| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240425131415.GC3449@thinkpad>
Date: Thu, 25 Apr 2024 18:44:15 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: Krishna chaitanya chundru <quic_krichai@...cinc.com>
Cc: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kw@...ux.com>,
Bjorn Helgaas <bhelgaas@...gle.com>, johan+linaro@...nel.org,
bmasney@...hat.com, djakov@...nel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
vireshk@...nel.org, quic_vbadigan@...cinc.com,
quic_skananth@...cinc.com, quic_nitegupt@...cinc.com,
quic_parass@...cinc.com, krzysztof.kozlowski@...aro.org
Subject: Re: [PATCH v11 6/6] PCI: qcom: Add OPP support to scale performance
On Tue, Apr 23, 2024 at 02:37:00PM +0530, Krishna chaitanya chundru wrote:
> QCOM Resource Power Manager-hardened (RPMh) is a hardware block which
> maintains hardware state of a regulator by performing max aggregation of
> the requests made by all of the clients.
>
> PCIe controller can operate on different RPMh performance state of power
> domain based on the speed of the link. And this performance state varies
> from target to target, like some controllers support GEN3 in NOM (Nominal)
> voltage corner, while some other supports GEN3 in low SVS (static voltage
> scaling).
>
> The SoC can be more power efficient if we scale the performance state
> based on the aggregate PCIe link bandwidth.
>
> Add Operating Performance Points (OPP) support to vote for RPMh state based
> on the aggregate link bandwidth.
>
> OPP can handle ICC bw voting also, so move ICC bw voting through OPP
> framework if OPP entries are present.
>
> As we are moving ICC voting as part of OPP, don't initialize ICC if OPP
> is supported.
>
> Before PCIe link is initialized vote for highest OPP in the OPP table,
> so that we are voting for maximum voltage corner for the link to come up
> in maximum supported speed.
>
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@...cinc.com>
Couple of nitpicks below. With that addressed,
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> ---
> drivers/pci/controller/dwc/pcie-qcom.c | 81 ++++++++++++++++++++++++++++------
> 1 file changed, 67 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 465d63b4be1c..66bda30305a8 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -22,6 +22,7 @@
> #include <linux/of.h>
> #include <linux/of_gpio.h>
> #include <linux/pci.h>
> +#include <linux/pm_opp.h>
> #include <linux/pm_runtime.h>
> #include <linux/platform_device.h>
> #include <linux/phy/pcie.h>
> @@ -1443,15 +1444,13 @@ static int qcom_pcie_icc_init(struct qcom_pcie *pcie)
> return 0;
> }
>
> -static void qcom_pcie_icc_update(struct qcom_pcie *pcie)
> +static void qcom_pcie_icc_opp_update(struct qcom_pcie *pcie)
> {
> struct dw_pcie *pci = pcie->pci;
> - u32 offset, status;
> + u32 offset, status, freq;
> + struct dev_pm_opp *opp;
> int speed, width;
> - int ret;
> -
> - if (!pcie->icc_mem)
> - return;
> + int ret, mbps;
>
> offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> status = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA);
> @@ -1463,10 +1462,26 @@ static void qcom_pcie_icc_update(struct qcom_pcie *pcie)
> speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, status);
> width = FIELD_GET(PCI_EXP_LNKSTA_NLW, status);
>
> - ret = icc_set_bw(pcie->icc_mem, 0, width * QCOM_PCIE_LINK_SPEED_TO_BW(speed));
> - if (ret) {
> - dev_err(pci->dev, "Failed to set bandwidth for PCIe-MEM interconnect path: %d\n",
> - ret);
> + if (pcie->icc_mem) {
> + ret = icc_set_bw(pcie->icc_mem, 0, width * QCOM_PCIE_LINK_SPEED_TO_BW(speed));
> + if (ret) {
> + dev_err(pci->dev, "Failed to set bandwidth for PCIe-MEM interconnect path: %d\n",
> + ret);
> + }
> + } else {
> + mbps = pcie_link_speed_to_mbps(pcie_link_speed[speed]);
Don't use opaque variable names. Here it should be 'freq_mbps'.
> + if (mbps < 0)
> + return;
> +
> + freq = mbps * 1000;
And this should be 'freq_kbps'.
> + opp = dev_pm_opp_find_freq_exact(pci->dev, freq * width, true);
> + if (!IS_ERR(opp)) {
> + ret = dev_pm_opp_set_opp(pci->dev, opp);
> + if (ret)
> + dev_err(pci->dev, "Failed to set opp for freq (%ld): %d\n",
s/opp/OPP
> + dev_pm_opp_get_freq(opp), ret);
Frequency is already available here, no? Hint: freq_kbps * width
> + }
> + dev_pm_opp_put(opp);
> }
> }
>
> @@ -1510,7 +1525,9 @@ static void qcom_pcie_init_debugfs(struct qcom_pcie *pcie)
> static int qcom_pcie_probe(struct platform_device *pdev)
> {
> const struct qcom_pcie_cfg *pcie_cfg;
> + unsigned long max_freq = INT_MAX;
> struct device *dev = &pdev->dev;
> + struct dev_pm_opp *opp;
> struct qcom_pcie *pcie;
> struct dw_pcie_rp *pp;
> struct resource *res;
> @@ -1578,9 +1595,42 @@ static int qcom_pcie_probe(struct platform_device *pdev)
> goto err_pm_runtime_put;
> }
>
> - ret = qcom_pcie_icc_init(pcie);
> - if (ret)
> + /* OPP table is optional */
> + ret = devm_pm_opp_of_add_table(dev);
> + if (ret && ret != -ENODEV) {
> + dev_err_probe(dev, ret, "Failed to add OPP table\n");
> goto err_pm_runtime_put;
> + }
> +
> + /*
> + * Before PCIe link is initialized vote for highest OPP in the OPP table,
> + * so that we are voting for maximum voltage corner for the link to come up
> + * in maximum supported speed. At the end of the probe(), OPP will be
> + * updated using qcom_pcie_icc_opp_update().
> + */
> + if (!ret) {
> + opp = dev_pm_opp_find_freq_floor(dev, &max_freq);
> + if (IS_ERR(opp)) {
> + dev_err_probe(pci->dev, PTR_ERR(opp),
> + "Unable to find max freq OPP\n");
> + goto err_pm_runtime_put;
> + } else {
> + ret = dev_pm_opp_set_opp(dev, opp);
> + }
> +
> + dev_pm_opp_put(opp);
> + if (ret) {
> + dev_err_probe(pci->dev, ret,
> + "Failed to set OPP for freq (%ld): %d\n",
With dev_err_probe(), errno will be printed by default.
- Mani
--
மணிவண்ணன் சதாசிவம்
Powered by blists - more mailing lists