Date: Mon, 8 Apr 2024 14:31:26 +0300
From: "naamax.meir" <naamax.meir@...ux.intel.com>
To: Song Yoong Siang <yoong.siang.song@...el.com>,
 Jesse Brandeburg <jesse.brandeburg@...el.com>,
 Tony Nguyen <anthony.l.nguyen@...el.com>,
 "David S . Miller" <davem@...emloft.net>, Eric Dumazet
 <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
 Paolo Abeni <pabeni@...hat.com>, Richard Cochran <richardcochran@...il.com>,
 Alexei Starovoitov <ast@...nel.org>, Daniel Borkmann <daniel@...earbox.net>,
 Jesper Dangaard Brouer <hawk@...nel.org>,
 John Fastabend <john.fastabend@...il.com>,
 Stanislav Fomichev <sdf@...gle.com>,
 Vinicius Costa Gomes <vinicius.gomes@...el.com>,
 Florian Bezdeka <florian.bezdeka@...mens.com>,
 Kurt Kanzenbach <kurt@...utronix.de>,
 Maciej Fijalkowski <maciej.fijalkowski@...el.com>
Cc: netdev@...r.kernel.org, bpf@...r.kernel.org, xdp-hints@...-project.net,
 intel-wired-lan@...ts.osuosl.org, linux-kernel@...r.kernel.org
Subject: Re: [Intel-wired-lan] [PATCH iwl-next, v4 1/1] igc: Add Tx hardware
 timestamp request for AF_XDP zero-copy packet

On 3/25/2024 04:09, Song Yoong Siang wrote:
> This patch adds support to per-packet Tx hardware timestamp request to
> AF_XDP zero-copy packet via XDP Tx metadata framework. Please note that
> user needs to enable Tx HW timestamp capability via igc_ioctl() with
> SIOCSHWTSTAMP cmd before sending xsk Tx hardware timestamp request.
> 
> Same as implementation in RX timestamp XDP hints kfunc metadata, Timer 0
> (adjustable clock) is used in xsk Tx hardware timestamp. i225/i226 have
> four sets of timestamping registers. *skb and *xsk_tx_buffer pointers
> are used to indicate whether the timestamping register is already occupied.
> 
> Furthermore, a boolean variable named xsk_pending_ts is used to hold the
> transmit completion until the tx hardware timestamp is ready. This is
> because, for i225/i226, the timestamp notification event comes some time
> after the transmit completion event. The driver will retrigger hardware irq
> to clean the packet after retrieve the tx hardware timestamp.
> 
> Besides, xsk_meta is added into struct igc_tx_timestamp_request as a hook
> to the metadata location of the transmit packet. When the Tx timestamp
> interrupt is fired, the interrupt handler will copy the value of Tx hwts
> into metadata location via xsk_tx_metadata_complete().
> 
> This patch is tested with tools/testing/selftests/bpf/xdp_hw_metadata
> on Intel ADL-S platform. Below are the test steps and results.
> 
> Test Step 1: Run xdp_hw_metadata app
>   ./xdp_hw_metadata <iface> > /dev/shm/result.log
> 
> Test Step 2: Enable Tx hardware timestamp
>   hwstamp_ctl -i <iface> -t 1 -r 1
> 
> Test Step 3: Run ptp4l and phc2sys for time synchronization
> 
> Test Step 4: Generate UDP packets with 1ms interval for 10s
>   trafgen --dev <iface> '{eth(da=<addr>), udp(dp=9091)}' -t 1ms -n 10000
> 
> Test Step 5: Rerun Step 1-3 with 10s iperf3 as background traffic
> 
> Test Step 6: Rerun Step 1-4 with 10s iperf3 as background traffic
> 
> Based on iperf3 results below, the impact of holding tx completion to
> throughput is not observable.
> 
> Result of last UDP packet (no. 10000) in Step 4:
> poll: 1 (0) skip=99 fail=0 redir=10000
> xsk_ring_cons__peek: 1
> 0x5640a37972d0: rx_desc[9999]->addr=f2110 addr=f2110 comp_addr=f2110 EoP
> rx_hash: 0x2049BE1D with RSS type:0x1
> HW RX-time:   1679819246792971268 (sec:1679819246.7930) delta to User RX-time sec:0.0000 (14.990 usec)
> XDP RX-time:   1679819246792981987 (sec:1679819246.7930) delta to User RX-time sec:0.0000 (4.271 usec)
> No rx_vlan_tci or rx_vlan_proto, err=-95
> 0x5640a37972d0: ping-pong with csum=ab19 (want 315b) csum_start=34 csum_offset=6
> 0x5640a37972d0: complete tx idx=9999 addr=f010
> HW TX-complete-time:   1679819246793036971 (sec:1679819246.7930) delta to User TX-complete-time sec:0.0001 (77.656 usec)
> XDP RX-time:   1679819246792981987 (sec:1679819246.7930) delta to User TX-complete-time sec:0.0001 (132.640 usec)
> HW RX-time:   1679819246792971268 (sec:1679819246.7930) delta to HW TX-complete-time sec:0.0001 (65.703 usec)
> 0x5640a37972d0: complete rx idx=10127 addr=f2110
> 
> Result of iperf3 without tx hwts request in step 5:
> [ ID] Interval           Transfer     Bitrate         Retr
> [  5]   0.00-10.00  sec  2.74 GBytes  2.36 Gbits/sec    0             sender
> [  5]   0.00-10.05  sec  2.74 GBytes  2.34 Gbits/sec                  receiver
> 
> Result of iperf3 running parallel with trafgen command in step 6:
> [ ID] Interval           Transfer     Bitrate         Retr
> [  5]   0.00-10.00  sec  2.74 GBytes  2.36 Gbits/sec    0             sender
> [  5]   0.00-10.04  sec  2.74 GBytes  2.34 Gbits/sec                  receiver
> 
> Co-developed-by: Lai Peter Jun Ann <jun.ann.lai@...el.com>
> Signed-off-by: Lai Peter Jun Ann <jun.ann.lai@...el.com>
> Signed-off-by: Song Yoong Siang <yoong.siang.song@...el.com>
> Acked-by: John Fastabend <john.fastabend@...il.com>
> ---
> V1: https://patchwork.kernel.org/project/netdevbpf/patch/20231215162158.951925-1-yoong.siang.song@intel.com/
> V2: https://patchwork.kernel.org/project/netdevbpf/cover/20240301162348.898619-1-yoong.siang.song@intel.com/
> V3: https://patchwork.kernel.org/project/netdevbpf/cover/20240303083225.1184165-1-yoong.siang.song@intel.com/
> 
> changelog:
> V1 -> V2
> - In struct igc_tx_timestamp_request, keep a pointer to igc_tx_buffer,
>    instead of pointing xsk_pending_ts (Vinicius).
> - In struct igc_tx_timestamp_request, introduce buffer_type to indicate
>    whether skb or igc_tx_buffer pointer should be use (Vinicius).
> - In struct igc_metadata_request, remove igc_adapter pointer (Vinicius).
> - When request tx hwts, copy the value of cmd_type, instead of using
>    pointer (Vinicius).
> - For boolean variable, use true and false, instead of 1 and 0 (Vinicius).
> - In igc_xsk_request_timestamp(), make an early return if none of the 4 ts
>    registers is available (Vinicius).
> - Create helper functions to clear tx buffer and skb for tstamp (John).
> - Perform throughput test with mix traffic (Vinicius & John).
> V2 -> V3
> - Improve tstamp reg searching loop for better readability (John).
> - In igc_ptp_free_tx_buffer(), add comment to inform user that
>    tstamp->xsk_tx_buffer and tstamp->skb are in union (John).
> V3 -> V4
> - Add protection with xp_tx_metadata_enabled (Kurt & Maciej).
> ---
> ---
>   drivers/net/ethernet/intel/igc/igc.h      |  71 ++++++++------
>   drivers/net/ethernet/intel/igc/igc_main.c | 113 ++++++++++++++++++++--
>   drivers/net/ethernet/intel/igc/igc_ptp.c  |  51 ++++++++--
>   3 files changed, 195 insertions(+), 40 deletions(-)

Tested-by: Naama Meir <naamax.meir@...ux.intel.com>

Powered by blists - more mailing lists