linux-kernel - Re: [PATCH] Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <7b3dc952-d202-4377-9bb6-e7598e28de97@quicinc.com>
Date: Wed, 24 Apr 2024 17:32:49 +0800
From: quic_zijuhu <quic_zijuhu@...cinc.com>
To: Bartosz Golaszewski <brgl@...ev.pl>, Wren Turkal <wt@...guintechs.org>
CC: <linux-bluetooth@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Bartosz
 Golaszewski <bartosz.golaszewski@...aro.org>,
        Marcel Holtmann
	<marcel@...tmann.org>,
        Luiz Augusto von Dentz <luiz.dentz@...il.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: Re: [PATCH] Bluetooth: qca: set power_ctrl_enabled on NULL returned
 by gpiod_get_optional()

On 4/24/2024 5:04 PM, Bartosz Golaszewski wrote:
> On Wed, 24 Apr 2024 07:07:05 +0200, Wren Turkal <wt@...guintechs.org> said:
>> On 4/22/24 6:00 AM, Bartosz Golaszewski wrote:
>>> From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
>>>
>>> Any return value from gpiod_get_optional() other than a pointer to a
>>> GPIO descriptor or a NULL-pointer is an error and the driver should
>>> abort probing. That being said: commit 56d074d26c58 ("Bluetooth: hci_qca:
>>> don't use IS_ERR_OR_NULL() with gpiod_get_optional()") no longer sets
>>> power_ctrl_enabled on NULL-pointer returned by
>>> devm_gpiod_get_optional(). Restore this behavior but bail-out on errors.
>>
>> Nack. This patch does fixes neither the disable/re-enable problem nor
>> the warm boot problem.
>>
>> Zijun replied to this patch also with what I think is the proper
>> reasoning for why it doesn't fix my setup.
>>
> 
> Indeed, I only addressed a single issue here and not the code under the
> default: label of the switch case. Sorry.
> 
> Could you give the following diff a try?
> 
> Bart
> 
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index 92fa20f5ac7d..0e98ad2c0c9d 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -2327,16 +2327,21 @@ static int qca_serdev_probe(struct
> serdev_device *serdev)
>  		    (data->soc_type == QCA_WCN6750 ||
>  		     data->soc_type == QCA_WCN6855)) {
>  			dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
> -			power_ctrl_enabled = false;
> +			return PTR_ERR(qcadev->bt_en);
>  		}
> 
> +		if (!qcadev->bt_en)
> +			power_ctrl_enabled = false;
> +
>  		qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
>  					       GPIOD_IN);
>  		if (IS_ERR(qcadev->sw_ctrl) &&
>  		    (data->soc_type == QCA_WCN6750 ||
>  		     data->soc_type == QCA_WCN6855 ||
> -		     data->soc_type == QCA_WCN7850))
> -			dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
> +		     data->soc_type == QCA_WCN7850)) {
> +			dev_err(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
> +			return PTR_ERR(qcadev->sw_ctrl);
> +		}
> 
>  		qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
>  		if (IS_ERR(qcadev->susclk)) {
> @@ -2355,10 +2360,13 @@ static int qca_serdev_probe(struct
> serdev_device *serdev)
>  		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
>  					       GPIOD_OUT_LOW);
>  		if (IS_ERR(qcadev->bt_en)) {
> -			dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
> -			power_ctrl_enabled = false;
> +			dev_err(&serdev->dev, "failed to acquire enable gpio\n");
> +			return PTR_ERR(qcadev->bt_en);
>  		}
> 
> +		if (!qcadev->bt_en)
> +			power_ctrl_enabled = false;
> +
>  		qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
>  		if (IS_ERR(qcadev->susclk)) {
>  			dev_warn(&serdev->dev, "failed to acquire clk\n");
i suggest stop here and request you code review for my changes, i found
the issue and given fix for my concern.