linux-kernel - Re: [PATCH 3/6] arm64: dts: broadcom: Add support for BCM2712

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Mon, 15 Apr 2024 10:20:47 +0200
From: Stefan Wahren <wahrenst@....net>
To: Andrea della Porta <andrea.porta@...e.com>, Rob Herring
 <robh@...nel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
 Conor Dooley <conor+dt@...nel.org>,
 Florian Fainelli <florian.fainelli@...adcom.com>,
 Linus Walleij <linus.walleij@...aro.org>,
 Jonathan Bell <jonathan@...pberrypi.com>, Phil Elwell <phil@...pberrypi.com>
Cc: Ulf Hansson <ulf.hansson@...aro.org>,
 Adrian Hunter <adrian.hunter@...el.com>,
 Broadcom internal kernel review list
 <bcm-kernel-feedback-list@...adcom.com>, linux-kernel@...r.kernel.org,
 Al Cooper <alcooperx@...il.com>, linux-mmc@...r.kernel.org,
 Kamal Dasu <kamal.dasu@...adcom.com>, linux-arm-kernel@...ts.infradead.org,
 devicetree@...r.kernel.org, linux-gpio@...r.kernel.org
Subject: Re: [PATCH 3/6] arm64: dts: broadcom: Add support for BCM2712

Hi Phil,

Am 14.04.24 um 00:14 schrieb Andrea della Porta:
> Signed-off-by: Andrea della Porta <andrea.porta@...e.com>
> ---
>   arch/arm64/boot/dts/broadcom/Makefile         |   1 +
>   .../boot/dts/broadcom/bcm2712-rpi-5-b.dts     | 313 +++++++
>   arch/arm64/boot/dts/broadcom/bcm2712-rpi.dtsi |  81 ++
>   arch/arm64/boot/dts/broadcom/bcm2712.dtsi     | 841 ++++++++++++++++++
>   4 files changed, 1236 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
>   create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712-rpi.dtsi
>   create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712.dtsi
>
> diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
> index 8b4591ddd27c..92565e9781ad 100644
> --- a/arch/arm64/boot/dts/broadcom/Makefile
> +++ b/arch/arm64/boot/dts/broadcom/Makefile
> @@ -6,6 +6,7 @@ DTC_FLAGS := -@
>   dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
>   			      bcm2711-rpi-4-b.dtb \
>   			      bcm2711-rpi-cm4-io.dtb \
> +			      bcm2712-rpi-5-b.dtb \
>   			      bcm2837-rpi-3-a-plus.dtb \
>   			      bcm2837-rpi-3-b.dtb \
>   			      bcm2837-rpi-3-b-plus.dtb \
> diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
> new file mode 100644
> index 000000000000..2ce180a54e5b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
> @@ -0,0 +1,313 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/pwm/pwm.h>
> +#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
> +
> +#define spi0 _spi0
> +#define uart0 _uart0
> +
> +#include "bcm2712.dtsi"
> +
> +#undef spi0
> +#undef uart0
> +
> +/ {
> +	compatible = "raspberrypi,5-model-b", "brcm,bcm2712";
> +	model = "Raspberry Pi 5";
> +
>
according to this downstream commit [1] it's just called "Raspberry Pi
5" without Model B, but the filename and the compatible says something
different. Is there still a chance to get this consistent or is it too
late because the firmware expect the compatible?

[1] -
https://github.com/raspberrypi/linux/commit/99e359d2f2da2c820fd2a30b1ad08b32c9549adb