linux-kernel - Re: [PATCH v1] riscv: defconfig: Enable StarFive JH7110 drivers

Open Source and information security mailing list archives

Message-ID: <CAJM55Z810=pxc+tmgw0yS+Nx=K9h=OGFxOhvtJT7nyGGg0d_nA@mail.gmail.com>
Date: Wed, 1 May 2024 09:25:43 -0700
From: Emil Renner Berthing <emil.renner.berthing@...onical.com>
To: Palmer Dabbelt <palmer@...belt.com>, hal.feng@...rfivetech.com
Cc: Conor Dooley <conor.dooley@...rochip.com>, Paul Walmsley <paul.walmsley@...ive.com>, 
	aou@...s.berkeley.edu, emil.renner.berthing@...onical.com, 
	linux-riscv@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1] riscv: defconfig: Enable StarFive JH7110 drivers

Palmer Dabbelt wrote:
> On Tue, 02 Apr 2024 23:09:02 PDT (-0700), hal.feng@...rfivetech.com wrote:
> > Add support for StarFive JH7110 SoC and VisionFive 2 board.
> > - Clock & reset
> > - Cache
> > - Temperature sensor
> > - PMIC (AXP15060)
> > - Restart GPIO
> > - RNG
> > - I2C
> > - SPI
> > - Quad SPI
> > - USB & USB 2.0 PHY & PCIe 2.0/USB 3.0 PHY
> > - Audio (I2S / TDM / PWM-DAC)
> > - Camera Subsystem & MIPI-CSI2 RX & D-PHY RX
> >
> > Signed-off-by: Hal Feng <hal.feng@...rfivetech.com>
> > ---
> >
> > Hi,
> >
> > As more drivers of StarFive JH7110 VisionFive 2 board are upstream,
> > add support for them in riscv defconfig.
> >
> > Best regards,
> > Hal
> >
> > ---
> >  arch/riscv/configs/defconfig | 32 ++++++++++++++++++++++++++++++++
> >  1 file changed, 32 insertions(+)
> >
> > diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
> > index fc0ec2ee13bc..a4eb66b30d95 100644
> > --- a/arch/riscv/configs/defconfig
> > +++ b/arch/riscv/configs/defconfig
> > @@ -111,6 +111,7 @@ CONFIG_PCIE_XILINX=y
> >  CONFIG_PCIE_FU740=y
> >  CONFIG_DEVTMPFS=y
> >  CONFIG_DEVTMPFS_MOUNT=y
> > +CONFIG_SIFIVE_CCACHE=y
> >  CONFIG_MTD=y
> >  CONFIG_MTD_BLOCK=y
> >  CONFIG_MTD_CFI=y
> > @@ -154,24 +155,36 @@ CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
> >  CONFIG_VIRTIO_CONSOLE=y
> >  CONFIG_HW_RANDOM=y
> >  CONFIG_HW_RANDOM_VIRTIO=y
> > +CONFIG_HW_RANDOM_JH7110=m
> > +CONFIG_I2C=y
> >  CONFIG_I2C_CHARDEV=m
> > +CONFIG_I2C_DESIGNWARE_PLATFORM=y
> >  CONFIG_I2C_MV64XXX=m
> >  CONFIG_I2C_RIIC=y
> >  CONFIG_SPI=y
> > +CONFIG_SPI_CADENCE_QUADSPI=m
> > +CONFIG_SPI_PL022=m
> >  CONFIG_SPI_RSPI=m
> >  CONFIG_SPI_SIFIVE=y
> >  CONFIG_SPI_SUN6I=y
> >  # CONFIG_PTP_1588_CLOCK is not set
> >  CONFIG_GPIO_SIFIVE=y
> > +CONFIG_POWER_RESET_GPIO_RESTART=y
> > +CONFIG_SENSORS_SFCTEMP=y

If this needs an update anyway this temperature sensor shouldn't be critical to
boot and can be left as a module.

/Emil

> >  CONFIG_CPU_THERMAL=y
> >  CONFIG_DEVFREQ_THERMAL=y
> >  CONFIG_RZG2L_THERMAL=y
> >  CONFIG_WATCHDOG=y
> >  CONFIG_SUNXI_WATCHDOG=y
> >  CONFIG_RENESAS_RZG2LWDT=y
> > +CONFIG_MFD_AXP20X_I2C=y
> >  CONFIG_REGULATOR=y
> >  CONFIG_REGULATOR_FIXED_VOLTAGE=y
> > +CONFIG_REGULATOR_AXP20X=y
> >  CONFIG_REGULATOR_GPIO=y
> > +CONFIG_MEDIA_SUPPORT=m
> > +CONFIG_V4L_PLATFORM_DRIVERS=y
> > +CONFIG_VIDEO_CADENCE_CSI2RX=m
> >  CONFIG_DRM=m
> >  CONFIG_DRM_RADEON=m
> >  CONFIG_DRM_NOUVEAU=m
> > @@ -183,6 +196,10 @@ CONFIG_SOUND=y
> >  CONFIG_SND=y
> >  CONFIG_SND_SOC=y
> >  CONFIG_SND_SOC_RZ=m
> > +CONFIG_SND_DESIGNWARE_I2S=m
> > +CONFIG_SND_SOC_STARFIVE=m
> > +CONFIG_SND_SOC_JH7110_PWMDAC=m
> > +CONFIG_SND_SOC_JH7110_TDM=m
> >  CONFIG_SND_SOC_WM8978=m
> >  CONFIG_SND_SIMPLE_CARD=m
> >  CONFIG_USB=y
> > @@ -196,6 +213,11 @@ CONFIG_USB_OHCI_HCD_PLATFORM=y
> >  CONFIG_USB_RENESAS_USBHS=m
> >  CONFIG_USB_STORAGE=y
> >  CONFIG_USB_UAS=y
> > +CONFIG_USB_CDNS_SUPPORT=m
> > +CONFIG_USB_CDNS3=m
> > +CONFIG_USB_CDNS3_GADGET=y
> > +CONFIG_USB_CDNS3_HOST=y
> > +CONFIG_USB_CDNS3_STARFIVE=m
> >  CONFIG_USB_MUSB_HDRC=m
> >  CONFIG_USB_MUSB_SUNXI=m
> >  CONFIG_NOP_USB_XCEIV=m
> > @@ -233,6 +255,13 @@ CONFIG_VIRTIO_BALLOON=y
> >  CONFIG_VIRTIO_INPUT=y
> >  CONFIG_VIRTIO_MMIO=y
> >  CONFIG_RENESAS_OSTM=y
> > +CONFIG_STAGING=y
> > +CONFIG_STAGING_MEDIA=y
> g
> I don't think we want staging on in defconfig.
>
> > +CONFIG_VIDEO_STARFIVE_CAMSS=m
>
> Is it just for this?  I think we can just exclude that from defconfig
> until it gets out of staging, we should be able to boot without it.
> According to the TODO userspace isn't there yet, so I think it should be
> pretty safe.
>
> > +CONFIG_CLK_STARFIVE_JH7110_AON=y
> > +CONFIG_CLK_STARFIVE_JH7110_STG=y
> > +CONFIG_CLK_STARFIVE_JH7110_ISP=y
> > +CONFIG_CLK_STARFIVE_JH7110_VOUT=y
> >  CONFIG_SUN8I_DE2_CCU=m
> >  CONFIG_SUN50I_IOMMU=y
> >  CONFIG_RPMSG_CHAR=y
> > @@ -244,6 +273,9 @@ CONFIG_RZG2L_ADC=m
> >  CONFIG_RESET_RZG2L_USBPHY_CTRL=y
> >  CONFIG_PHY_SUN4I_USB=m
> >  CONFIG_PHY_RCAR_GEN3_USB2=y
> > +CONFIG_PHY_STARFIVE_JH7110_DPHY_RX=m
> > +CONFIG_PHY_STARFIVE_JH7110_PCIE=m
> > +CONFIG_PHY_STARFIVE_JH7110_USB=m
> >  CONFIG_LIBNVDIMM=y
> >  CONFIG_NVMEM_SUNXI_SID=y
> >  CONFIG_EXT4_FS=y
> >
> > base-commit: 39cd87c4eb2b893354f3b850f916353f2658ae6f
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives