linux-kernel - Re: [PATCH v2 5/6] can: mcp251xfd: add gpio functionality

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240506-lean-strange-stork-3f7c67-mkl@pengutronix.de>
Date: Mon, 6 May 2024 11:49:44 +0200
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: Gregor Herburger <gregor.herburger@...tq-group.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>, 
	Thomas Kopp <thomas.kopp@...rochip.com>, Vincent Mailhol <mailhol.vincent@...adoo.fr>, 
	"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, 
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, Rob Herring <robh@...nel.org>, 
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>, linux-can@...r.kernel.org, 
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org, devicetree@...r.kernel.org, 
	linux@...tq-group.com
Subject: Re: [PATCH v2 5/6] can: mcp251xfd: add gpio functionality

On 06.05.2024 07:59:47, Gregor Herburger wrote:
> The mcp251xfd devices allow two pins to be configured as gpio. Add this
> functionality to driver.
> 
> Signed-off-by: Gregor Herburger <gregor.herburger@...tq-group.com>
> ---
>  drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 173 +++++++++++++++++++++++++
>  drivers/net/can/spi/mcp251xfd/mcp251xfd.h      |   6 +
>  2 files changed, 179 insertions(+)
> 
> diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
> index 4739ad80ef2a..de301f3a2f4e 100644
> --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
> +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
> @@ -16,6 +16,7 @@
>  #include <linux/bitfield.h>
>  #include <linux/clk.h>
>  #include <linux/device.h>
> +#include <linux/gpio/driver.h>
>  #include <linux/mod_devicetable.h>
>  #include <linux/module.h>
>  #include <linux/pm_runtime.h>
> @@ -1768,6 +1769,172 @@ static int mcp251xfd_register_check_rx_int(struct mcp251xfd_priv *priv)
>  	return 0;
>  }
>  
> +#ifdef CONFIG_GPIOLIB
> +static const char * const mcp251xfd_gpio_names[] = {"GPIO0", "GPIO1"};
> +
> +static int mcp251xfd_gpio_request(struct gpio_chip *chip, unsigned int offset)
> +{
> +	struct mcp251xfd_priv *priv = gpiochip_get_data(chip);
> +	u32 pin_mask = MCP251XFD_REG_IOCON_PM0 << offset;
> +	int ret;
> +
> +	if (priv->rx_int && offset == 1) {
> +		netdev_err(priv->ndev, "Can't use GPIO 1 with RX-INT!\n");
> +		return -EINVAL;
> +	}
> +
> +	ret = pm_runtime_resume_and_get(priv->ndev->dev.parent);
> +	if (ret)
> +		return ret;
> +
> +	return regmap_update_bits(priv->map_reg, MCP251XFD_REG_IOCON,
> +				  pin_mask, pin_mask);

The PM bits _should_ be 1 here, as it's the reset default.

But you have to convert mcp251xfd_chip_rx_int_enable() and
mcp251xfd_chip_rx_int_disable() to from regmap_write() to
regmap_update_bits(). Please do this in a separate patch before adding
the gpio support.

> +}

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |

Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)