linux-kernel - Re: [PATCH 2/6] input: himax_hx83112b: add regulator handling

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <95f8d63a-0343-49c3-90b6-f91efe559841@linaro.org>
Date: Sat, 4 May 2024 14:37:30 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Felix Kaechele <felix@...chele.ca>, Job Noorman <job@...rman.info>,
 Dmitry Torokhov <dmitry.torokhov@...il.com>, Rob Herring
 <robh+dt@...nel.org>, Krzysztof Kozlowski
 <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>,
 linux-input@...r.kernel.org, devicetree@...r.kernel.org,
 linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/6] input: himax_hx83112b: add regulator handling

On 04/05/2024 04:04, Felix Kaechele wrote:
> Handle regulators used on this chip family, namely AVDD and VDD. These
> definitions are taken from the GPLv2 licensed vendor driver.
> 
> Signed-off-by: Felix Kaechele <felix@...chele.ca>
> Link: https://github.com/HimaxSoftware/HX83112_Android_Driver
> ---
>  drivers/input/touchscreen/himax_hx83112b.c | 48 ++++++++++++++++++++--
>  1 file changed, 44 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/himax_hx83112b.c b/drivers/input/touchscreen/himax_hx83112b.c
> index 4f6609dcdef3..0a797789e548 100644
> --- a/drivers/input/touchscreen/himax_hx83112b.c
> +++ b/drivers/input/touchscreen/himax_hx83112b.c
> @@ -19,10 +19,12 @@
>  #include <linux/interrupt.h>
>  #include <linux/kernel.h>
>  #include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
>  
>  #define HIMAX_ID_83112B			0x83112b
>  
>  #define HIMAX_MAX_POINTS		10
> +#define HIMAX_MAX_SUPPLIES		2
>  
>  #define HIMAX_REG_CFG_SET_ADDR		0x00
>  #define HIMAX_REG_CFG_INIT_READ		0x0c
> @@ -50,6 +52,7 @@ struct himax_event {
>  static_assert(sizeof(struct himax_event) == 56);
>  
>  struct himax_ts_data {
> +	struct regulator_bulk_data supplies[HIMAX_MAX_SUPPLIES];
>  	struct gpio_desc *gpiod_rst;
>  	struct input_dev *input_dev;
>  	struct i2c_client *client;
> @@ -63,6 +66,11 @@ static const struct regmap_config himax_regmap_config = {
>  	.val_format_endian = REGMAP_ENDIAN_LITTLE,
>  };
>  
> +static const char *const himax_supply_names[] = {
> +	"avdd",
> +	"vdd",
> +};
> +

That's confusing. Binding said only HX83100A family has regulators, but
you request for everyone.

>  static int himax_read_config(struct himax_ts_data *ts, u32 address, u32 *dst)
>  {
>  	int error;
> @@ -267,7 +275,7 @@ static irqreturn_t himax_irq_handler(int irq, void *dev_id)
>  
>  static int himax_probe(struct i2c_client *client)
>  {
> -	int error;
> +	int error, i;
>  	struct device *dev = &client->dev;
>  	struct himax_ts_data *ts;
>  
> @@ -290,11 +298,31 @@ static int himax_probe(struct i2c_client *client)
>  		return error;
>  	}
>  
> +	int num_supplies = ARRAY_SIZE(himax_supply_names);
> +
> +	for (i = 0; i < num_supplies; i++)
> +		ts->supplies[i].supply = himax_supply_names[i];
> +
> +	error = devm_regulator_bulk_get(dev,

devm_regulator_bulk_get_enable and drop rest of the code here.


> +					num_supplies,
> +					ts->supplies);

Wrap it properly at 80, not one argument in one line.

> +	if (error) {
> +		dev_err(dev, "Failed to get supplies: %d\n", error);

return dev_err_probe()

> +		return error;
> +	}
> +
> +	error = regulator_bulk_enable(num_supplies,
> +				      ts->supplies);
> +	if (error) {
> +		dev_err(dev, "Failed to enable supplies: %d\n", error);
> +		goto error_out;
> +	}
> +


Best regards,
Krzysztof