linux-kernel - Re: [PATCH v5 0/3] arm64: dts: qcom: apq8016: Add Schneider HMIBSC board DTS

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CAFA6WYNbQLz2Gio6dS2MbDT7hgNWmq27K2ng218cbYmGvQ+VhA@mail.gmail.com>
Date: Mon, 29 Apr 2024 12:51:03 +0530
From: Sumit Garg <sumit.garg@...aro.org>
To: andersson@...nel.org, konrad.dybcio@...aro.org
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org, 
	robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org, 
	stephan@...hold.net, caleb.connolly@...aro.org, neil.armstrong@...aro.org, 
	dmitry.baryshkov@...aro.org, laetitia.mariottini@...com, 
	pascal.eberhard@...com, abdou.saker@...com, jimmy.lalande@...com, 
	benjamin.missey@....se.com, daniel.thompson@...aro.org, 
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v5 0/3] arm64: dts: qcom: apq8016: Add Schneider HMIBSC
 board DTS

On Fri, 19 Apr 2024 at 20:57, Sumit Garg <sumit.garg@...aro.org> wrote:
>
> On Tue, 9 Apr 2024 at 23:24, Sumit Garg <sumit.garg@...aro.org> wrote:
> >
> > Hi Bjorn, Konrad,
> >
> > On Wed, 3 Apr 2024 at 10:04, Sumit Garg <sumit.garg@...aro.org> wrote:
> > >
> > > Add Schneider Electric HMIBSC board DTS. The HMIBSC board is an IIoT Edge
> > > Box Core board based on the Qualcomm APQ8016E SoC. For more information
> > > refer to the product page [1].
> > >
> > > One of the major difference from db410c is serial port where HMIBSC board
> > > uses UART1 as the debug console with a default RS232 mode (UART1 mode mux
> > > configured via gpio99 and gpio100).
> > >
> > > Support for Schneider Electric HMIBSC. Features:
> > > - Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306)
> > > - 1GiB RAM
> > > - 8GiB eMMC, SD slot
> > > - WiFi and Bluetooth
> > > - 2x Host, 1x Device USB port
> > > - HDMI
> > > - Discrete TPM2 chip over SPI
> > > - USB ethernet adaptors (soldered)
> > >
> > > This series is a v2 since v1 of this DTS file has been reviewed on the
> > > U-Boot mailing list [2].
> > >
> > > Changes in v5:
> > > - Addressed another nitpick from Stephen.
> > > - Collected Stephen's review tag.
> > > - Warnings reported by Rob's DT check bot aren't related to HMIBSC
> > >   board DTS but rather they are due to msm8916.dtsi or extcon-usb-gpio.txt
> > >   still not converted to YAML format.
> > >
> >
> > I haven't seen any further comments on this series, can you help to pick it up?
>
> Gentle reminder.
>

Is there anything missing on my part to get this accepted? It has
already gone through the review cycle with v5 posted for about a month
now.

-Sumit

>
> >
> > > Changes in v4:
> > > - Dropped IRQ_TYPE_EDGE_FALLING for pm8916_resin given the expectations
> > >   of Linux kernel driver. Instead depend on systemd workaround suggested
> > >   by Caleb to get expected HMIBSC reset behaviour.
> > > - Incorporated further DT coding style comments from Stephen.
> > > - Warnings reported by Rob's DT check bot aren't related to HMIBSC
> > >   board DTS but rather they are due to msm8916.dtsi or extcon-usb-gpio.txt
> > >   still not converted to YAML format.
> > >
> > > Changes in v3:
> > > - Picked up tags.
> > > - Fixed further DT schema warnings.
> > > - Configure resin/power button interrupt as falling edge.
> > > - Incorporate DTS coding style comments from Krzysztof and Konrad.
> > >
> > > Changes in v2:
> > > - Fix DT schema warnings.
> > > - Incorporate suggestions from Stephan.
> > > - Document UART1 mode GPIOs based mux.
> > >
> > > [1] https://www.se.com/us/en/product/HMIBSCEA53D1L0T/iiot-edge-box-core-harmony-ipc-emmc-dc-linux-tpm/
> > > [2] https://patchwork.ozlabs.org/project/uboot/patch/20240311111027.44577-6-sumit.garg@linaro.org/
> > >
> > > Sumit Garg (3):
> > >   dt-bindings: vendor-prefixes: Add Schneider Electric
> > >   dt-bindings: arm: qcom: Add Schneider Electric HMIBSC board
> > >   arm64: dts: qcom: apq8016: Add Schneider HMIBSC board DTS
> > >
> > >  .../devicetree/bindings/arm/qcom.yaml         |   1 +
> > >  .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
> > >  arch/arm64/boot/dts/qcom/Makefile             |   1 +
> > >  .../dts/qcom/apq8016-schneider-hmibsc.dts     | 491 ++++++++++++++++++
> > >  4 files changed, 495 insertions(+)
> > >  create mode 100644 arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts
> > >
> > > --
> > > 2.34.1
> > >