,6 +495,15 @@ void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee,
> > case OPTEE_RPC_CMD_I2C_TRANSFER:
> > handle_rpc_func_cmd_i2c_transfer(ctx, arg);
> > break;
> > + case OPTEE_RPC_CMD_RPMB_PROBE_RESET:
> > + handle_rpc_func_rpmb_probe_reset(ctx, optee, arg);
> > + break;
> > + case OPTEE_RPC_CMD_RPMB_PROBE_NEXT:
> > + handle_rpc_func_rpmb_probe_next(ctx, optee, arg);
> > + break;
> > + case OPTEE_RPC_CMD_RPMB:
> > + handle_rpc_func_rpmb(ctx, optee, arg);
> > + break;
> > default:
> > handle_rpc_supp_cmd(ctx, optee, arg);
> > }
> > diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c
> > index a37f87087e5c..8da53f41b052 100644
> > --- a/drivers/tee/optee/smc_abi.c
> > +++ b/drivers/tee/optee/smc_abi.c
> > @@ -20,6 +20,7 @@
> > #include <linux/of_irq.h>
> > #include <linux/of_platform.h>
> > #include <linux/platform_device.h>
> > +#include <linux/rpmb.h>
> > #include <linux/sched.h>
> > #include <linux/slab.h>
> > #include <linux/string.h>
> > @@ -1715,6 +1716,7 @@ static int optee_probe(struct platform_device *pdev)
> > optee->smc.memremaped_shm = memremaped_shm;
> > optee->pool = pool;
> > optee_shm_arg_cache_init(optee, arg_cache_flags);
> > + mutex_init(&optee->rpmb_dev_mutex);
> >
> > platform_set_drvdata(pdev, optee);
> > ctx = teedev_open(optee->teedev);
> > @@ -1769,6 +1771,8 @@ static int optee_probe(struct platform_device *pdev)
> > if (rc)
> > goto err_disable_shm_cache;
> >
> > + optee->rpmb_intf.add_rdev = optee_rpmb_intf_add_rdev;
> > + rpmb_interface_register(&optee->rpmb_intf);
> > pr_info("initialized driver\n");
> > return 0;
> >
> > @@ -1782,6 +1786,8 @@ static int optee_probe(struct platform_device *pdev)
> > err_close_ctx:
> > teedev_close_context(ctx);
> > err_supp_uninit:
> > + rpmb_dev_put(optee->rpmb_dev);
> > + mutex_destroy(&optee->rpmb_dev_mutex);
> > optee_shm_arg_cache_uninit(optee);
> > optee_supp_uninit(&optee->supp);
> > mutex_destroy(&optee->call_queue.mutex);
> > --
> > 2.34.1
> >
Powered by blists - more mailing lists