| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAJZ5v0hHbnVb8jnqd+o-GMS+Pw=UMq-7LQekBWWpNqTkBNfUWA@mail.gmail.com>
Date: Mon, 22 Apr 2024 19:00:15 +0200
From: "Rafael J. Wysocki" <rafael@...nel.org>
To: Vanshidhar Konda <vanshikonda@...amperecomputing.com>
Cc: Jarred White <jarredwhite@...ux.microsoft.com>,
Easwar Hariharan <eahariha@...ux.microsoft.com>,
"Rafael J . Wysocki" <rafael.j.wysocki@...el.com>, linux-acpi@...r.kernel.org,
linux-kernel@...r.kernel.org, "5 . 15+" <stable@...r.kernel.org>
Subject: Re: [PATCH v3] ACPI: CPPC: Fix access width used for PCC registers
On Fri, Apr 12, 2024 at 1:18 AM Vanshidhar Konda
<vanshikonda@...amperecomputing.com> wrote:
>
> commit 2f4a4d63a193be6fd530d180bb13c3592052904c modified
> cpc_read/cpc_write to use access_width to read CPC registers. For PCC
> registers the access width field in the ACPI register macro specifies
> the PCC subspace id. For non-zero PCC subspace id the access width is
> incorrectly treated as access width. This causes errors when reading
> from PCC registers in the CPPC driver.
>
> For PCC registers base the size of read/write on the bit width field.
> The debug message in cpc_read/cpc_write is updated to print relevant
> information for the address space type used to read the register.
>
> Signed-off-by: Vanshidhar Konda <vanshikonda@...amperecomputing.com>
> Tested-by: Jarred White <jarredwhite@...ux.microsoft.com>
> Reviewed-by: Jarred White <jarredwhite@...ux.microsoft.com>
> Reviewed-by: Easwar Hariharan <eahariha@...ux.microsoft.com>
> Cc: 5.15+ <stable@...r.kernel.org> # 5.15+
> ---
>
> When testing v6.9-rc1 kernel on AmpereOne system dmesg showed that
> cpufreq policy had failed to initialize on some cores during boot because
> cpufreq->get() always returned 0. On this system CPPC registers are in PCC
> subspace index 2 that are 32 bits wide. With this patch the CPPC driver
> interpreted the access width field as 16 bits, causing the register read
> to roll over too quickly to provide valid values during frequency
> computation.
>
> v2:
> - Use size variable in debug print message
> - Use size instead of reg->bit_width for acpi_os_read_memory and
> acpi_os_write_memory
>
> v3:
> - Fix language in error messages in cpc_read/cpc_write
>
> drivers/acpi/cppc_acpi.c | 53 ++++++++++++++++++++++++++++------------
> 1 file changed, 37 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
> index 4bfbe55553f4..7d476988fae3 100644
> --- a/drivers/acpi/cppc_acpi.c
> +++ b/drivers/acpi/cppc_acpi.c
> @@ -1002,14 +1002,14 @@ static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val)
> }
>
> *val = 0;
> + size = GET_BIT_WIDTH(reg);
>
> if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
> - u32 width = GET_BIT_WIDTH(reg);
> u32 val_u32;
> acpi_status status;
>
> status = acpi_os_read_port((acpi_io_address)reg->address,
> - &val_u32, width);
> + &val_u32, size);
> if (ACPI_FAILURE(status)) {
> pr_debug("Error: Failed to read SystemIO port %llx\n",
> reg->address);
> @@ -1018,17 +1018,22 @@ static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val)
>
> *val = val_u32;
> return 0;
> - } else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0)
> + } else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0) {
> + /*
> + * For registers in PCC space, the register size is determined
> + * by the bit width field; the access size is used to indicate
> + * the PCC subspace id.
> + */
> + size = reg->bit_width;
> vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id);
> + }
> else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
> vaddr = reg_res->sys_mem_vaddr;
> else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE)
> return cpc_read_ffh(cpu, reg, val);
> else
> return acpi_os_read_memory((acpi_physical_address)reg->address,
> - val, reg->bit_width);
> -
> - size = GET_BIT_WIDTH(reg);
> + val, size);
>
> switch (size) {
> case 8:
> @@ -1044,8 +1049,13 @@ static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val)
> *val = readq_relaxed(vaddr);
> break;
> default:
> - pr_debug("Error: Cannot read %u bit width from PCC for ss: %d\n",
> - reg->bit_width, pcc_ss_id);
> + if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
> + pr_debug("Error: Cannot read %u bit width from system memory: 0x%llx\n",
> + size, reg->address);
> + } else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) {
> + pr_debug("Error: Cannot read %u bit width from PCC for ss: %d\n",
> + size, pcc_ss_id);
> + }
> return -EFAULT;
> }
>
> @@ -1063,12 +1073,13 @@ static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val)
> int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
> struct cpc_reg *reg = ®_res->cpc_entry.reg;
>
> + size = GET_BIT_WIDTH(reg);
> +
> if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
> - u32 width = GET_BIT_WIDTH(reg);
> acpi_status status;
>
> status = acpi_os_write_port((acpi_io_address)reg->address,
> - (u32)val, width);
> + (u32)val, size);
> if (ACPI_FAILURE(status)) {
> pr_debug("Error: Failed to write SystemIO port %llx\n",
> reg->address);
> @@ -1076,17 +1087,22 @@ static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val)
> }
>
> return 0;
> - } else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0)
> + } else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0) {
> + /*
> + * For registers in PCC space, the register size is determined
> + * by the bit width field; the access size is used to indicate
> + * the PCC subspace id.
> + */
> + size = reg->bit_width;
> vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id);
> + }
> else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
> vaddr = reg_res->sys_mem_vaddr;
> else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE)
> return cpc_write_ffh(cpu, reg, val);
> else
> return acpi_os_write_memory((acpi_physical_address)reg->address,
> - val, reg->bit_width);
> -
> - size = GET_BIT_WIDTH(reg);
> + val, size);
>
> if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
> val = MASK_VAL(reg, val);
> @@ -1105,8 +1121,13 @@ static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val)
> writeq_relaxed(val, vaddr);
> break;
> default:
> - pr_debug("Error: Cannot write %u bit width to PCC for ss: %d\n",
> - reg->bit_width, pcc_ss_id);
> + if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
> + pr_debug("Error: Cannot write %u bit width to system memory: 0x%llx\n",
> + size, reg->address);
> + } else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) {
> + pr_debug("Error: Cannot write %u bit width to PCC for ss: %d\n",
> + size, pcc_ss_id);
> + }
> ret_val = -EFAULT;
> break;
> }
> --
Applied as 6.9-rc material, thanks!
Powered by blists - more mailing lists