| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAA8EJpp=K11+U=FeMhscaRAG1k_Zo39faw8JGerdgGj67MhJmw@mail.gmail.com>
Date: Fri, 12 Apr 2024 14:35:50 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Fenglin Wu <quic_fenglinw@...cinc.com>
Cc: kernel@...cinc.com, Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>, Konrad Dybcio <konrad.dybcio@...aro.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, linux-arm-msm@...r.kernel.org,
linux-input@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH v9 4/4] input: pm8xxx-vibrator: add new SPMI vibrator support
On Fri, 12 Apr 2024 at 07:05, Fenglin Wu <quic_fenglinw@...cinc.com> wrote:
>
>
>
> On 4/11/2024 10:21 PM, Dmitry Baryshkov wrote:
> > On Thu, 11 Apr 2024 at 16:51, Fenglin Wu <quic_fenglinw@...cinc.com> wrote:
> >>
> >>
> >>
> >> On 2024/4/11 19:02, Dmitry Baryshkov wrote:
> >>> On Thu, 11 Apr 2024 at 11:32, Fenglin Wu via B4 Relay
> >>> <devnull+quic_fenglinw.quicinc.com@...nel.org> wrote:
> >>>>
> >>>> From: Fenglin Wu <quic_fenglinw@...cinc.com>
> >>>>
> >>>> Add support for a new SPMI vibrator module which is very similar
> >>>> to the vibrator module inside PM8916 but has a finer drive voltage
> >>>> step and different output voltage range, its drive level control
> >>>> is expanded across 2 registers. The vibrator module can be found
> >>>> in following Qualcomm PMICs: PMI632, PM7250B, PM7325B, PM7550BA.
> >>>>
> >>>> Signed-off-by: Fenglin Wu <quic_fenglinw@...cinc.com>
> >>>> ---
> >>>> drivers/input/misc/pm8xxx-vibrator.c | 51 +++++++++++++++++++++++++++++-------
> >>>> 1 file changed, 42 insertions(+), 9 deletions(-)
> >>>>
> >>>> diff --git a/drivers/input/misc/pm8xxx-vibrator.c b/drivers/input/misc/pm8xxx-vibrator.c
> >>>> index 2959edca8eb9..35bb6f450fd2 100644
> >>>> --- a/drivers/input/misc/pm8xxx-vibrator.c
> >>>> +++ b/drivers/input/misc/pm8xxx-vibrator.c
> >>>> @@ -12,10 +12,10 @@
> >>>> #include <linux/regmap.h>
> >>>> #include <linux/slab.h>
> >>>>
> >>>> -#define VIB_MAX_LEVEL_mV (3100)
> >>>> -#define VIB_MIN_LEVEL_mV (1200)
> >>>> -#define VIB_PER_STEP_mV (100)
> >>>> -#define VIB_MAX_LEVELS (VIB_MAX_LEVEL_mV - VIB_MIN_LEVEL_mV + VIB_PER_STEP_mV)
> >>>> +#define VIB_MAX_LEVEL_mV(vib) (vib->drv2_addr ? 3544 : 3100)
> >>>> +#define VIB_MIN_LEVEL_mV(vib) (vib->drv2_addr ? 1504 : 1200)
> >>>> +#define VIB_PER_STEP_mV(vib) (vib->drv2_addr ? 8 : 100)
> >>>> +#define VIB_MAX_LEVELS(vib) (VIB_MAX_LEVEL_mV(vib) - VIB_MIN_LEVEL_mV(vib) + VIB_PER_STEP_mV(vib))
> >>>>
> >>>> #define MAX_FF_SPEED 0xff
> >>>>
> >>>> @@ -26,6 +26,9 @@ struct pm8xxx_regs {
> >>>> unsigned int drv_offset;
> >>>> unsigned int drv_mask;
> >>>> unsigned int drv_shift;
> >>>> + unsigned int drv2_offset;
> >>>> + unsigned int drv2_mask;
> >>>> + unsigned int drv2_shift;
> >>>> unsigned int drv_en_manual_mask;
> >>>> };
> >>>>
> >>>> @@ -45,6 +48,18 @@ static struct pm8xxx_regs pm8916_regs = {
> >>>> .drv_en_manual_mask = 0,
> >>>> };
> >>>>
> >>>> +static struct pm8xxx_regs pmi632_regs = {
> >>>> + .enable_offset = 0x46,
> >>>> + .enable_mask = BIT(7),
> >>>> + .drv_offset = 0x40,
> >>>> + .drv_mask = GENMASK(7, 0),
> >>>> + .drv_shift = 0,
> >>>> + .drv2_offset = 0x41,
> >>>> + .drv2_mask = GENMASK(3, 0),
> >>>> + .drv2_shift = 8,
> >>>> + .drv_en_manual_mask = 0,
> >>>> +};
> >>>> +
> >>>> /**
> >>>> * struct pm8xxx_vib - structure to hold vibrator data
> >>>> * @vib_input_dev: input device supporting force feedback
> >>>> @@ -53,6 +68,7 @@ static struct pm8xxx_regs pm8916_regs = {
> >>>> * @regs: registers' info
> >>>> * @enable_addr: vibrator enable register
> >>>> * @drv_addr: vibrator drive strength register
> >>>> + * @drv2_addr: vibrator drive strength upper byte register
> >>>> * @speed: speed of vibration set from userland
> >>>> * @active: state of vibrator
> >>>> * @level: level of vibration to set in the chip
> >>>> @@ -65,6 +81,7 @@ struct pm8xxx_vib {
> >>>> const struct pm8xxx_regs *regs;
> >>>> unsigned int enable_addr;
> >>>> unsigned int drv_addr;
> >>>> + unsigned int drv2_addr;
> >>>> int speed;
> >>>> int level;
> >>>> bool active;
> >>>> @@ -82,6 +99,10 @@ static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on)
> >>>> unsigned int val = vib->reg_vib_drv;
> >>>> const struct pm8xxx_regs *regs = vib->regs;
> >>>>
> >>>> + /* vibrator without drv2_addr needs be programmed in step increments */
> >>>
> >>> How are these two items related? Are you using vib->drv2_addr as a
> >>> marker for 'particular generation'? In such a case please use a flag
> >>> instead.
> >>>
> >>> The rest looks good to me.
> >>>
> >> Are you suggesting to add a flag in pm8xxx_vib as a discriminator for
> >> the new generation? I actually tried to avoid that because of this comment:
> >> https://lore.kernel.org/linux-arm-msm/ZgXSBiQcBEbwF060@google.com/#t
> >
> > Add a flag for level being programmed in steps or in mV. Using
> > drv2_addr instead of such flag is a hack.
> >
> Thanks Dmitry.
> Does this flag look good to you?
Yes, this is much better from my POV
>
> diff --git a/drivers/input/misc/pm8xxx-vibrator.c
> b/drivers/input/misc/pm8xxx-vibrator.c
> index 35bb6f450fd2..4708f441e5ac 100644
> --- a/drivers/input/misc/pm8xxx-vibrator.c
> +++ b/drivers/input/misc/pm8xxx-vibrator.c
> @@ -30,6 +30,7 @@ struct pm8xxx_regs {
> unsigned int drv2_mask;
> unsigned int drv2_shift;
> unsigned int drv_en_manual_mask;
> + bool drv_in_step;
> };
>
> static const struct pm8xxx_regs pm8058_regs = {
> @@ -37,6 +38,7 @@ static const struct pm8xxx_regs pm8058_regs = {
> .drv_mask = 0xf8,
> .drv_shift = 3,
> .drv_en_manual_mask = 0xfc,
> + .drv_in_step = true;
> };
>
> static struct pm8xxx_regs pm8916_regs = {
> @@ -46,6 +48,7 @@ static struct pm8xxx_regs pm8916_regs = {
> .drv_mask = 0x1F,
> .drv_shift = 0,
> .drv_en_manual_mask = 0,
> + .drv_in_step = true;
> };
>
> static struct pm8xxx_regs pmi632_regs = {
> @@ -58,6 +61,7 @@ static struct pm8xxx_regs pmi632_regs = {
> .drv2_mask = GENMASK(3, 0),
> .drv2_shift = 8,
> .drv_en_manual_mask = 0,
> + .drv_in_step = false,
> };
>
> /**
> @@ -100,7 +104,7 @@ static int pm8xxx_vib_set(struct pm8xxx_vib *vib,
> bool on)
> const struct pm8xxx_regs *regs = vib->regs;
>
> /* vibrator without drv2_addr needs be programmed in step
> increments */
> - if (!vib->drv2_addr)
> + if (regs->drv_in_step)
> vib->level /= VIB_PER_STEP_mV(vib);
>
> if (on)
>
>
> >>
> >>>> + if (!vib->drv2_addr)
> >>>> + vib->level /= VIB_PER_STEP_mV(vib);
> >>>> +
> >>>> if (on)
> >>>> val |= (vib->level << regs->drv_shift) & regs->drv_mask;
> >>>> else
> >>>> @@ -93,6 +114,17 @@ static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on)
> >>>>
> >>>> vib->reg_vib_drv = val;
> >>>>
> >>>> + if (regs->drv2_mask) {
> >>>> + if (on)
> >>>> + val = (vib->level << regs->drv2_shift) & regs->drv2_mask;
> >>>> + else
> >>>> + val = 0;
> >>>> +
> >>>> + rc = regmap_write_bits(vib->regmap, vib->drv2_addr, regs->drv2_mask, val);
> >>>> + if (rc < 0)
> >>>> + return rc;
> >>>> + }
> >>>> +
> >>>> if (regs->enable_mask)
> >>>> rc = regmap_update_bits(vib->regmap, vib->enable_addr,
> >>>> regs->enable_mask, on ? regs->enable_mask : 0);
> >>>> @@ -115,17 +147,16 @@ static void pm8xxx_work_handler(struct work_struct *work)
> >>>> return;
> >>>>
> >>>> /*
> >>>> - * pmic vibrator supports voltage ranges from 1.2 to 3.1V, so
> >>>> + * pmic vibrator supports voltage ranges from MIN_LEVEL to MAX_LEVEL, so
> >>>> * scale the level to fit into these ranges.
> >>>> */
> >>>> if (vib->speed) {
> >>>> vib->active = true;
> >>>> - vib->level = ((VIB_MAX_LEVELS * vib->speed) / MAX_FF_SPEED) +
> >>>> - VIB_MIN_LEVEL_mV;
> >>>> - vib->level /= VIB_PER_STEP_mV;
> >>>> + vib->level = VIB_MIN_LEVEL_mV(vib);
> >>>> + vib->level += mult_frac(VIB_MAX_LEVELS(vib), vib->speed, MAX_FF_SPEED);
> >>>> } else {
> >>>> vib->active = false;
> >>>> - vib->level = VIB_MIN_LEVEL_mV / VIB_PER_STEP_mV;
> >>>> + vib->level = VIB_MIN_LEVEL_mV(vib);
> >>>> }
> >>>>
> >>>> pm8xxx_vib_set(vib, vib->active);
> >>>> @@ -203,6 +234,7 @@ static int pm8xxx_vib_probe(struct platform_device *pdev)
> >>>>
> >>>> vib->enable_addr = reg_base + regs->enable_offset;
> >>>> vib->drv_addr = reg_base + regs->drv_offset;
> >>>> + vib->drv2_addr = reg_base + regs->drv2_offset;
> >>>>
> >>>> /* operate in manual mode */
> >>>> error = regmap_read(vib->regmap, vib->drv_addr, &val);
> >>>> @@ -257,6 +289,7 @@ static const struct of_device_id pm8xxx_vib_id_table[] = {
> >>>> { .compatible = "qcom,pm8058-vib", .data = &pm8058_regs },
> >>>> { .compatible = "qcom,pm8921-vib", .data = &pm8058_regs },
> >>>> { .compatible = "qcom,pm8916-vib", .data = &pm8916_regs },
> >>>> + { .compatible = "qcom,pmi632-vib", .data = &pmi632_regs },
> >>>> { }
> >>>> };
> >>>> MODULE_DEVICE_TABLE(of, pm8xxx_vib_id_table);
> >>>>
> >>>> --
> >>>> 2.25.1
> >>>>
> >>>>
> >>>
> >>>
> >
> >
> >
--
With best wishes
Dmitry
Powered by blists - more mailing lists