[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <6f64a875911eff522674e9a22b6dc23ec629db3a.camel@ew.tq-group.com>
Date: Wed, 17 Apr 2024 12:07:32 +0200
From: Matthias Schiffer <matthias.schiffer@...tq-group.com>
To: "Russell King (Oracle)" <linux@...linux.org.uk>
Cc: Andrew Lunn <andrew@...n.ch>, Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>, "David S. Miller"
<davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski
<kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux@...tq-group.com
Subject: Re: [PATCH net] net: dsa: mv88e6xx: fix supported_interfaces setup
in mv88e6250_phylink_get_caps()
On Wed, 2024-04-17 at 09:13 +0200, Matthias Schiffer wrote:
> On Tue, 2024-04-16 at 17:56 +0100, Russell King (Oracle) wrote:
> > On Tue, Apr 16, 2024 at 05:50:54PM +0200, Matthias Schiffer wrote:
> > > +int mv88e6250_port_get_mode(struct mv88e6xxx_chip *chip, int port,
> > > + phy_interface_t *mode)
> > > +{
> > > + int err;
> > > + u16 reg;
> > > +
> > > + if (port < 5) {
> > > + *mode = PHY_INTERFACE_MODE_INTERNAL;
> > > + return 0;
> > > + }
> >
> > Note that if mv88e6xxx_phy_is_internal() returns TRUE for the port,
> > then this will be handled automatically.
> >
> > > +
> > > + err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, ®);
> > > + if (err)
> > > + return err;
> > > +
> > > + switch (reg & MV88E6250_PORT_STS_PORTMODE_MASK) {
> > > + case MV88E6250_PORT_STS_PORTMODE_MII_10_HALF_PHY:
> > > + case MV88E6250_PORT_STS_PORTMODE_MII_100_HALF_PHY:
> > > + case MV88E6250_PORT_STS_PORTMODE_MII_10_FULL_PHY:
> > > + case MV88E6250_PORT_STS_PORTMODE_MII_100_FULL_PHY:
> > > + *mode = PHY_INTERFACE_MODE_REVMII;
> > > + break;
> > > +
> > > + case MV88E6250_PORT_STS_PORTMODE_MII_HALF:
> > > + case MV88E6250_PORT_STS_PORTMODE_MII_FULL:
> > > + *mode = PHY_INTERFACE_MODE_MII;
> > > + break;
> > > +
> > > + case MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL_PHY:
> > > + case MV88E6250_PORT_STS_PORTMODE_MII_200_RMII_FULL_PHY:
> > > + case MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_HALF_PHY:
> > > + case MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL_PHY:
> > > + *mode = PHY_INTERFACE_MODE_REVRMII;
> > > + break;
> > > +
> > > + case MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL:
> > > + case MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL:
> > > + *mode = PHY_INTERFACE_MODE_RMII;
> > > + break;
> > > +
> > > + case MV88E6250_PORT_STS_PORTMODE_MII_100_RGMII:
> > > + *mode = PHY_INTERFACE_MODE_RGMII;
> > > + break;
> > > +
> > > + default:
> > > + *mode = PHY_INTERFACE_MODE_NA;
> >
> > What does this mean? I don't allow PHY_INTERFACE_MODE_NA to be set in
> > the list of supported interfaces because it isn't an interface mode.
> > If it's invalid, then it's probably best to return an error.
> >
> > I wonder whether it would just be better to pass the
> > supported_interfaces bitmap into this function and have it set the
> > appropriate bit itself, renaming the function to something more
> > better suited to that purpose.
> >
> > Thanks.
>
> I'm explicitly checking for PHY_INTERFACE_MODE_NA in the caller to handle the "this interface isn't
> useable" case. Passing supported_interfaces into the function handling the port modes is fine with
> me, too - will send a v2 later.
>
> Best regards,
> Matthias
.. and I realize I don't even check for PHY_INTERFACE_MODE_NA in the caller in the version of the
patch I submitted. Oh well, time for v2.
>
>
> >
>
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/
Powered by blists - more mailing lists